JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Speed Signal on manual IS200

Speed Signal on manual IS200

Speed Signal on manual IS200

Sam B
Member
186
20-10-2018, 01:56 PM
#1
anyone know the ecu pinout for the speed signal? ive heard its white with a blue stripe but want to be sure. Any info or input is appreciated.

basicly want to connect my Vehicle speed sensor on the gearbox up too the speed signal that travels to the clocks to get a MPH reading.

[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces
Sam B
20-10-2018, 01:56 PM #1

anyone know the ecu pinout for the speed signal? ive heard its white with a blue stripe but want to be sure. Any info or input is appreciated.

basicly want to connect my Vehicle speed sensor on the gearbox up too the speed signal that travels to the clocks to get a MPH reading.


[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces

Sam B
Member
186
20-10-2018, 01:58 PM
#2
would be spot on if someone who has a IS200 manual around 99' jacked up too tell me the colours of the wires on the sensor to the rear of the box.

[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces
Sam B
20-10-2018, 01:58 PM #2

would be spot on if someone who has a IS200 manual around 99' jacked up too tell me the colours of the wires on the sensor to the rear of the box.


[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces

Sparkystav
Administrator
14,683
20-10-2018, 02:46 PM
#3
Sam,

use the bahamut cars website for the pinouts.

though the ecu signal is fed from the speedo.

its goes from the sensor, to the speedo, then out a different wire to the ECU.

looking at the diagrams the sensor gets and ignition live to its pin 1 (red/blue)
the pin2 is red and is the earth,
pin 3 is the signal and is red/yellow.

the wire out is white/blue as you say from pin 13 to ecu 2nd plug back pin 28.

OutlawJapClub Admin Team
Sparkystav
20-10-2018, 02:46 PM #3

Sam,

use the bahamut cars website for the pinouts.

though the ecu signal is fed from the speedo.

its goes from the sensor, to the speedo, then out a different wire to the ECU.

looking at the diagrams the sensor gets and ignition live to its pin 1 (red/blue)
the pin2 is red and is the earth,
pin 3 is the signal and is red/yellow.

the wire out is white/blue as you say from pin 13 to ecu 2nd plug back pin 28.


OutlawJapClub Admin Team

Sam B
Member
186
22-10-2018, 07:19 AM
#4
Thanks for your help stav, got it working today. Checked the circuit and red was live and red/blue was ground. Signal wire was spot on. Thanks again

[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces
Sam B
22-10-2018, 07:19 AM #4

Thanks for your help stav, got it working today. Checked the circuit and red was live and red/blue was ground. Signal wire was spot on. Thanks again


[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces

Sparkystav
Administrator
14,683
22-10-2018, 08:46 AM
#5
Hmm that doesnt seem right have a look here:

http://bahamutcars.free.fr/workshop/IS_9...ml?code=cm

but hey ho if it works

OutlawJapClub Admin Team
Sparkystav
22-10-2018, 08:46 AM #5

Hmm that doesnt seem right have a look here:

http://bahamutcars.free.fr/workshop/IS_9...ml?code=cm

but hey ho if it works


OutlawJapClub Admin Team

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 4
Views 332
13-12-2023, 02:06 PM
Last Post by Moley
Replies 3
Views 471
09-11-2023, 03:46 AM
Last Post by Dinho
Replies 17
Views 707
06-11-2022, 01:49 AM
Last Post by Rabster
Replies 4
Views 1,218
02-11-2022, 10:55 AM
Last Post by Sparkystav
Replies 2
Views 306
06-08-2022, 11:58 AM
Last Post by Brad92
Replies 38
Views 1,179
23-02-2022, 01:20 PM
Last Post by beamstezza
Replies 2
Views 354
18-10-2021, 02:04 AM
Last Post by Rabster
Replies 7
Views 463
03-09-2021, 11:04 AM
Last Post by FOSSIL FUELS
Replies 1
Views 490
29-08-2021, 09:59 AM
Last Post by Sparkystav
Replies 35
Views 7,725
04-08-2021, 04:34 AM
Last Post by cjoseph