is200 ecu pinouts wanted
is200 ecu pinouts wanted
beamstezza
19-02-2022, 12:20 PM #23That pinout is for altezza and is listed wrong way round. That's what confused me when i was told b28 and could only see d28 you see if you turn E pin to A then D becomes B. Lol
E3 - B28 SPD
E2 - A16 12v
E5 - D17 Ground
beamstezza
19-02-2022, 12:33 PM #27Admin can you edit and delete above posts please my phone went weird.
E3 - B28 SPD
E2 - A16 12v
E5 - D17 Ground
Every thing is wired under the ecu cover but couldnt find the speed signal wire. So i picked the signal at the gearbox speed sensor. I needed to place a wire from the gearbox to the ecu.
But now with all this info i can get the wire from the ecu pin and i can ditch the extra wire i placed. now i can pick the vehicle speed wire from under the ecu cover so its all clean under the cover
No. The only wire i was still looking for is the speed signal wire at the ecu. I have a greddy e manage ultimate piggy back in my car and i needed the vehicle speed signal wire to get my launch control function to work.
Every thing is wired under the ecu cover but couldnt find the speed signal wire. So i picked the signal at the gearbox speed sensor. I needed to place a wire from the gearbox to the ecu.
But now with all this info i can get the wire from the ecu pin and i can ditch the extra wire i placed. now i can pick the vehicle speed wire from under the ecu cover so its all clean under the cover
4 Guest(s)
4 Guest(s)
Views 507
Last Post by
Views 794
Last Post by
Views 2,277
Last Post by
Views 339
Last Post by
Views 382
Last Post by
Views 511
Last Post by
Views 513
Last Post by
Views 7,870
Last Post by
Views 1,338
Last Post by