JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza auto close window unit

auto close window unit

auto close window unit

jay_russell
Posting Freak
Find
3,005
17-10-2017, 11:13 AM
#1
well i'm about to fit one of these systems to my is200 and wanted to know about fitting them. is it better to run the wires to each window or just fit them to loom at the fuse panel. and one done one of these who can offer any advice
Reply
Reply
jay_russell
17-10-2017, 11:13 AM #1

well i'm about to fit one of these systems to my is200 and wanted to know about fitting them. is it better to run the wires to each window or just fit them to loom at the fuse panel. and one done one of these who can offer any advice

Reply
Reply
Sparkystav
Administrator
Website Find
14,683
17-10-2017, 11:43 AM
#2
Depends how you need to wire it mate to be honest,
[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Reply
Reply
Sparkystav
17-10-2017, 11:43 AM #2

Depends how you need to wire it mate to be honest,

[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team

Reply
Reply
Rabster
Posting Freak
Find
10,234
17-10-2017, 11:45 AM
#3
what unit are you intending on fitting ?
Reply
Reply
Rabster
17-10-2017, 11:45 AM #3

what unit are you intending on fitting ?

Reply
Reply
jay_russell
Posting Freak
Find
3,005
17-10-2017, 12:15 PM
#4
i got a china unit i guess. but what i need to know is are they a + or - system.
all i got was this
[Image: window.jpg]
Reply
Reply
jay_russell
17-10-2017, 12:15 PM #4

i got a china unit i guess. but what i need to know is are they a + or - system.
all i got was this
[Image: window.jpg]

Reply
Reply
Rabster
Posting Freak
Find
10,234
17-10-2017, 12:21 PM
#5
the positive and negative wont mater i think as this replaces the link on the up side of the window circuit

what will you be using to trigger the closure from the alarm ?
Reply
Reply
Rabster
17-10-2017, 12:21 PM #5

the positive and negative wont mater i think as this replaces the link on the up side of the window circuit

what will you be using to trigger the closure from the alarm ?

Reply
Reply
Sparkystav
Administrator
Website Find
14,683
17-10-2017, 12:22 PM
#6
You need to run wires to all the doors mate, the lexus uses a multiplex from the drivers switch.
And the fuses dont go straight to the motors you'll have to run wires to all doors.
[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Reply
Reply
Sparkystav
17-10-2017, 12:22 PM #6

You need to run wires to all the doors mate, the lexus uses a multiplex from the drivers switch.
And the fuses dont go straight to the motors you'll have to run wires to all doors.

[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team

Reply
Reply
Sparkystav
Administrator
Website Find
14,683
17-10-2017, 12:23 PM
#7
And its positive you need mate, as you need so send a positive signal as its always connected to the ground signal.
[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Reply
Reply
Sparkystav
17-10-2017, 12:23 PM #7

And its positive you need mate, as you need so send a positive signal as its always connected to the ground signal.

[Image: LexuS-Copy.jpg]
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team

Reply
Reply
Rabster
Posting Freak
Find
10,234
17-10-2017, 12:24 PM
#8
ahh yes sorry i was thinking from when i installed my original system
Reply
Reply
Rabster
17-10-2017, 12:24 PM #8

ahh yes sorry i was thinking from when i installed my original system

Reply
Reply
jay_russell
Posting Freak
Find
3,005
17-10-2017, 01:11 PM
#9
trigger will be the same as my folding mirrors i guess. or can i take it from the door lock ?
Reply
Reply
jay_russell
17-10-2017, 01:11 PM #9

trigger will be the same as my folding mirrors i guess. or can i take it from the door lock ?

Reply
Reply
Rabster
Posting Freak
Find
10,234
17-10-2017, 01:20 PM
#10
you will need to take it from the relay output of the folding mirrors the standard alarm output is not of high enough current
Reply
Reply
Rabster
17-10-2017, 01:20 PM #10

you will need to take it from the relay output of the folding mirrors the standard alarm output is not of high enough current

Reply
Reply
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
is200 auto wiring diagram?
by el_bandido
Replies 3
Views 308
12-06-2021, 09:38 AM
Last Post by el_bandido
Window tints
by Dub///15
Replies 0
Views 141
15-07-2020, 06:55 AM
Last Post by Dub///15
Auto Electrician
by parthiban
Replies 3
Views 227
22-11-2019, 02:45 PM
Last Post by Sparkystav
Picked up an OEM sat nav dash unit - retro fit a TomTom?
by Matt_C
Replies 20
Views 911
18-07-2019, 04:13 AM
Last Post by Matt_C
Auto mirror folding - can it be done so...
by Matt_C
Replies 9
Views 474
27-06-2019, 09:37 PM
Last Post by Rabster
Manual or Auto?
by Matt_C
Replies 16
Views 602
18-06-2019, 11:35 AM
Last Post by Matt_C
IS300 Auto Levelling Headlight Sensor
by jasons
Replies 2
Views 282
09-05-2019, 12:39 PM
Last Post by jasons
IS200 Leccy Window Issue
by Barry
Replies 6
Views 379
16-12-2018, 11:11 AM
Last Post by Barry
Clicking noise (Auto / IS300 owners)
by jimxms
Replies 10
Views 774
16-04-2018, 04:32 AM
Last Post by parthiban
Altezza Auto
by James S
Replies 7
Views 699
14-11-2017, 04:43 AM
Last Post by Bandit