JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Is200 Alloy refurb experiences

Is200 Alloy refurb experiences

Is200 Alloy refurb experiences

bean
Junior Member
12
31-08-2017, 07:25 AM
#1
When I bought my IS all of two weeks ago the alloys were in a very sorry state. Not kerbed but very corroded.
I had a bit of a look on google for places in my area (Carlisle) but ended up going on some good reviews of a place called Romax in Stockton. Gave the guy a ring and he said he could powder coat them the next day - drive in first thing and drive out in the afternoon for £48 per wheel inc. So I took a snap of the wheels before:
[Image: DSC_4030.jpg]

Not sure if you can see but the lacquer had come away and there was quite a bit of corrosion in the alloy itself.

Here's a close up of the worst 'un.
[Image: crop1.jpg]

Decided to drive over to Romax in my van so that I didn't have to walk round all day. Whipped of the wheels, stuck some labels on the tyres and off I went.

Got there at ten and when I went back at four they were ready. I was not as elated as I expected to be. The wheels looked pretty good but the finish is not brilliant, there's specks of cr@p in the clearcoat and the areas around the valve stems that had the worst corrosion still had signs of pitting. The bloke said that because they were in a bad state that's all he could do. Anyhoo here's the pics of them on the car - still a vast improvement and 99% OK but not perfect.

[Image: DSC_4038.jpg]

[Image: DSC_4039.jpg]

[Image: DSC_4040.jpg]

[Image: DSC_4043.jpg]

And here's the pitting

[Image: DSC_4041.jpg]

[Image: DSC_4042.jpg]

Hard to tell on the photo's but I got the sense that a little bit more time on the prep and a touch more care with the finish and they would be perfect. Still did do them in one day so perhaps I expected too much.


Look alright from unless you are pernickety ....
[Image: DSC_4044.jpg]
bean
31-08-2017, 07:25 AM #1

When I bought my IS all of two weeks ago the alloys were in a very sorry state. Not kerbed but very corroded.
I had a bit of a look on google for places in my area (Carlisle) but ended up going on some good reviews of a place called Romax in Stockton. Gave the guy a ring and he said he could powder coat them the next day - drive in first thing and drive out in the afternoon for £48 per wheel inc. So I took a snap of the wheels before:
[Image: DSC_4030.jpg]

Not sure if you can see but the lacquer had come away and there was quite a bit of corrosion in the alloy itself.

Here's a close up of the worst 'un.
[Image: crop1.jpg]

Decided to drive over to Romax in my van so that I didn't have to walk round all day. Whipped of the wheels, stuck some labels on the tyres and off I went.

Got there at ten and when I went back at four they were ready. I was not as elated as I expected to be. The wheels looked pretty good but the finish is not brilliant, there's specks of cr@p in the clearcoat and the areas around the valve stems that had the worst corrosion still had signs of pitting. The bloke said that because they were in a bad state that's all he could do. Anyhoo here's the pics of them on the car - still a vast improvement and 99% OK but not perfect.

[Image: DSC_4038.jpg]

[Image: DSC_4039.jpg]

[Image: DSC_4040.jpg]

[Image: DSC_4043.jpg]

And here's the pitting

[Image: DSC_4041.jpg]

[Image: DSC_4042.jpg]

Hard to tell on the photo's but I got the sense that a little bit more time on the prep and a touch more care with the finish and they would be perfect. Still did do them in one day so perhaps I expected too much.


Look alright from unless you are pernickety ....
[Image: DSC_4044.jpg]

DaveEdin
Posting Freak
5,657
31-08-2017, 08:00 AM
#2
Looks loads better than it did, though...
DaveEdin
31-08-2017, 08:00 AM #2

Looks loads better than it did, though...

spikes
Posting Freak
1,153
31-08-2017, 09:42 AM
#3
loads better mate, just look after them by keeping them clean and polish n wax them regulary:thumbup1:

spikes
spikes
31-08-2017, 09:42 AM #3

loads better mate, just look after them by keeping them clean and polish n wax them regulary:thumbup1:


spikes

Lexuspat
Administrator
6,827
01-09-2017, 12:25 PM
#4
look alot better mate and for 1 day turn around it cant be bad people loose theres for up to two weeks at places

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
01-09-2017, 12:25 PM #4

look alot better mate and for 1 day turn around it cant be bad people loose theres for up to two weeks at places


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

bean
Junior Member
12
02-09-2017, 01:27 PM
#5
48 pound each mate.
bean
02-09-2017, 01:27 PM #5

48 pound each mate.

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 4
Views 331
13-12-2023, 02:06 PM
Last Post by Moley
Replies 3
Views 470
09-11-2023, 03:46 AM
Last Post by Dinho
Replies 17
Views 706
06-11-2022, 01:49 AM
Last Post by Rabster
Replies 4
Views 1,207
02-11-2022, 10:55 AM
Last Post by Sparkystav
Replies 2
Views 305
06-08-2022, 11:58 AM
Last Post by Brad92
Replies 38
Views 1,176
23-02-2022, 01:20 PM
Last Post by beamstezza
Replies 2
Views 353
18-10-2021, 02:04 AM
Last Post by Rabster
Replies 7
Views 462
03-09-2021, 11:04 AM
Last Post by FOSSIL FUELS
Replies 1
Views 489
29-08-2021, 09:59 AM
Last Post by Sparkystav
Replies 35
Views 7,725
04-08-2021, 04:34 AM
Last Post by cjoseph