Need help with Toad alarm installation
Need help with Toad alarm installation
I was able to acquire a well preserved Toad (C2 - I believe) alarm complete with remote from a mate of mine for free i would like to install this into my 2000 IS200, but i need to know which wires i need to look for can any one help me with either a wiring diagram or a clue as to where i can find the correct wires and the colours of these wires to which i can connect the alarm wires too?
Thanks in advance guys...
Hi All,
I was able to acquire a well preserved Toad (C2 - I believe) alarm complete with remote from a mate of mine for free i would like to install this into my 2000 IS200, but i need to know which wires i need to look for can any one help me with either a wiring diagram or a clue as to where i can find the correct wires and the colours of these wires to which i can connect the alarm wires too?
Thanks in advance guys...
Hope that helps I will try and locate my list of wires tonight
I did help jimbob last year somewhere in his build thread it has the wires for the central locking and what you have to do
Hope that helps I will try and locate my list of wires tonight
12V|white & white/red |+ |ignition harness |
STARTER|black/white |+ |ignition harness |
IGNITION|black/red |+ |ignition harness |
SECOND IGNITION|blue/red |+ |ignition harness |
ACCESSORY|red |+ |ignition harness |
LOCK MOTOR|green/yellow | |body ECU *1 |
UNLOCK MOTOR|blue/black | |body ECU *1 |
DISARM DEFEAT|red/white | |body ECU *1 |
PARKING LIGHTS +|green | |drivers kick panel |
PARKING LIGHTS -|red | |headlight switch |
HEADLIGHTS|red/blue |- |headlight switch |
DOOR TRIGGER|*3 |- |body ECU *1 |
DOME SUPERVISION|use door trigger | | |
TRUNK/HATCH PIN|red/yellow |- |drivers kick panel |
HOOD PIN|blue |- |alarm module *4 |
TRNK/HTCH RELEASE|blue/white |5wi|body ECU *1 |
DISARM NO UNLOCK|black/yellow *7 |- |steering column |
TACHOMETER|black | |igniter *2 |
SPEED SENSE|red/yellow | |abs and traction ECU *5 |
BRAKE WIRE|green/white | + |brake pedal switch |
HORN TRIGGER|green/white |- |steering column |
WIPERS|blu/blk(L),blu/red(H) |+ |steering column |
1 The body ECU is attach to the top of the fusebox.
2 The igniter is on the driver side strut tower.
3 The driver door trigger is red/green, front passenger door is red/black, rear doors is red/white.
4 The alarm module is above the drivers kick panel.
5 The ABS and traction ECU is above the drivers kick panel.
6 The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.
7 This is the ignition key sense wire. Using the status output wire from the remote start to ground this wire will disarm the alarm without unlocking the doors.
Alarm Info
12V|white & white/red |+ |ignition harness |
STARTER|black/white |+ |ignition harness |
IGNITION|black/red |+ |ignition harness |
SECOND IGNITION|blue/red |+ |ignition harness |
ACCESSORY|red |+ |ignition harness |
LOCK MOTOR|green/yellow | |body ECU *1 |
UNLOCK MOTOR|blue/black | |body ECU *1 |
DISARM DEFEAT|red/white | |body ECU *1 |
PARKING LIGHTS +|green | |drivers kick panel |
PARKING LIGHTS -|red | |headlight switch |
HEADLIGHTS|red/blue |- |headlight switch |
DOOR TRIGGER|*3 |- |body ECU *1 |
DOME SUPERVISION|use door trigger | | |
TRUNK/HATCH PIN|red/yellow |- |drivers kick panel |
HOOD PIN|blue |- |alarm module *4 |
TRNK/HTCH RELEASE|blue/white |5wi|body ECU *1 |
DISARM NO UNLOCK|black/yellow *7 |- |steering column |
TACHOMETER|black | |igniter *2 |
SPEED SENSE|red/yellow | |abs and traction ECU *5 |
BRAKE WIRE|green/white | + |brake pedal switch |
HORN TRIGGER|green/white |- |steering column |
WIPERS|blu/blk(L),blu/red(H) |+ |steering column |
1 The body ECU is attach to the top of the fusebox.
2 The igniter is on the driver side strut tower.
3 The driver door trigger is red/green, front passenger door is red/black, rear doors is red/white.
4 The alarm module is above the drivers kick panel.
5 The ABS and traction ECU is above the drivers kick panel.
6 The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.
7 This is the ignition key sense wire. Using the status output wire from the remote start to ground this wire will disarm the alarm without unlocking the doors.
I think i'm gonna try sell on this Toad and use what ever i can make off it having a newer system installed professionally, sorry i wasted your time Rabster, i still appreciated the assist though unless i can get some visual aid i'm to worried i'm gonna mess up my cars wirring and get this all wrong...
I had a root around this weekend trying to figure this lot out and i couldn't make any sense of it, either i was looking at the wrong wires or the colour coding was different...
I think i'm gonna try sell on this Toad and use what ever i can make off it having a newer system installed professionally, sorry i wasted your time Rabster, i still appreciated the assist though unless i can get some visual aid i'm to worried i'm gonna mess up my cars wirring and get this all wrong...
1 Guest(s)
1 Guest(s)
Views 617
Last Post by
Views 634
Last Post by
Views 912
Last Post by
Views 932
Last Post by
Views 1,078
Last Post by
Views 2,286
Last Post by