DIY custom supercharger parts list

JapCarForum Cars, Cars, Cars! Help Topics - Submit Your Help For Other Members! DIY custom supercharger parts list

Pages (21): Previous 1 … 10 11 12 13 14 … 21 Next

P.Lindblom
Posting Freak

821

08-04-2023, 05:46 AM

#111

A few people have asked me to provide them with the drawings for the inlets and outlets. The supercharger inlet is a bit awkward to dimension, since they are ususally made by flattening the pipe and making a matching hole in the flange, but I'll see what I can do.

Here are the other ones:
[Image: eaton_m62_supercharger_outlet_1.jpg]

[Image: eaton_m62_supercharger_outlet_1.jpg]

P.Lindblom

08-04-2023, 05:46 AM #111

Niliano
Member

176

09-04-2023, 12:53 AM

#112

Thought I would post this up:

http://www.ebay.co.uk/itm/Mercedes-Kompr...SwKfVXLbNP

a supercharger for sale at present for a is200 Smile

Niliano

09-04-2023, 12:53 AM #112

Thought I would post this up:

http://www.ebay.co.uk/itm/Mercedes-Kompr...SwKfVXLbNP

a supercharger for sale at present for a is200 Smile

turbo 1
Junior Member

04-07-2023, 09:38 AM

#113

hi i have trying to find a 150mm pulley in your parts list you put nissan nevaro do you have a part number as cant find one on ebay any would be great many thanks

turbo 1

04-07-2023, 09:38 AM #113

hi i have trying to find a 150mm pulley in your parts list you put nissan nevaro do you have a part number as cant find one on ebay any would be great many thanks

Wayne
Senior Member

607

04-07-2023, 10:37 AM

#114

The nissan pulley is 130mm if I remember correctly, not 150mm. As far as I'm aware, you'd need to custom make a 150mm pulley.

Wayne

04-07-2023, 10:37 AM #114

The nissan pulley is 130mm if I remember correctly, not 150mm. As far as I'm aware, you'd need to custom make a 150mm pulley.

turbo 1
Junior Member

04-07-2023, 03:25 PM

#115

Ok thanks for the help

turbo 1

04-07-2023, 03:25 PM #115

Ok thanks for the help

Lexuspat
Administrator

6,827

05-07-2023, 02:08 AM

#116

yeah as above the 150mm pulley would have to be made for it to fit

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team

Lexuspat

05-07-2023, 02:08 AM #116

yeah as above the 150mm pulley would have to be made for it to fit

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team

turbo 1
Junior Member

05-07-2023, 03:36 AM

#117

Hi again has anybody have part number for the 130mm pulley I most of the parts apart from pulley and cradle thanks

turbo 1

05-07-2023, 03:36 AM #117

Hi again has anybody have part number for the 130mm pulley I most of the parts apart from pulley and cradle thanks

Wayne
Senior Member

607

05-07-2023, 03:42 AM

#118

Only part number I have is from the 138mm merc pulley. 6032050110, if its any help. You will need to have the holes redrilled. Pretty sure you need the holes doing on the Nissan pulley, I assume Pat could tell you more.

Sent from my Nexus 7 using Tapatalk

Wayne

05-07-2023, 03:42 AM #118

turbo 1
Junior Member

05-07-2023, 06:17 AM

#119

Thanks I will check that out

turbo 1

05-07-2023, 06:17 AM #119

Thanks I will check that out

Lexuspat
Administrator

6,827

07-07-2023, 12:13 PM

#120

Well just to give a heads up.

1 of the people that used this setup and design had his car dyno tested and the results are......

231.7bhp with the standard pulley.

WOW

sent from Admin HQ via tapatalk

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team