Fitting IS300 exhaust on an IS200
Fitting IS300 exhaust on an IS200
I have an is300 exhaust and want to fit to an is200 now it looks identical in length etc so that won't be a problem
However
The is300 has the sensor located precat I believe where as the is200 is located post cat so my sensor won't reach
Do I need to remove and rework wiring can I get a sensor bypass or anything
Think this is a poor design lol
Cheers
Rabs
Morning all well as title says really lol
I have an is300 exhaust and want to fit to an is200 now it looks identical in length etc so that won't be a problem
However
The is300 has the sensor located precat I believe where as the is200 is located post cat so my sensor won't reach
Do I need to remove and rework wiring can I get a sensor bypass or anything
Think this is a poor design lol
Cheers
Rabs
Dark Samurai
08-12-2017, 01:51 PM #2Oh mate, I believe the 300 has an extra O2 sensor. So that may be the extra hole.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Think this has been brought up by someone they had to get a hole drilled and a threaded nut welded on so the sensor could be fitted.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Dark Samurai Oh mate, I believe the 300 has an extra O2 sensor. So that may be the extra hole.
no not an extra hole infact no hole after the cat wrong place to work on a 200 so guess ur gonna have the same issue when you buy demons as the hole will be in the wrong place for that one....
Dark Samurai Oh mate, I believe the 300 has an extra O2 sensor. So that may be the extra hole.
no not an extra hole infact no hole after the cat wrong place to work on a 200 so guess ur gonna have the same issue when you buy demons as the hole will be in the wrong place for that one....
Dark Samurai
09-12-2017, 12:53 AM #5Ah should be ok, just get it drilled and a thread welded there. Our Bank 2 Sensor 2 heater element doesn't work anyway lol, so will show up a fault code if it's in there or not.
bank 2 sensor 2 would be located on the Manifold in the engine bay surely not under the car, unless the 300 only has those 2 sensors and not one under the car?
you will still have the problem that the hole will be in the wrong place on your new exhaust so you will have to get one hole welded shut and one hole drilled.
my question still stands though can i get a Simulator to plug on to save drilling the hole ?
Oli i could be wrong but thats not the sensors i am talking about
bank 2 sensor 2 would be located on the Manifold in the engine bay surely not under the car, unless the 300 only has those 2 sensors and not one under the car?
you will still have the problem that the hole will be in the wrong place on your new exhaust so you will have to get one hole welded shut and one hole drilled.
my question still stands though can i get a Simulator to plug on to save drilling the hole ?
![[Image: is-300-o2-sensor-location.jpg]](http://is300.fidke.com/pics/o2-sensor/is-300-o2-sensor-location.jpg)
1 Guest(s)
1 Guest(s)
Views 542
Last Post by
Views 913
Last Post by
Views 3,043
Last Post by
Views 370
Last Post by
Views 1,592
Last Post by
Views 411
Last Post by
Views 576
Last Post by
Views 532
Last Post by
Views 8,064
Last Post by