JapCarForum Cars, Cars, Cars! Car Care & Detailing G220 Polisher

G220 Polisher

G220 Polisher

Pages (2): Previous 1 2
Lexusboy
Posting Freak
9,267
24-02-2018, 11:35 PM
#11
Dave when I first bought my g220 I thought what a waste of money.
However I soon found out it had very little to do with the machine but the operator.
It does take a bit of trail and error if you do not do your home work first.

When you have mastered its use your see what a great tool it is, Rabster managed to change his car from baby pink to hurcles red :biggrin:

Down side for you Dave is your be requested to clean all your ladies in your house hold cars once you get the correct finish.
Now that will be more hours spent cleaning than you currently have free hours in the day
Lexusboy
24-02-2018, 11:35 PM #11

Dave when I first bought my g220 I thought what a waste of money.
However I soon found out it had very little to do with the machine but the operator.
It does take a bit of trail and error if you do not do your home work first.

When you have mastered its use your see what a great tool it is, Rabster managed to change his car from baby pink to hurcles red :biggrin:

Down side for you Dave is your be requested to clean all your ladies in your house hold cars once you get the correct finish.
Now that will be more hours spent cleaning than you currently have free hours in the day

dodgydave
Senior Member
472
25-02-2018, 03:52 AM
#12
Thanks for all the advise. I don't think I want to go for a rotary, I don't need something for a lot of paint correction I only want something for minor painte correction (removing minor swirls) and finish polishing. I think i'm leaning towards the DAS-6 for it's price.

@ Lexusboy, I already spend all my time on the ladies cars, I was hoping that having a polisher might actualy save me some time lol.
dodgydave
25-02-2018, 03:52 AM #12

Thanks for all the advise. I don't think I want to go for a rotary, I don't need something for a lot of paint correction I only want something for minor painte correction (removing minor swirls) and finish polishing. I think i'm leaning towards the DAS-6 for it's price.

@ Lexusboy, I already spend all my time on the ladies cars, I was hoping that having a polisher might actualy save me some time lol.

E55EX_RACER
Senior Member
379
25-02-2018, 02:41 PM
#13
Considering you have soft Jap paint I would go with a DA polisher. Don't try and get it done all in one day though, as it will take twice as long as using a rotary. You will get better results just taking your time doing a couple of panels at a time. Also remember to get some IPA and do a wipe down after polishing. This will remove any oils the polish leaves, which can mask the swirls and trick you into thinking it's corrected when it's not.

Post up the results when you've finished Smile

[Image: sig.jpg]
E55EX_RACER
25-02-2018, 02:41 PM #13

Considering you have soft Jap paint I would go with a DA polisher. Don't try and get it done all in one day though, as it will take twice as long as using a rotary. You will get better results just taking your time doing a couple of panels at a time. Also remember to get some IPA and do a wipe down after polishing. This will remove any oils the polish leaves, which can mask the swirls and trick you into thinking it's corrected when it's not.

Post up the results when you've finished Smile


[Image: sig.jpg]

FirebirdPhil
Posting Freak
7,101
26-02-2018, 01:19 AM
#14
E55EX_RACER . Also remember to get some IPA

yea but IPA is best used for having a good drink afterwards - putting a good beer on paint is a little wasteful :thumbup:

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
26-02-2018, 01:19 AM #14

E55EX_RACER . Also remember to get some IPA

yea but IPA is best used for having a good drink afterwards - putting a good beer on paint is a little wasteful :thumbup:


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

mplavery
Posting Freak
906
26-02-2018, 10:43 AM
#15
Hey Dave,

Funny you got this thread up as i have just been looking at a G220

Never used a polish machine before and thinking it would be good to use on Vix 350Z

I also found these vids which seems good for a first timer


http://www.youtube.com/watch?v=zUHRnHsSXZU

http://www.youtube.com/watch?v=fxwlWijdI...ure=relmfu

http://www.youtube.com/watch?v=9objUFdps...ure=relmfu

[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011 Big Grin

BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11

2nd BEST IN SHOW (JAE 2011)

3rd BEST MODIFIED (JAE 2011)


[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
mplavery
26-02-2018, 10:43 AM #15

Hey Dave,

Funny you got this thread up as i have just been looking at a G220

Never used a polish machine before and thinking it would be good to use on Vix 350Z

I also found these vids which seems good for a first timer


http://www.youtube.com/watch?v=zUHRnHsSXZU

http://www.youtube.com/watch?v=fxwlWijdI...ure=relmfu

http://www.youtube.com/watch?v=9objUFdps...ure=relmfu


[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011 Big Grin

BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11

2nd BEST IN SHOW (JAE 2011)

3rd BEST MODIFIED (JAE 2011)


[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851

Pages (2): Previous 1 2
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 10
Views 1,208
30-05-2018, 03:36 AM
Last Post by is300_dino
Replies 20
Views 1,505
27-03-2018, 11:12 AM
Last Post by Lexusboy
Replies 3
Views 789
02-02-2017, 02:26 AM
Last Post by SHAHZ
Replies 20
Views 1,315
02-07-2016, 07:05 AM
Last Post by Andy-R.