JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Spacers for Supra TT Calipers on Aero Wheels?

Spacers for Supra TT Calipers on Aero Wheels?

Spacers for Supra TT Calipers on Aero Wheels?

Pages (2): 1 2 Next
sprinter2012
Posting Freak
2,484
12-07-2018, 12:23 PM
#1
I'm expecting it may be Stav that answers this, but does anyone know what/if spacers are required to run Supra TT calipers with Lexus 18" Aero Wheels?

It's 15mm for the stock 17's, but can't find anyone who's done it with Aero's
sprinter2012
12-07-2018, 12:23 PM #1

I'm expecting it may be Stav that answers this, but does anyone know what/if spacers are required to run Supra TT calipers with Lexus 18" Aero Wheels?

It's 15mm for the stock 17's, but can't find anyone who's done it with Aero's

ormi
Posting Freak
3,006
12-07-2018, 12:29 PM
#2
dimis only uses 5mm spacers with these wheels......
[Image: ic1et0.jpg]

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
12-07-2018, 12:29 PM #2

dimis only uses 5mm spacers with these wheels......
[Image: ic1et0.jpg]


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

sprinter2012
Posting Freak
2,484
12-07-2018, 12:38 PM
#3
Aah yes, I only read that a couple of days ago aswell! I can get a cheap pair of spacers for £12 off eBay, so if I do attempt this I may get a set of 10 and 5 and just see which ones fit before getting some decent ones. That way I can test for 5, 10 and 15mm, as I wouldn't have thought my Aero's would be that far off the ones Dimis has :thumbup1:
sprinter2012
12-07-2018, 12:38 PM #3

Aah yes, I only read that a couple of days ago aswell! I can get a cheap pair of spacers for £12 off eBay, so if I do attempt this I may get a set of 10 and 5 and just see which ones fit before getting some decent ones. That way I can test for 5, 10 and 15mm, as I wouldn't have thought my Aero's would be that far off the ones Dimis has :thumbup1:

ormi
Posting Freak
3,006
12-07-2018, 12:42 PM
#4
why not use washers first?ie 1 5mm washer on each stud then fit the wheel no fit put an other 5mm washer on each stud which would be the same as a 10mm spacer if you know what i mean...that'll save you buying a bunch of spacers

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
12-07-2018, 12:42 PM #4

why not use washers first?ie 1 5mm washer on each stud then fit the wheel no fit put an other 5mm washer on each stud which would be the same as a 10mm spacer if you know what i mean...that'll save you buying a bunch of spacers


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

sprinter2012
Posting Freak
2,484
12-07-2018, 12:45 PM
#5
I was thinking that, but whatever I test with would need to be something I could actually drive the car with wouldn't it? Or I could test the caliper for clearance before I plumb it in if that's what you mean?
sprinter2012
12-07-2018, 12:45 PM #5

I was thinking that, but whatever I test with would need to be something I could actually drive the car with wouldn't it? Or I could test the caliper for clearance before I plumb it in if that's what you mean?

ormi
Posting Freak
3,006
12-07-2018, 12:49 PM
#6
no mate you dont need to drive it just put the calipers on then wheels on hand tight and spin them if it doesnt touch job done it wont touch with the spacer...
Edited 23-08-2011, 10:28 PM by ormi.

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
12-07-2018, 12:49 PM #6

no mate you dont need to drive it just put the calipers on then wheels on hand tight and spin them if it doesnt touch job done it wont touch with the spacer...


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

sprinter2012
Posting Freak
2,484
12-07-2018, 12:53 PM
#7
Sorry I meant if I'd got all the way to the end of fitting them, and then tested, I wouldn't be able to drive the car anywhere with just washer behind the wheel. But I can just do a 'dry fit' of the caliper using washers without doing all the brake lines I think is what you were getting at?

Definitely a good idea though, washers are much cheaper than spacers :thumbup:
Edited 23-08-2011, 10:28 PM by sprinter2012.
sprinter2012
12-07-2018, 12:53 PM #7

Sorry I meant if I'd got all the way to the end of fitting them, and then tested, I wouldn't be able to drive the car anywhere with just washer behind the wheel. But I can just do a 'dry fit' of the caliper using washers without doing all the brake lines I think is what you were getting at?

Definitely a good idea though, washers are much cheaper than spacers :thumbup:

ormi
Posting Freak
3,006
12-07-2018, 12:55 PM
#8
sorry mate yes thats what i ment...

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
12-07-2018, 12:55 PM #8

sorry mate yes thats what i ment...


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Sparkystav
Administrator
14,683
12-07-2018, 01:33 PM
#9
i run 15mm spacers with the 18" i have but their 8inch et50 offset

OutlawJapClub Admin Team
Sparkystav
12-07-2018, 01:33 PM #9

i run 15mm spacers with the 18" i have but their 8inch et50 offset


OutlawJapClub Admin Team

dimis
Posting Freak
3,795
19-07-2018, 05:14 AM
#10
Hi, I used 5mm spacer because my rims have an offset et35, check the offset of your rims before you get the spacers. I think they are et50 so you need more clearance 5mm will not be enough

LEXUS IS200 - The most fun car to go sideways
dimis
19-07-2018, 05:14 AM #10

Hi, I used 5mm spacer because my rims have an offset et35, check the offset of your rims before you get the spacers. I think they are et50 so you need more clearance 5mm will not be enough


LEXUS IS200 - The most fun car to go sideways

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 180
28-08-2020, 07:39 AM
Last Post by el_bandido
Replies 6
Views 263
11-03-2020, 08:35 AM
Last Post by Chris0121
Replies 18
Views 587
28-01-2020, 01:40 AM
Last Post by Sparkystav
Replies 0
Views 48
03-12-2019, 06:48 AM
Last Post by jasons
Replies 15
Views 667
22-09-2019, 12:11 PM
Last Post by paddywak
Replies 31
Views 1,994
24-07-2019, 02:42 PM
Last Post by sprinter2012
Replies 5
Views 488
07-05-2019, 12:57 AM
Last Post by ISCal
Replies 4
Views 454
06-03-2019, 03:26 AM
Last Post by JonPowellDJ
Replies 1
Views 287
03-01-2019, 12:47 PM
Last Post by Bandit