Speed Signal on manual IS200
Speed Signal on manual IS200
anyone know the ecu pinout for the speed signal? ive heard its white with a blue stripe but want to be sure. Any info or input is appreciated.
basicly want to connect my Vehicle speed sensor on the gearbox up too the speed signal that travels to the clocks to get a MPH reading.
Sam,
use the bahamut cars website for the pinouts.
though the ecu signal is fed from the speedo.
its goes from the sensor, to the speedo, then out a different wire to the ECU.
looking at the diagrams the sensor gets and ignition live to its pin 1 (red/blue)
the pin2 is red and is the earth,
pin 3 is the signal and is red/yellow.
the wire out is white/blue as you say from pin 13 to ecu 2nd plug back pin 28.
Hmm that doesnt seem right have a look here:
http://bahamutcars.free.fr/workshop/IS_9...ml?code=cm
but hey ho if it works