Not a good weekends racing!!!!
Not a good weekends racing!!!!
Burn out was great
![[Image: 683J8268.jpg]](http://i4.photobucket.com/albums/y117/kenmacritchie/683J8268.jpg)
Third way up the track it went wrong
![[Image: DSC_03271.jpg]](http://i4.photobucket.com/albums/y117/kenmacritchie/DSC_03271.jpg)
![[Image: DSC_03281.jpg]](http://i4.photobucket.com/albums/y117/kenmacritchie/DSC_03281.jpg)
![[Image: DSC_03291.jpg]](http://i4.photobucket.com/albums/y117/kenmacritchie/DSC_03291.jpg)
OUCH!!
"Reach out and touch someone....No not there!"
"Constipated mathematicians have to work it out with a pencil!"
We were racing at the European finals last weekend and thought it was going to be a great weekend but oh how wrong we were :mad::cursing:
Burn out was great
Third way up the track it went wrong
OUCH!!
"Reach out and touch someone....No not there!"
"Constipated mathematicians have to work it out with a pencil!"
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ouch was the driver ok???
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
How is the car looking, very bad I guess ? :crying:
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-08-2016, 10:08 PM #4Oh my goodness, what happened Ken ? I do hope the driver was ok and no spectators got hurt either.
How is the car looking, very bad I guess ? :crying:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
hock:What happened was we have had problems with bad tyre shake which some times is so bad Tony has to shut it off because he cant see it's so violent and that can be caused by all manner of things, but we went with the fuel system and changed a few things, this picture was the race before last had a good launch.
![[Image: 12-39-45-O-S-NATS-2009-08-23-2693-V.jpg]](http://i4.photobucket.com/albums/y117/kenmacritchie/12-39-45-O-S-NATS-2009-08-23-2693-V.jpg)
So we left the set up alone but this time it carried the front wheels higher so when he lifted off the car came down hard and broke the front N/S A-Arm causing the front to dip down and the rear O/S tyre to break loose and shot the car in to the wall at about 170 then it ended up on it's side and slid the rest of the way through the gantry with a respectable time of 12.2 seconds :biggrin:
"Reach out and touch someone....No not there!"
"Constipated mathematicians have to work it out with a pencil!"
He was fine not even a bruise or scratch and everyone was OK in the crowd.
What happened was we have had problems with bad tyre shake which some times is so bad Tony has to shut it off because he cant see it's so violent and that can be caused by all manner of things, but we went with the fuel system and changed a few things, this picture was the race before last had a good launch.
So we left the set up alone but this time it carried the front wheels higher so when he lifted off the car came down hard and broke the front N/S A-Arm causing the front to dip down and the rear O/S tyre to break loose and shot the car in to the wall at about 170 then it ended up on it's side and slid the rest of the way through the gantry with a respectable time of 12.2 seconds :biggrin:
"Reach out and touch someone....No not there!"
"Constipated mathematicians have to work it out with a pencil!"
kenmac it ended up on it's side and slid the rest of the way through the gantry with a respectable time of 12.2 seconds :biggrin:Hey, that's not a bad time at all ! Glad everyone was ok though :thumbup:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-08-2016, 01:40 AM #8kenmac it ended up on it's side and slid the rest of the way through the gantry with a respectable time of 12.2 seconds :biggrin:Hey, that's not a bad time at all ! Glad everyone was ok though :thumbup:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
07-08-2016, 01:46 AM #9Glad everyone was ok, looks a nasty crash though
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
2 Guest(s)
2 Guest(s)
Views 523
Last Post by
Views 326
Last Post by
Views 690
Last Post by
Views 253
Last Post by
Views 360
Last Post by