IS200 Supercharged

JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Supercharging & Turbo Modifications IS200 Supercharged

IS200 Supercharged

Pages (3): 1 2 3 Next

CammyGrieve
Member

134

27-11-2019, 01:26 AM

Hi guys, new to this site, been on Driftworks a while but been told get better advice on here Smile

Anyways i have an IS200 with a TTE Supercharger current spec below

TTE Supercharger
FMIC
HKS BOV
Custom induction kit
Manifold (To be fitted)
Alloy radiator (to be fitted)
Cat back exhause system
Tein coilovers
Rota Grid Drifts 18x10 ... to be fitted soon when get tyres Smile

Looking at doing some more work to the engine for performance, i was speaking to a guy at the weekend has uprated the conrods and engine internals, uprated fuel injectors and a base map he is running 240bhp ... dont even think mine is over 200 with the charger.

Anyone uprated the pulley? And does anybody know where i can get uprated conrods at a decent price?

Here is a pic of how she looks when i first picked it up Smile

[Image: 525111_10151272863332456_1097670671_n.jpg]

CammyGrieve

27-11-2019, 01:26 AM #1

Hi guys, new to this site, been on Driftworks a while but been told get better advice on here Smile

Anyways i have an IS200 with a TTE Supercharger current spec below

TTE Supercharger
FMIC
HKS BOV
Custom induction kit
Manifold (To be fitted)
Alloy radiator (to be fitted)
Cat back exhause system
Tein coilovers
Rota Grid Drifts 18x10 ... to be fitted soon when get tyres Smile

Looking at doing some more work to the engine for performance, i was speaking to a guy at the weekend has uprated the conrods and engine internals, uprated fuel injectors and a base map he is running 240bhp ... dont even think mine is over 200 with the charger.

Anyone uprated the pulley? And does anybody know where i can get uprated conrods at a decent price?

Here is a pic of how she looks when i first picked it up Smile

[Image: 525111_10151272863332456_1097670671_n.jpg]

paddywak
Senior Member

277

27-11-2019, 01:47 AM

Very nice pal but we like :ttiuwp: lol

Edited 07-01-2013, 11:22 AM by paddywak.

paddywak

27-11-2019, 01:47 AM #2

Very nice pal but we like :ttiuwp: lol

is300_dino
Posting Freak

3,556

27-11-2019, 04:48 AM

welcome to ojc

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

is300_dino

27-11-2019, 04:48 AM #3

welcome to ojc

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

el_bandido
Account not Activated

2,757

27-11-2019, 04:51 AM

FYI -1g-gte pistons and rods will fit in the 1gfe, usually the cheapest way of upgrading the pistons, if you can get hold of a set anyway.

el_bandido

27-11-2019, 04:51 AM #4

FYI -1g-gte pistons and rods will fit in the 1gfe, usually the cheapest way of upgrading the pistons, if you can get hold of a set anyway.

Sparkystav
Administrator

14,683

27-11-2019, 04:55 AM

As bandit says you have 2 options if your keeping the standard engine.

Ikengineering rods and pistons. Not cheap but very good upgrade.
Or a set of 1ggte ones fit straight in and are a lot stronger.

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Sparkystav

27-11-2019, 04:55 AM #5

As bandit says you have 2 options if your keeping the standard engine.

Ikengineering rods and pistons. Not cheap but very good upgrade.
Or a set of 1ggte ones fit straight in and are a lot stronger.

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

S
Banned

1,153

27-11-2019, 12:13 PM

Me and Jay are busy uprating the crank pulley to 160MM I could have you one made if you like? that should take the boost from 3psi to 9psi (on paper)

PM Me.

S

27-11-2019, 12:13 PM #6

Me and Jay are busy uprating the crank pulley to 160MM I could have you one made if you like? that should take the boost from 3psi to 9psi (on paper)

PM Me.

Jon
Member

189

27-11-2019, 01:13 PM

I have a pulley from a Merc Sprinter water pump, which is 160mm. I think it may (if re-drilled) fit with the TTE kit.

I've already installed 1JZZ injectors, I'm just sorting out my piggy back ECU and then the pulley will go on.

Jon

27-11-2019, 01:13 PM #7

JayJay1374
Senior Member

492

27-11-2019, 02:08 PM

ive got my bigger 160mm pulley fitted (thanks to stix) you can feel it pulling more but i thing a remap and injectors would help unlock the extra power, you cant map the standard ecu so you would have to get a piggyback. most people use Greddy Emanage

Edited 07-01-2013, 11:49 PM by JayJay1374.

http://www.facebook.com/Sxe10CrewUk
Stickers available!!!, PM me.

JayJay1374

27-11-2019, 02:08 PM #8

http://www.facebook.com/Sxe10CrewUk
Stickers available!!!, PM me.

Jon
Member

189

27-11-2019, 02:12 PM

JayJay1374 ive got my bigger 160mm pulley fitted (thanks to stix) you can feel it pulling more put i thing a remap and injectors would help unlock the extra power, you cant map the standard ecu so you would have to get a piggyback. most people use Greddy Emanage

have you got the 160mm pulley with standard ecu (plus black box) and standard injectors?

Jon

27-11-2019, 02:12 PM #9

JayJay1374 ive got my bigger 160mm pulley fitted (thanks to stix) you can feel it pulling more put i thing a remap and injectors would help unlock the extra power, you cant map the standard ecu so you would have to get a piggyback. most people use Greddy Emanage

have you got the 160mm pulley with standard ecu (plus black box) and standard injectors?