JapCarForum Cars, Cars, Cars! Project Cars Cyntax's 323f Sport

Cyntax's 323f Sport

Cyntax's 323f Sport

Pages (2): 1 2 Next
Cyntax
Junior Member
30
21-02-2019, 03:10 AM
#1
Copied from the welcome thread, but its a start!

My wolf in sheep's clothing; 323f 2.0 Sport.

The engine is a stock 2.0 DOHC N/A lump, pushing around 140bhp.

Lots of things have been done to these engines, including retro fitting the mazdaspeed turbo kit. Any more than 8psi on these will blow the internals, so without going forged, I doubt I'll ever get over 220bhp on a daily runner.

For now, I'm just looking to have a nice clean (stealthy) car, that is reliable.
The paintwork is a bit shoddy, with stone chips everywhere! As long as I can find a suitable daily to use on the cheap, she'll have a respray before JAE this year Big Grin

Current mods include:

6000k HIDs
LED side lights
Removed number plate surround
Custom number plates
MazdaSpeed front spleeeeter
Painted headlights bezels
MX5 alloy wheels
Painted calipers
Air diversion panel (under bonnet)
Billet oil cap
Raised Mazda badge on the rocker cover
Removed air ducting (for nice induction noise!)
Clear side repeaters, with silver bulbs
Mist washer jets
Short shift kit
Custom made stainless gear knob (no polishing needed!)
Painted interior panels
Brushed dial surrounds
Mazda boot lip protector
Aero rear wiper arm
Bee sting aerial
Custom made sub box, with 2 x 200w Kenwood 6x9 subs and a 200w Kenwood slimline amp
Pioneer single dinn head unit
Flip Key

There is probably more, I just can't remember!

And on to the good stuff!
[Image: IMG_9297.jpg]
[Image: IMG_9302.jpg]
[Image: IMG_9149.jpg]
[Image: IMG_9151.jpg]
[Image: 8879d673.jpg]
[Image: 28b52c88.jpg]
[Image: eabf3aac.jpg]
[Image: 5a0020dd-1.jpg]
[Image: f8817b45-1.jpg]

And this is what it looked like stock:
[Image: IMG_0191800x600.jpg]

Up coming mods (for this year I hope) include:
Custom rear valance for a second zorst
Custom stainless exhaust system (cat-back)
Stainless exhaust header
40mm drop all round (spax)
40% tints in the rear
Double dinn head unit
Induction kit
JDM power fold mirrors (if I can figure out the wiring for the **** things!)
Cyntax
21-02-2019, 03:10 AM #1

Copied from the welcome thread, but its a start!

My wolf in sheep's clothing; 323f 2.0 Sport.

The engine is a stock 2.0 DOHC N/A lump, pushing around 140bhp.

Lots of things have been done to these engines, including retro fitting the mazdaspeed turbo kit. Any more than 8psi on these will blow the internals, so without going forged, I doubt I'll ever get over 220bhp on a daily runner.

For now, I'm just looking to have a nice clean (stealthy) car, that is reliable.
The paintwork is a bit shoddy, with stone chips everywhere! As long as I can find a suitable daily to use on the cheap, she'll have a respray before JAE this year Big Grin

Current mods include:

6000k HIDs
LED side lights
Removed number plate surround
Custom number plates
MazdaSpeed front spleeeeter
Painted headlights bezels
MX5 alloy wheels
Painted calipers
Air diversion panel (under bonnet)
Billet oil cap
Raised Mazda badge on the rocker cover
Removed air ducting (for nice induction noise!)
Clear side repeaters, with silver bulbs
Mist washer jets
Short shift kit
Custom made stainless gear knob (no polishing needed!)
Painted interior panels
Brushed dial surrounds
Mazda boot lip protector
Aero rear wiper arm
Bee sting aerial
Custom made sub box, with 2 x 200w Kenwood 6x9 subs and a 200w Kenwood slimline amp
Pioneer single dinn head unit
Flip Key

There is probably more, I just can't remember!

And on to the good stuff!
[Image: IMG_9297.jpg]
[Image: IMG_9302.jpg]
[Image: IMG_9149.jpg]
[Image: IMG_9151.jpg]
[Image: 8879d673.jpg]
[Image: 28b52c88.jpg]
[Image: eabf3aac.jpg]
[Image: 5a0020dd-1.jpg]
[Image: f8817b45-1.jpg]

And this is what it looked like stock:
[Image: IMG_0191800x600.jpg]

Up coming mods (for this year I hope) include:
Custom rear valance for a second zorst
Custom stainless exhaust system (cat-back)
Stainless exhaust header
40mm drop all round (spax)
40% tints in the rear
Double dinn head unit
Induction kit
JDM power fold mirrors (if I can figure out the wiring for the **** things!)

N15_GTi
Senior Member
268
21-02-2019, 03:15 AM
#2
Looks nice and tidy mate!
N15_GTi
21-02-2019, 03:15 AM #2

Looks nice and tidy mate!

Lerch
Member
172
21-02-2019, 03:39 AM
#3
looking sexy as usual mate, you coming Japfest?
Lerch
21-02-2019, 03:39 AM #3

looking sexy as usual mate, you coming Japfest?

eogbaker
Member
148
21-02-2019, 01:00 PM
#4
wow is this our little hide out lol
eogbaker
21-02-2019, 01:00 PM #4

wow is this our little hide out lol

Cyntax
Junior Member
30
21-02-2019, 01:07 PM
#5
Shhhh!
Cyntax
21-02-2019, 01:07 PM #5

Shhhh!

Cyntax
Junior Member
30
26-02-2019, 04:16 AM
#6
Right; after I've got the replacement bumper, and modified valance painted and fitted, I'm going to have a bash at refurbing my wheels, as the lacquer is bubbling, and there are some curb marks Sad

I fancy changing the colour a bit, but not sure what to. Here it is at the moment;

[Image: IMG_9298.jpg]


I was thinking either matt bronze, or a dark (ish) graphite.

What do you guys think?
Cyntax
26-02-2019, 04:16 AM #6

Right; after I've got the replacement bumper, and modified valance painted and fitted, I'm going to have a bash at refurbing my wheels, as the lacquer is bubbling, and there are some curb marks Sad

I fancy changing the colour a bit, but not sure what to. Here it is at the moment;

[Image: IMG_9298.jpg]


I was thinking either matt bronze, or a dark (ish) graphite.

What do you guys think?

Lexuspat
Administrator
6,827
26-02-2019, 05:15 AM
#7
its a tough choice i would get somewone whos good on photoshop to change the colour then you could see which looks better

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
26-02-2019, 05:15 AM #7

its a tough choice i would get somewone whos good on photoshop to change the colour then you could see which looks better


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Lerch
Member
172
26-02-2019, 05:27 AM
#8
we all know you like pink dude Tongue
Lerch
26-02-2019, 05:27 AM #8

we all know you like pink dude Tongue

Cyntax
Junior Member
30
26-02-2019, 07:35 AM
#9
Easy tiger!
I may give the old PS a run later to get some examples. It will need lowering befor though Wink
Cyntax
26-02-2019, 07:35 AM #9

Easy tiger!
I may give the old PS a run later to get some examples. It will need lowering befor though Wink

Cyntax
Junior Member
30
27-02-2019, 08:29 AM
#10
Nice little arty shot for you;

[Image: carpark.jpg]

Quality isn't great as it was done on my iPhone, but hey!
Cyntax
27-02-2019, 08:29 AM #10

Nice little arty shot for you;

[Image: carpark.jpg]

Quality isn't great as it was done on my iPhone, but hey!

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 83
Views 4,284
06-05-2023, 06:32 AM
Last Post by Niliano
Replies 54
Views 6,399
05-05-2023, 01:09 PM
Last Post by Sparkystav
Replies 2
Views 502
16-03-2023, 11:26 AM
Last Post by Lexuspat
Replies 10
Views 1,357
07-02-2023, 08:29 AM
Last Post by dimis
Replies 69
Views 12,925
25-11-2022, 04:48 AM
Last Post by Rabster
Replies 38
Views 3,860
18-06-2022, 08:37 AM
Last Post by Lerch
Replies 12
Views 1,870
21-06-2021, 03:24 PM
Last Post by sprinter2012
Replies 55
Views 6,139
19-06-2021, 12:42 PM
Last Post by JapHappyScott
Replies 19
Views 2,265
18-05-2021, 10:38 AM
Last Post by john wan