Idle Tick Over
Idle Tick Over
08-07-2016, 09:05 AM
Mine hoovers around the 600 mark since I fitted the induction ages ago, but lately it's become a pain and I need to increase it a tad.
Keith
(remembers the old days of his Capri/Cortina/Mini when a simple screw on the carb was all that needed to be tweaked.....:confused1
Can anyone tell me is there a way that the idle tick over can be increased on the IS200 and if so how/where can this be done?
Mine hoovers around the 600 mark since I fitted the induction ages ago, but lately it's become a pain and I need to increase it a tad.
Keith
(remembers the old days of his Capri/Cortina/Mini when a simple screw on the carb was all that needed to be tweaked.....:confused1
08-07-2016, 09:25 AM
So you think it's idling too low now ? Does it make a difference if the A/C is on or not (since the A/C compressor affects the idling speed) ?
Have you tried resetting the ECU to make it re-learn things and to see if that helps ?
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-07-2016, 09:25 AM #2I don't think you can just alter it like you could in the all days, think it's all under electronic control.
So you think it's idling too low now ? Does it make a difference if the A/C is on or not (since the A/C compressor affects the idling speed) ?
Have you tried resetting the ECU to make it re-learn things and to see if that helps ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
08-07-2016, 09:27 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
08-07-2016, 09:27 AM #3Is it causing any problems?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
08-07-2016, 09:32 AM
steviewevie I don't think you can just alter it like you could in the all days, think it's all under electronic control.
So you think it's idling too low now ? Does it make a difference if the A/C is on or not (since the A/C compressor affects the idling speed) ?
Have you tried resetting the ECU to make it re-learn things and to see if that helps ?
The ECU should correct the idle when the A/C is turned on, it should idle as normal.
As Steviewevie says re-set the ecu and go from there.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
08-07-2016, 09:32 AM #4steviewevie I don't think you can just alter it like you could in the all days, think it's all under electronic control.
So you think it's idling too low now ? Does it make a difference if the A/C is on or not (since the A/C compressor affects the idling speed) ?
Have you tried resetting the ECU to make it re-learn things and to see if that helps ?
The ECU should correct the idle when the A/C is turned on, it should idle as normal.
As Steviewevie says re-set the ecu and go from there.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
08-07-2016, 09:39 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-07-2016, 09:39 AM #6The idle should be corrected but there could (in theory) be a problem with the a/c compressor and/or circuitry that is causing a problem.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
08-07-2016, 09:42 AM
Roadside Tech Is the IS completely FBW throttle?
No its a wired throttle, but assisted by a throttle motor
steviewevie The idle should be corrected but there could (in theory) be a problem with the a/c compressor and/or circuitry that is causing a problem.
why the AC? Cous3 hasnt said what problem its causing yet?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
08-07-2016, 09:42 AM #7Roadside Tech Is the IS completely FBW throttle?
No its a wired throttle, but assisted by a throttle motor
steviewevie The idle should be corrected but there could (in theory) be a problem with the a/c compressor and/or circuitry that is causing a problem.
why the AC? Cous3 hasnt said what problem its causing yet?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
08-07-2016, 09:43 AM
Sparkystav No its a wired throttle, but assisted by a throttle motor
why the AC? Cous3 hasnt said what problem its causing yet?
Just answering 2tongues point about the a/c. The a/c is just one of several possible causes, not saying that's definitely it at all.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-07-2016, 09:43 AM #8Sparkystav No its a wired throttle, but assisted by a throttle motor
why the AC? Cous3 hasnt said what problem its causing yet?
Just answering 2tongues point about the a/c. The a/c is just one of several possible causes, not saying that's definitely it at all.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
08-07-2016, 09:59 AM
In the event of a malfunction the electrical control drops out, and the mechanical throttle cable directly operates the throttle itself.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-07-2016, 09:59 AM #10The accelerator pedal operates a cable which is connected to the throttle body. A sensor there measures the opening on the cable, which feed a signal to the ECU. The ECU then tells the throttle body control motor how much to open the throttle.
In the event of a malfunction the electrical control drops out, and the mechanical throttle cable directly operates the throttle itself.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…