Back box fitting...
Back box fitting...
15-01-2018, 12:26 PM
![[Image: img3185ec.jpg]](http://img714.imageshack.us/img714/2859/img3185ec.jpg)
their is 4 rubbers
![[Image: img3186ok.jpg]](http://img25.imageshack.us/img25/3484/img3186ok.jpg)
next remove the two 14mm bolts with the springs on them..i used a spanner on the 14mm's as you cant get a socket on to the top one
![[Image: img3188f.jpg]](http://img580.imageshack.us/img580/592/img3188f.jpg)
and the hard one...
![[Image: img3189w.jpg]](http://img683.imageshack.us/img683/8751/img3189w.jpg)
next pop the rubbers off and remove the backbox
![[Image: img3190t.jpg]](http://img189.imageshack.us/img189/8923/img3190t.jpg)
![[Image: img3191uc.jpg]](http://img838.imageshack.us/img838/3893/img3191uc.jpg)
i replaced my exhaust gasket you might as well its only a tenner
![[Image: img3192h.jpg]](http://img545.imageshack.us/img545/7136/img3192h.jpg)
i also copperslipped my exhaust bolts..and sprayed the exhaust hangers with silicon spray helps slip on to the rubbers
![[Image: img3193h.jpg]](http://img703.imageshack.us/img703/2625/img3193h.jpg)
now refit
the end result
![[Image: img3194ow.jpg]](http://img824.imageshack.us/img824/2702/img3194ow.jpg)
![[Image: img3195y.jpg]](http://img101.imageshack.us/img101/673/img3195y.jpg)
![[Image: img3196e.jpg]](http://img8.imageshack.us/img8/1313/img3196e.jpg)
would like to thank rabs for the exhaust it looks and sounds amazing
ps action shots are for stav...:kiltsmilie:
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
1)spray the exhaust bolts with the likes of wd40 and to help remove the rubbers(exhaust hangers)spray the rubbers with silicon spray..it softens the rubber and helps them slide off the exhaust
their is 4 rubbers
next remove the two 14mm bolts with the springs on them..i used a spanner on the 14mm's as you cant get a socket on to the top one
and the hard one...
next pop the rubbers off and remove the backbox
i replaced my exhaust gasket you might as well its only a tenner
i also copperslipped my exhaust bolts..and sprayed the exhaust hangers with silicon spray helps slip on to the rubbers
now refit
the end result
would like to thank rabs for the exhaust it looks and sounds amazing
ps action shots are for stav...:kiltsmilie:
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
15-01-2018, 12:36 PM
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Looking good Ormi. Did you not need to heat any of the bolts to get them off
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
15-01-2018, 01:17 PM
Moley Looking good Ormi. Did you not need to heat any of the bolts to get them off
no mate 14mm spanyard crack and away it came....to be honest ive never had to use heat on any nut or bolt on my car..
its a lovely fit mate it has the clasic slight jap sqint to it slight upwart to the right angle...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Moley Looking good Ormi. Did you not need to heat any of the bolts to get them off
no mate 14mm spanyard crack and away it came....to be honest ive never had to use heat on any nut or bolt on my car..
its a lovely fit mate it has the clasic slight jap sqint to it slight upwart to the right angle...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
15-01-2018, 02:34 PM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
me and stav were talking how good patriks walkthroughs were and how he always manages an action shot...so i thought id give it a bash...
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
16-01-2018, 10:50 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
16-01-2018, 10:50 AM #8Lovely Ormi, love the action shots
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 0
Views 179
Views 179
13-12-2022, 05:57 AM
Last Post byRabster
Last Post by
Replies 11
Views 1,435
Views 1,435
05-02-2022, 09:27 PM
Last Post bySparkystav
Last Post by
Replies 16
Views 917
Views 917
23-01-2022, 08:43 AM
Last Post byJapHappyScott
Last Post by
Replies 1
Views 1,035
Views 1,035
02-02-2021, 11:40 PM
Last Post byMoley
Last Post by
Replies 8
Views 550
Views 550
25-02-2020, 01:37 AM
Last Post byel_bandido
Last Post by
Replies 13
Views 1,244
Views 1,244
30-01-2018, 01:06 PM
Last Post byjay_russell
Last Post by
Replies 0
Views 738
Views 738
10-01-2018, 09:03 AM
Last Post byRabster
Last Post by
Replies 1
Views 754
Views 754
09-05-2016, 08:51 AM
Last Post bysteviewevie
Last Post by