My Indecisive 4.0 V8 1UZ-FE Project
My Indecisive 4.0 V8 1UZ-FE Project
![[Image: IMG_20130522_143345.jpg]](https://lh4.googleusercontent.com/-7ZCCIX18I_w/UZzJXRx4TvI/AAAAAAAAFUo/ViHTIr6v5f4/w553-h415-no/IMG_20130522_143345.jpg)
![[Image: IMG_20130522_181958.jpg]](https://lh4.googleusercontent.com/-CeN_aZ54RPI/UZ0lfT5rAnI/AAAAAAAAFWM/vwS_lFnE_aw/w311-h415-no/IMG_20130522_181958.jpg)
![[Image: IMG_20130522_182011.jpg]](https://lh5.googleusercontent.com/-IYx8FhaPXsM/UZ0UK63mQYI/AAAAAAAAFVM/ftoxYwOY08A/w311-h415-no/IMG_20130522_182011.jpg)
![[Image: IMG_20130522_182839.jpg]](https://lh3.googleusercontent.com/-mrgDo869kFc/UZ0l6mcFSaI/AAAAAAAAFWc/94LQz5R9haE/w553-h415-no/IMG_20130522_182839.jpg)
![[Image: IMG_20130522_182833.jpg]](https://lh5.googleusercontent.com/-HXOi9JFYWdc/UZ0URPR5VKI/AAAAAAAAFVI/2hYECQrlz_o/w553-h415-no/IMG_20130522_182833.jpg)
![[Image: IMG_20130522_184433.jpg]](https://lh6.googleusercontent.com/-8jx4-4LdLT0/UZ0VIUh79tI/AAAAAAAAFVg/Dp8tz3WoSy0/w553-h415-no/IMG_20130522_184433.jpg)
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
10-04-2020, 02:08 PM #403That's a fair chunk ofmetal that adapter mate!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
The adaptor has to be that thick to accommodate the length of the input shaft so it sits nicely in the crank (in a new spigot bearing included with the kit).
You'd hope so for the amount it cost... as you can probably tell it adapts the auto gearbox bellhousing from the V8 onto the manual gearbox from the Chaser. The bolt pattern on the V8 block is unique and the only thing that bolts to it is the auto bellhousing.
The adaptor has to be that thick to accommodate the length of the input shaft so it sits nicely in the crank (in a new spigot bearing included with the kit).
eogbaker If you have to use the auto housing how are you going to accommodate the clutch slave cylinder and mechanism
By the look of the gearbox adapter it's a concentric clutch with the hydraulic centre clutch release
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
11-04-2020, 08:22 PM #408eogbaker If you have to use the auto housing how are you going to accommodate the clutch slave cylinder and mechanism
By the look of the gearbox adapter it's a concentric clutch with the hydraulic centre clutch release
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Yeah what Stav said. In the first pic you can see the hydraulic release bolted to the middle of the adaptor. It's not fitted in the later photos as I need to cut the sleeve off that goes round the input shaft. Then I'll need to drill a small hole in the bellhousing for two -3 hoses.
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
08-06-2020, 07:51 AM #410looking good mate!
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
12 Guest(s)
12 Guest(s)
Views 661
Last Post by
Views 29,676
Last Post by
Views 89,780
Last Post by