Heater control led guide
Heater control led guide
Also found that getting the 3 led strip into the dial housing was a real pita!
So i'm gonna try a different method and try and use these,
![[Image: 216056_10150983091316712_1359223791_n.jpg]](https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc6/216056_10150983091316712_1359223791_n.jpg)
their not in a glass tube so should slide past the bit of plastic that works the switch.
keep you up dated....
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
Well i started mine today, but found that the leds strips i had are not good enough to give a great white light for the buttons, the leds are too far apart so i get a patchy light.
Also found that getting the 3 led strip into the dial housing was a real pita!
So i'm gonna try a different method and try and use these,
their not in a glass tube so should slide past the bit of plastic that works the switch.
keep you up dated....
Anyways i'm not that happy with how it turned out as its not a white as i was hoping!
Plus the god **** clock has stopped working!!!
Moley did you sort yours out?
Fortunately it was a spare that i picked up so still got my orig one to try again, if i ever muster the patience to do it again!
Pic's
![[Image: 202660_10150987608416712_31427512_o.jpg]](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc6/202660_10150987608416712_31427512_o.jpg)
![[Image: 620550_10150987633516712_2089633229_o.jpg]](https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/620550_10150987633516712_2089633229_o.jpg)
![[Image: 327832_10150987607991712_1518345078_o.jpg]](https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/327832_10150987607991712_1518345078_o.jpg)
Ok guys, i did my led dials tonight (what a pain in the fecking ass!)
Anyways i'm not that happy with how it turned out as its not a white as i was hoping!
Plus the god **** clock has stopped working!!!
Moley did you sort yours out?
Fortunately it was a spare that i picked up so still got my orig one to try again, if i ever muster the patience to do it again!
Pic's
Also if it's a different model to your one it may only blow one temp.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
12-07-2019, 09:29 AM #74Has the little brass pin at the back of the control knob fallen out when you took it apart?
Also if it's a different model to your one it may only blow one temp.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
JayJay1374
21-02-2020, 05:21 AM #76has anyone got anymore pictures of doing this? (where to wire the leds to?) or circuit diagrams? thanks
JayJay1374 has anyone got anymore pictures of doing this? (where to wire the leds to?) or circuit diagrams? thanks
I wired then into the switched feed on the harness that plugs into the unit. Just routed all the wires out of the redundant bulb holes. Om if u need anymore info mate
Ross
JayJay1374 has anyone got anymore pictures of doing this? (where to wire the leds to?) or circuit diagrams? thanks
I wired then into the switched feed on the harness that plugs into the unit. Just routed all the wires out of the redundant bulb holes. Om if u need anymore info mate
Ross
4 Guest(s)
4 Guest(s)
Views 452
Last Post by
Views 509
Last Post by