coilover fitting
coilover fitting
26-10-2018, 06:48 AM
Stoney I will fit mine soon too (Teins) and will be going fore about 30mm up front and 40mm rear. This is what I ran before, the car sits well, yet speed bumps and other uneven ground (like the entrance to my drive!) shouldn't be a problem. You may want to give that a try. Fitment shouldn't be too difficult, I am gonna give mine a go myself.
30mm front, 40mm rear:
![[Image: 16122007134.jpg]](http://i121.photobucket.com/albums/o227/84stoney/16122007134.jpg)
What kind of Teins you got to fit mate ?
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Stoney I will fit mine soon too (Teins) and will be going fore about 30mm up front and 40mm rear. This is what I ran before, the car sits well, yet speed bumps and other uneven ground (like the entrance to my drive!) shouldn't be a problem. You may want to give that a try. Fitment shouldn't be too difficult, I am gonna give mine a go myself.
30mm front, 40mm rear:
What kind of Teins you got to fit mate ?
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
27-10-2018, 01:38 AM
Lexuspat that sits so nice ^^^^^^^
Yeah, I always wanted to take it lower too, but given the places I have to drive I need to retain some clearance, and I did like it as it was. The point I was making is that I think you need to drop 10mm more on the rear to get it to sit flat like that.
Moley What kind of Teins you got to fit mate ?
I think they are Flex... though it's been a few years! Not removed from my old car yet though, and may need a clean up/refurb, depending upon their condition. I was going to fit them with my new rims a couple months back, but now I think I need wider rear tyres, and also will need arch rolling (which nobody does near me!) It all got a bit complicated and what with me having a broken hand too, I'm gonna leave the car as it until the new year now.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Lexuspat that sits so nice ^^^^^^^
Yeah, I always wanted to take it lower too, but given the places I have to drive I need to retain some clearance, and I did like it as it was. The point I was making is that I think you need to drop 10mm more on the rear to get it to sit flat like that.
Moley What kind of Teins you got to fit mate ?
I think they are Flex... though it's been a few years! Not removed from my old car yet though, and may need a clean up/refurb, depending upon their condition. I was going to fit them with my new rims a couple months back, but now I think I need wider rear tyres, and also will need arch rolling (which nobody does near me!) It all got a bit complicated and what with me having a broken hand too, I'm gonna leave the car as it until the new year now.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
27-10-2018, 10:17 AM
Marsdendean I was going to go for the Mesiter ones until i was looking around the £900 mark for the coilovers and fitting . . . . So if anyone posts a guide to fitting then i will have some in the new year
what?!
Cost me £586 or something like that. Fitting is going to cost you over £300?!
el_bandido
27-10-2018, 10:17 AM #14Marsdendean I was going to go for the Mesiter ones until i was looking around the £900 mark for the coilovers and fitting . . . . So if anyone posts a guide to fitting then i will have some in the new year
what?!
Cost me £586 or something like that. Fitting is going to cost you over £300?!
27-10-2018, 10:25 AM
el_bandido what?!
Cost me £586 or something like that. Fitting is going to cost you over £300?!
Fitting (assuming it take a couple of hours) plus a full geometry setup is just under £300 at WIM
sprinter2012
27-10-2018, 10:25 AM #15el_bandido what?!
Cost me £586 or something like that. Fitting is going to cost you over £300?!
Fitting (assuming it take a couple of hours) plus a full geometry setup is just under £300 at WIM
27-10-2018, 10:33 AM
el_bandido
27-10-2018, 10:33 AM #16Christ. How much is it just for the geo? I am planning on getting that sorted when they have bedded in.
27-10-2018, 10:53 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
27-10-2018, 10:53 AM #17WIM charged me £100 for geo on an IS200, last time I was there.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
27-10-2018, 11:17 AM
jay_russell
27-10-2018, 11:17 AM #18just how long does it take to bed them in? i'm going to do my geo to set the ride hieght on them but will i need to do it agian after?
27-10-2018, 12:15 PM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
27-10-2018, 12:15 PM #19a couple hundred miles usually? Give MrR a shout they will confirm it for you, it is well worth getting the WIM settings if you haven't got them already.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
27-10-2018, 01:39 PM
jay_russell
27-10-2018, 01:39 PM #20got them saved om my wim machine at work, personal settings just for my car. even have fixed the basic is200 settings so that all others done there have the right settings
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 10
Views 396
Views 396
04-07-2020, 02:03 PM
Last Post bymattlaw
Last Post by
Replies 7
Views 331
Views 331
03-06-2020, 01:37 PM
Last Post byStoney
Last Post by
Replies 16
Views 1,888
Views 1,888
17-04-2018, 01:37 PM
Last Post byKerja
Last Post by