Need help on IS200 induction kit!!
Need help on IS200 induction kit!!
Last week i got sent a Greddy Trust induction kit bought for my IS200 2.0 1G-FE instructions in japenese - ok fine seems straight forward but its got couple of wires in the fitting kit a white and brown for the MAF sensor, does this mean the MAF sensor wire need extending ? i read up on induction kits for the IS200 weather its custom or off the shelf but i dont remember anyone mentioning needing to extend the MAF or any other wires ?? anyone help/or fitted a Greddy intake ? cheers
Hi
Last week i got sent a Greddy Trust induction kit bought for my IS200 2.0 1G-FE instructions in japenese - ok fine seems straight forward but its got couple of wires in the fitting kit a white and brown for the MAF sensor, does this mean the MAF sensor wire need extending ? i read up on induction kits for the IS200 weather its custom or off the shelf but i dont remember anyone mentioning needing to extend the MAF or any other wires ?? anyone help/or fitted a Greddy intake ? cheers
Please take some detailed pics and post on here.
J
FunkMasterJay
16-08-2018, 11:51 AM #2the 1G uses a MAP sensor dude.
Please take some detailed pics and post on here.
J
And I would say almost certainly that the wires are to extend the sensor so it reaches it's new position in the induction kit.
My DIY induction kit thread mentions having to extend the IAT wires.
sprinter2012
16-08-2018, 11:51 AM #3Not really important for the fitting process, but its an IAT (Inlet Air Temperature) not a MAF sensor.
And I would say almost certainly that the wires are to extend the sensor so it reaches it's new position in the induction kit.
My DIY induction kit thread mentions having to extend the IAT wires.
Heres a pic of the wires im on about i circled, this picture i found somehwere from the net as i havent even opened the bonnet of my car yet or even driven it this week let alone trying to fit it, lol but i circled the bits im talking about
![[Image: 11111111111111111_G_001.jpg]](http://www.lexusownersclub.com/gallery/albums/Euro/11111111111111111_G_001.jpg)
Thanks, er ok the IS200 dont use a MAF as i originally thought it was,
Heres a pic of the wires im on about i circled, this picture i found somehwere from the net as i havent even opened the bonnet of my car yet or even driven it this week let alone trying to fit it, lol but i circled the bits im talking about
sprinter2012
16-08-2018, 01:15 PM #5There should only be one sensor wired into the original airbox (the one circled on the right) which is the one you need to extend. The tube on the left hand side is more than likely so you can attach the crank case breather to it.
sprinter2012 There should only be one sensor wired into the original airbox (the one circled on the right) which is the one you need to extend. The tube on the left hand side is more than likely so you can attach the crank case breather to it.
I'm with Sprinter. (We're not in a Civil Partnership or anything, or even dating, I just mean that I agree with him!) The air intake temp sensor that was mounted in your airbox will need extending and inserting into the induction kit pipe somewhere along the way. I recently extended mine (OK, Ormi extended mine!) when I was fitting my supercharger, which includes an induction kit. Mine had to be extended by quite a lot, but yours may only need a couple of inches, depending on where about on the induction kit it mounts. The other section marked in the photo looks to be for the crank case breather.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:sprinter2012 There should only be one sensor wired into the original airbox (the one circled on the right) which is the one you need to extend. The tube on the left hand side is more than likely so you can attach the crank case breather to it.
I'm with Sprinter. (We're not in a Civil Partnership or anything, or even dating, I just mean that I agree with him!) The air intake temp sensor that was mounted in your airbox will need extending and inserting into the induction kit pipe somewhere along the way. I recently extended mine (OK, Ormi extended mine!) when I was fitting my supercharger, which includes an induction kit. Mine had to be extended by quite a lot, but yours may only need a couple of inches, depending on where about on the induction kit it mounts. The other section marked in the photo looks to be for the crank case breather.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
Bandit If its the same kit as in the pic mate, the wire should reach without extending it? they were made so you didn't need to modify any parts? :thumbup1:
It does look very close to the factory position, doesn't it!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Bandit If its the same kit as in the pic mate, the wire should reach without extending it? they were made so you didn't need to modify any parts? :thumbup1:
It does look very close to the factory position, doesn't it!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
It may do if you strip back about 5 inches of the heat shrink/insulation tape on the existing loom. But it was easier to just add the wires rather than mess about with the rest of the loom.
Stoney I'm with Sprinter. (We're not in a Civil Partnership or anything, or even dating, I just mean that I agree with him!)
:lol::lol:
sprinter2012
17-08-2018, 04:49 AM #9My induction kit has the sensor mounted in the 90* bend and it still doesn't reach.
It may do if you strip back about 5 inches of the heat shrink/insulation tape on the existing loom. But it was easier to just add the wires rather than mess about with the rest of the loom.
Stoney I'm with Sprinter. (We're not in a Civil Partnership or anything, or even dating, I just mean that I agree with him!)
:lol::lol:
sprinter2012 My induction kit has the sensor mounted in the 90* bend and it still doesn't reach.
speedfreek
17-08-2018, 05:01 AM #10Same here, funny that :laugh:
sprinter2012 My induction kit has the sensor mounted in the 90* bend and it still doesn't reach.
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
1 Guest(s)
1 Guest(s)
Views 470
Last Post by
Views 702
Last Post by
Views 1,199
Last Post by
Views 305
Last Post by
Views 1,168
Last Post by
Views 352
Last Post by
Views 461
Last Post by
Views 488
Last Post by
Views 7,724
Last Post by