First disc/pad job - whats needed, good parts?
First disc/pad job - whats needed, good parts?
24-09-2019, 01:07 PM
http://www.ebay.co.uk/itm/320861283333?s...1423.l2649
Also being as this is my first ever brake job (and I'm brickin it), what other tools will I need and does anyone have any tips?
Aside from having a squeak from the front when braking I also need some new discs on the car. I'm thinking of going for these instead of emptying the bank account for OEM parts:
http://www.ebay.co.uk/itm/320861283333?s...1423.l2649
Also being as this is my first ever brake job (and I'm brickin it), what other tools will I need and does anyone have any tips?
24-09-2019, 01:21 PM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
24-09-2019, 01:21 PM #2Socket set, small screw driver, big screwdriver or a lever, should be all you need.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
24-09-2019, 01:23 PM
Sparkystav Socket set, small screw driver, big screwdriver or a lever, should be all you need.
How about greases and tools for compressing the pistons? Are those EBC parts OK BTW? Was thinking of Mintex pads with EBC discs otherwise, as there seems to be mixed reviews on the greenstuffs.
Edited 04-11-2012, 11:17 PM by jimxms.
Sparkystav Socket set, small screw driver, big screwdriver or a lever, should be all you need.
How about greases and tools for compressing the pistons? Are those EBC parts OK BTW? Was thinking of Mintex pads with EBC discs otherwise, as there seems to be mixed reviews on the greenstuffs.
24-09-2019, 02:40 PM
As for tools for pushing the pistons back, that's what the levers for.
You will need some copper slip to grease the back of the pads your right.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
24-09-2019, 02:40 PM #4Green stuffs are good but a little dusty I found.
As for tools for pushing the pistons back, that's what the levers for.
You will need some copper slip to grease the back of the pads your right.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
24-09-2019, 10:01 PM
I skipped the greenstuffs in the end and went for mintex. Worked out quite well as I ended up avoiding eBay and going to camskill where I got discs and pads for £150.
Will grab some copper slip too. Do I need anything for the wear sensors?
Ahh right, would a breaker bar do the trick do you think?
I skipped the greenstuffs in the end and went for mintex. Worked out quite well as I ended up avoiding eBay and going to camskill where I got discs and pads for £150.
Will grab some copper slip too. Do I need anything for the wear sensors?
25-09-2019, 12:20 AM
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Jim, give me a shout if you need any help mate, gladly pop over to you
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
25-09-2019, 01:37 AM
Phil01 Jim, give me a shout if you need any help mate, gladly pop over to you
Much appreciated mate
I may well take you up on that as I don't want to fudge up something so serious!O/T I just realised I ordered the wrong discs from camskill (rear rather than front). Fronts were £40 more expensive, but when I called to cancel the order they offered to change the order over for nothing!
Phil01 Jim, give me a shout if you need any help mate, gladly pop over to you
Much appreciated mate
I may well take you up on that as I don't want to fudge up something so serious!O/T I just realised I ordered the wrong discs from camskill (rear rather than front). Fronts were £40 more expensive, but when I called to cancel the order they offered to change the order over for nothing!
25-09-2019, 11:26 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
25-09-2019, 11:26 AM #8Camskill are great like that lol.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 5
Views 963
Views 963
11-04-2022, 07:55 AM
Last Post byDaveEdin
Last Post by
Replies 28
Views 2,276
Views 2,276
24-04-2019, 01:45 AM
Last Post bydalegt4
Last Post by
Replies 4
Views 536
Views 536
24-12-2018, 10:40 AM
Last Post bymatt 'sexus' is200
Last Post by
Replies 0
Views 469
Views 469
26-08-2018, 03:58 AM
Last Post bynickie-b
Last Post by
Replies 5
Views 713
Views 713
17-07-2018, 01:22 PM
Last Post byAaronR33
Last Post by