my is200
my is200
okay i havent posted on here in a long time im on here everyday doe.... anyway ive made alot of changes which im going to show you aswell as a few problems. please be paitent. firstly the problems. any comments will be much appreciated.
#1 a rubbing noise when cornering and sometimes braking, ive narrowed it down to the back left and after a closer look the spring on the caliper is moving around. is this normal as the pads can move around too
is there anything wrong here?
#2 when checking the wheels today i jacked up all four wheels gave them a few spins and noticed a simliar rubbing noise to my first problem. i made a video of the front two wheels spinning as the drives side spins quite freely but the passenger side moves more slowly. again is this normal.
drivers side
passenger side
finally #3 squeeking noise while turning the well. i think my car runs quite loudly anyway the drive belts. when i turn the wheel in any direction it gets louder. again i made a video
okay now the good things i have spent alot of time and money on small changes. i brought a rear spoiler off 'asi' and a converted sat nav screen off 'sparkystav' aswell as a jvc screen plus digital tv and a reversing camera and chorme AC dial covers and momo gear knob. o yeah and i have a remote start module fitted. I done the brake to fog conversion and my own unique day time running lights which i hope you like.
picture time
remote start video
thank you for looking
Looks good mate,
the rear brake your missing a clip i think:
This is mine:
See the clip on the top, you just have some spring, so i assume your pads will move a lot.
thanks
i ordered two of those today and 2 pad pins and clips from toyota should have them fitted on the weekend. i had them changed in january the rear pads and discs they do look really different without the top spring.
2 questions:
1) Where are the day runners, cant see them mate?
2) where did you get remote start and what is it?
1)spring coulb be off a bic pen and it is no good!!
2)you have a seized slide,pad or piston on the n/s(passenger side)
3)your powersteering belt is slipping slightly and req adjustment..
nice car by the way!!
day time running lights are the indicator lights on all the time like the new bmw's and volvos i modded the bulb holder to put in a double filiment bulb so they turn on with the park lights and still flash when indicating
the remote start is a module add on to the factor alarm
Avital 4103 it starts the car from the press of the remote without a key and the doors are still locked but cannot be driven if the brakes handbreak or bonnet is opended it shuts down.
http://www.avital.com/products/Product.aspx?id=5004
ormi 1)spring coulb be off a bic pen and it is no good!!
2)you have a seized slide,pad or piston on the n/s(passenger side)
nice car by the way!!
ormi 1)spring coulb be off a bic pen and it is no good!!
2)you have a seized slide,pad or piston on the n/s(passenger side)
nice car by the way!!
loving the indicators!!!
you've already fixed the spring by ordering the clips from toyota..
you will need too strip the caliper and check all the moving parts....not too hard..
okay thanks alot mate will have another look on the weekend