My (slow) progression thread
My (slow) progression thread
First off, I decided my Buddyclub exhaust was just too loud so an opportunity came along for a very good condition Blitz-Nur Spec R system and jumped straight in.
Old Buddyclub at the top and New Blitz-Nur underneath, you can see the difference in quality there!
![[Image: 005-3_zps068991f1.jpg]](http://smg.photobucket.com/user/Azzer16/media/005-3_zps068991f1.jpg.html)
Next up was some shiny new coilovers. After reading around I decided to go with some HSD's from Driftworks, fantastic quality and ride comfort over the D2's i had.
![[Image: 007-3_zpse999924e.jpg]](http://smg.photobucket.com/user/Azzer16/media/007-3_zpse999924e.jpg.html)
And the new drop:
![[Image: 018-1_zpse04cfb9b.jpg]](http://smg.photobucket.com/user/Azzer16/media/018-1_zpse04cfb9b.jpg.html)
As you can see from that I have a hilarious amount of camber on the back wheels so I bought myself some rear adjustable camber arms and fitted those.
![[Image: 032-1_zps136cbd0b.jpg]](http://smg.photobucket.com/user/Azzer16/media/032-1_zps136cbd0b.jpg.html)
![[Image: 034_zpsc22961a7.jpg]](http://smg.photobucket.com/user/Azzer16/media/034_zpsc22961a7.jpg.html)
Next up is a full wheel alignment next week ready for my new wheels to arrive and fit those at the end of next week. Then it'll just be a ruddy good clean and she'll be ready for Japfest!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
Not updated this for a little while. Got a few changes happened over the past few weeks all in aid of getting the car ready for the shows and meets over the summer.
First off, I decided my Buddyclub exhaust was just too loud so an opportunity came along for a very good condition Blitz-Nur Spec R system and jumped straight in.
Old Buddyclub at the top and New Blitz-Nur underneath, you can see the difference in quality there!
Next up was some shiny new coilovers. After reading around I decided to go with some HSD's from Driftworks, fantastic quality and ride comfort over the D2's i had.
And the new drop:
As you can see from that I have a hilarious amount of camber on the back wheels so I bought myself some rear adjustable camber arms and fitted those.
Next up is a full wheel alignment next week ready for my new wheels to arrive and fit those at the end of next week. Then it'll just be a ruddy good clean and she'll be ready for Japfest!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
13-03-2020, 11:15 AM #73No wonder that exhaust was loud!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
toxo I had a buddy club spec 2 on my MR2 for a bit... it gave me tinitus!
Yeh I'm pretty sure I have that now too!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
toxo I had a buddy club spec 2 on my MR2 for a bit... it gave me tinitus!
Yeh I'm pretty sure I have that now too!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
A quick test fit before the tyres went on.
![[Image: 062_zps86d19044.jpg]](http://smg.photobucket.com/user/Azzer16/media/062_zps86d19044.jpg.html)
Then once the tyres were all fitted I managed to get them all on and the car cleaned the night before Japfest. Didn't get chance to adjust ride height at this point so not sitting low enough here.
![[Image: 074_zps23bc9554.jpg]](http://smg.photobucket.com/user/Azzer16/media/074_zps23bc9554.jpg.html)
A few shots on the way and back from Japfest.
![[Image: 105_zpsdb22bb98.jpg]](http://smg.photobucket.com/user/Azzer16/media/105_zpsdb22bb98.jpg.html)
![[Image: 107_zpsb70d0a49.jpg]](http://smg.photobucket.com/user/Azzer16/media/107_zpsb70d0a49.jpg.html)
![[Image: 109_zps81723457.jpg]](http://smg.photobucket.com/user/Azzer16/media/109_zps81723457.jpg.html)
Managed to repaint my callipers metallic purple and got some purple locking valve caps too
![[Image: null_zps9c68da3e.jpg]](http://smg.photobucket.com/user/Azzer16/media/null_zps9c68da3e.jpg.html)
And finally, how she's sitting today.
![[Image: thisone_zps75056451.jpg]](http://smg.photobucket.com/user/Azzer16/media/thisone_zps75056451.jpg.html)
She's going for a full laser alignment this week so once that's all done I can tweak the ride height a little more and she'll be spot on!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
So the new wheels are finally on! Some of you have probably seen either at Japfest or via Facebook, but here they are...
A quick test fit before the tyres went on.
Then once the tyres were all fitted I managed to get them all on and the car cleaned the night before Japfest. Didn't get chance to adjust ride height at this point so not sitting low enough here.
A few shots on the way and back from Japfest.
Managed to repaint my callipers metallic purple and got some purple locking valve caps too
And finally, how she's sitting today.
She's going for a full laser alignment this week so once that's all done I can tweak the ride height a little more and she'll be spot on!
Honda Civic Type R EP3 Premier Edition
Mods so far
AEM V2 Induction Kit ¦ Blitz-Nur Spec R Exhaust ¦ Rota Grid Drift 16x8" et10 in Bronze wrapped in Toyo Proxes T1-R's ¦ HSD Coilovers ¦ D2 Rear Adjustable Camber Arms ¦ Mugen Replica Rear Wing ¦ Skunk2 Gear Knob ¦ Sticker-bombed Centre Console ¦ 8000K HID Kit ¦ Metallic Purple Brake Callipers ¦ EP Racing Purple Rear Tow Hook
Progression thread can be found here
4 Guest(s)
4 Guest(s)
Views 5,953
Last Post by
Views 1,926
Last Post by
Views 1,345
Last Post by
Views 44,358
Last Post by
Views 476
Last Post by
Views 2,413
Last Post by
Views 2,344
Last Post by
Views 2,747
Last Post by