My IS300 story so far....
My IS300 story so far....
02-03-2018, 02:39 AM
toxo Let me know when you blow up your gearbox, I've got a spare one sitting around in my workshop :lol:
The internals from a 2JZ-GTE will involve lower compression pistons won't they, so you won't have to do the head gasket.
Good point. TBH I haven't researched any of this stuff extensively yet, so its all just floating around in my gray matter while I sleep at night.
As for the gearbox, that's reassuring to know. Have you pulled it apart at all? Be quite handy to know how hard it is to get to the valvebody springs as those are the parts I need to mod.
toxo Let me know when you blow up your gearbox, I've got a spare one sitting around in my workshop :lol:
The internals from a 2JZ-GTE will involve lower compression pistons won't they, so you won't have to do the head gasket.
Good point. TBH I haven't researched any of this stuff extensively yet, so its all just floating around in my gray matter while I sleep at night.
As for the gearbox, that's reassuring to know. Have you pulled it apart at all? Be quite handy to know how hard it is to get to the valvebody springs as those are the parts I need to mod.
02-03-2018, 02:47 AM
jimxms As for the gearbox, that's reassuring to know. Have you pulled it apart at all? Be quite handy to know how hard it is to get to the valvebody springs as those are the parts I need to mod.
Not done anything with it. I wanted to shift it as a whole, had some bloke on eBay contact me about it so I took it off the car and got it ready and then he disappeared so it's just sat on a dolley in my workshop :Shooting:
They're erm... what's a nice way of putting this... not renowned for coping with power very well!!
jimxms As for the gearbox, that's reassuring to know. Have you pulled it apart at all? Be quite handy to know how hard it is to get to the valvebody springs as those are the parts I need to mod.
Not done anything with it. I wanted to shift it as a whole, had some bloke on eBay contact me about it so I took it off the car and got it ready and then he disappeared so it's just sat on a dolley in my workshop :Shooting:
They're erm... what's a nice way of putting this... not renowned for coping with power very well!!
02-03-2018, 02:52 AM
toxo Not done anything with it. I wanted to shift it as a whole, had some bloke on eBay contact me about it so I took it off the car and got it ready and then he disappeared so it's just sat on a dolley in my workshop :Shooting:
They're erm... what's a nice way of putting this... not renowned for coping with power very well!!
How much was u looking to get for it? VB upgrade, sprag upgrade and a cooler and they're golden for ~400whp I've heard?
Be handy if I could have a spare to build up off the car then just get it bolted on, rather than trying to tell a garage what needs to be done and wait for them to come up with some stupid high £££ estimate.
(what car did you pull it off btw...IS/GS..or?)
Edited 13-04-2011, 12:30 PM by jimxms.
toxo Not done anything with it. I wanted to shift it as a whole, had some bloke on eBay contact me about it so I took it off the car and got it ready and then he disappeared so it's just sat on a dolley in my workshop :Shooting:
They're erm... what's a nice way of putting this... not renowned for coping with power very well!!
How much was u looking to get for it? VB upgrade, sprag upgrade and a cooler and they're golden for ~400whp I've heard?
Be handy if I could have a spare to build up off the car then just get it bolted on, rather than trying to tell a garage what needs to be done and wait for them to come up with some stupid high £££ estimate.
(what car did you pull it off btw...IS/GS..or?)
02-03-2018, 02:59 AM
![[Image: IMGP2245.jpg]](http://theshado.ws/images/LS400/gearbox/IMGP2245.jpg)
Edited 13-04-2011, 12:57 PM by toxo.
It came off a 117,000 mile Y2000 LS400 VVTi. I'm keeping the bellhousing as I need it to adapt the 1UZ engine to a manual box but the rest of it is there. Make me an offer, I want it out of the way! Got the torque converter, propshaft etc lying around as well.
Recently Browsing
13 Guest(s)
13 Guest(s)
Recently Browsing
13 Guest(s)
13 Guest(s)
Related Threads…
Replies 32
Views 2,975
Views 2,975
12-02-2023, 01:41 AM
Last Post byFOSSIL FUELS
Last Post by
Replies 7
Views 752
Views 752
05-12-2018, 01:29 AM
Last Post byIanS200
Last Post by
Replies 41
Views 3,015
Views 3,015
18-12-2017, 08:23 AM
Last Post byDark Samurai
Last Post by