My IS300 story so far....
My IS300 story so far....
19-05-2018, 05:07 AM
We already have the share feature, which posts a thread link to facebook, so maybe it's just something needing enabled?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Chuck a PM @ Rabster or The_Stig, maybe it's an option that can be added easily...
We already have the share feature, which posts a thread link to facebook, so maybe it's just something needing enabled?
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
19-05-2018, 05:31 AM
gonna install my new one in the passenger side headlight where the full beam is, it will match my mod on the driver side with the intake
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
19-05-2018, 05:31 AM #132I had a camera mounted in the front bumper, however being exposed to the elements it soon broke.
gonna install my new one in the passenger side headlight where the full beam is, it will match my mod on the driver side with the intake
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
19-05-2018, 06:39 AM
Sparkystav gonna install my new one in the passenger side headlight where the full beam is, it will match my mod on the driver side with the intake
Still waiting intently for more photos of this Stav!
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Sparkystav gonna install my new one in the passenger side headlight where the full beam is, it will match my mod on the driver side with the intake
Still waiting intently for more photos of this Stav!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:![[Image: 265904_10150224532226491_540486490_79009...6981_o.jpg]](http://i121.photobucket.com/albums/o227/84stoney/265904_10150224532226491_540486490_7900930_4496981_o.jpg)
![[Image: 258164_10150224532106491_540486490_79009...4130_o.jpg]](http://i121.photobucket.com/albums/o227/84stoney/258164_10150224532106491_540486490_7900929_5434130_o.jpg)
19-05-2018, 01:51 PM
Looks to be held on my about a hundred metal tabs?
Can we get info form someone who has done it?
I could send you the whole rad...... and let you figure it out!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:In a word mate..... No!
Looks to be held on my about a hundred metal tabs?
Can we get info form someone who has done it?
I could send you the whole rad...... and let you figure it out!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
19-05-2018, 09:50 PM
Stoney In a word mate..... No!
Looks to be held on my about a hundred metal tabs?
Can we get info form someone who has done it?
I could send you the whole rad...... and let you figure it out!
Ahh that sounds like a right PITA. The only reason I thought that it might have been able to do was because you can buy just the top tank from Toyota.
However, thinking about it, that top tank bit is going to be under a schnitzel load of pressure so its probably not designed to be an easy job.
Is your rad punctured?
Stoney In a word mate..... No!
Looks to be held on my about a hundred metal tabs?
Can we get info form someone who has done it?
I could send you the whole rad...... and let you figure it out!
Ahh that sounds like a right PITA. The only reason I thought that it might have been able to do was because you can buy just the top tank from Toyota.
However, thinking about it, that top tank bit is going to be under a schnitzel load of pressure so its probably not designed to be an easy job.
Is your rad punctured?
19-05-2018, 09:59 PM
All you will find is one rubber seal and access to the fins.
I doubt very much that your be able to re seat it back as it was.
Sorry mate no real short cuts.
Edited 01-07-2011, 07:34 AM by Lexusboy.
19-05-2018, 10:05 PM
Lexusboy Jim it is not advised to open the top or bottom of the clamps on the rads.
All you will find is one rubber seal and access to the fins.
I doubt very much that your be able to re seat it back as it was.
Sorry mate no real short cuts.
Cheers for clearing that up matey. :Sulk:
Luckily though I think I've found a hose connector that I should be able to screw into the snapped off pipe. Its from a spray gun, but has a 5mm diameter threaded male connector on one end and a 1/8" female connector on the other.
With a bit of gentle drilling/tapping I think I should be able to get the 5mm end to screw into the snapped off bit, and then I've got a standard 1/8" connector to put whatever size hose barb on I want.
Then that'll see me good until my Mishimoto radiator and trans cooler arrives
Lexusboy Jim it is not advised to open the top or bottom of the clamps on the rads.
All you will find is one rubber seal and access to the fins.
I doubt very much that your be able to re seat it back as it was.
Sorry mate no real short cuts.
Cheers for clearing that up matey. :Sulk:
Luckily though I think I've found a hose connector that I should be able to screw into the snapped off pipe. Its from a spray gun, but has a 5mm diameter threaded male connector on one end and a 1/8" female connector on the other.
With a bit of gentle drilling/tapping I think I should be able to get the 5mm end to screw into the snapped off bit, and then I've got a standard 1/8" connector to put whatever size hose barb on I want.
Then that'll see me good until my Mishimoto radiator and trans cooler arrives
20-05-2018, 12:11 AM
Lexusboy Jim it is not advised to open the top or bottom of the clamps on the rads.
All you will find is one rubber seal and access to the fins.
I doubt very much that your be able to re seat it back as it was.
Sorry mate no real short cuts.
This may be the case.
Strange Toyota sell the tops though? I would have though any excuse to sell you a more expensive part - And that would be an acceptable excuse!
Yes Jim, the rad is leaking, but it's only quite a small hole, somewhere near the middle, you could probably liquid metal it and use the rad.
If ya fancy giving it a go, either changing tops or patching the hole, the whole rad is yours for postage cost, sub £10 I'd imagine.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Lexusboy Jim it is not advised to open the top or bottom of the clamps on the rads.
All you will find is one rubber seal and access to the fins.
I doubt very much that your be able to re seat it back as it was.
Sorry mate no real short cuts.
This may be the case.
Strange Toyota sell the tops though? I would have though any excuse to sell you a more expensive part - And that would be an acceptable excuse!
Yes Jim, the rad is leaking, but it's only quite a small hole, somewhere near the middle, you could probably liquid metal it and use the rad.
If ya fancy giving it a go, either changing tops or patching the hole, the whole rad is yours for postage cost, sub £10 I'd imagine.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 32
Views 2,981
Views 2,981
12-02-2023, 01:41 AM
Last Post byFOSSIL FUELS
Last Post by
Replies 7
Views 758
Views 758
05-12-2018, 01:29 AM
Last Post byIanS200
Last Post by
Replies 41
Views 3,019
Views 3,019
18-12-2017, 08:23 AM
Last Post byDark Samurai
Last Post by