Front Fog Lights
Front Fog Lights
I know around 2003> they changed to the darker colour and different bulb type. But was that it?
The reason why I ask if i'm about to fit my third set, simply due to the fact that they keep corroding! They get condensation in, water gets in and the bulbs corrodes in the back of the unit. Very frustrating and very expensive!!
My question is, is there meant to be some sort of protection like a rubber water proof cover on the backs? Did Lexus modify the later spec fog lights?
And is it only the darker ones that take the different bulbs?
Cheers
I was just wondering if anyone can tell me if there are any differences in the types of front fog lights used on the IS200?
I know around 2003> they changed to the darker colour and different bulb type. But was that it?
The reason why I ask if i'm about to fit my third set, simply due to the fact that they keep corroding! They get condensation in, water gets in and the bulbs corrodes in the back of the unit. Very frustrating and very expensive!!
My question is, is there meant to be some sort of protection like a rubber water proof cover on the backs? Did Lexus modify the later spec fog lights?
And is it only the darker ones that take the different bulbs?
Cheers
Dark Samurai
25-11-2018, 02:20 PM #2All is300s do have a yellow film behind the projector to make the bulb yellow Gord
the newer ones ran h3's
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
they did change the bulbs older ones used hb4 then they changed them
the newer ones ran h3's
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
myself i would make a short loom so i didnt need to butcher the standard loom
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
mate theirs only two wires and you cant even muck them up
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
The ones I have (post 03) have a H3 style bulb, with a plastic cap and a rubber seal over the back so the whole thing is water proof.
sprinter2012
25-11-2018, 03:26 PM #9Common fault, water gets into the earlier style ones. Plus salt water isn't good for aluminium anyway.
The ones I have (post 03) have a H3 style bulb, with a plastic cap and a rubber seal over the back so the whole thing is water proof.
Would this be a viable option to solve the IS200's fogs misting up?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
27-11-2018, 02:10 AM #10Correct me if I am wrong, I think Landrovers have a breather hole + rubber tube on the top of their fog lights do they not? This would allow the water that does get in through the seals to escape in the form of steam through the rubber hose as the lamp heats up the unwanted water???
Would this be a viable option to solve the IS200's fogs misting up?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
3 Guest(s)
3 Guest(s)
Views 159
Last Post by
Views 178
Last Post by
Views 310
Last Post by
Views 543
Last Post by
Views 765
Last Post by
Views 718
Last Post by
Views 338
Last Post by
Views 1,638
Last Post by