JapCarForum Cars, Cars, Cars! Car Audio/Video/Electronics/Security Tablet Install

Tablet Install

Tablet Install

Pages (4): Previous 1 2 3 4 Next
Wayne
Senior Member
607
29-06-2023, 05:29 AM
#11
I'm tempted by DAB, the only radio station I ever listen to is really poor reception until I'm 5 minutes away from work, but clear as day when I BT it through my fone. For now I'm just gonna stick some toons on to the tab. Gonna pop Maplins later and have a gander at what they have.

The tablet has turned up, already got Torque working on it. Still wanna get my head around what I can do with it before I go and thrash it by sticking that USBROM thingy on it.

It's bigger then I hoped, so it's gonna be a pain in the ass getting it settled nicely into the dash and my electrical skillz are not good enough to find a way to condense it down. oh well, now the fun and the hacking of the dash starts.
Wayne
29-06-2023, 05:29 AM #11

I'm tempted by DAB, the only radio station I ever listen to is really poor reception until I'm 5 minutes away from work, but clear as day when I BT it through my fone. For now I'm just gonna stick some toons on to the tab. Gonna pop Maplins later and have a gander at what they have.

The tablet has turned up, already got Torque working on it. Still wanna get my head around what I can do with it before I go and thrash it by sticking that USBROM thingy on it.

It's bigger then I hoped, so it's gonna be a pain in the ass getting it settled nicely into the dash and my electrical skillz are not good enough to find a way to condense it down. oh well, now the fun and the hacking of the dash starts.

Wayne
Senior Member
607
29-06-2023, 11:50 AM
#12
So from this:
[Image: 1sxhyb.jpg]

To this:

[Image: 2e204kg.jpg]

Needs some filling and sanding in order to look right, but I'm on the right track. Need to work out a way to secure it. Probably gonna have a look at some push clips. I want it secure in the car, but I don't wanna have to rip half the dash out to get to it. Ain't tried any sound or power yet, need to grab a few things and Maplins was awful.

See them marks all over the dash? Whats the best way to get rid of em. I was thinking sand em down and using some filler primer then spraying it black. Anyone got easier ideas?
Edited 09-08-2016, 09:27 PM by Wayne.
Wayne
29-06-2023, 11:50 AM #12

So from this:
[Image: 1sxhyb.jpg]

To this:

[Image: 2e204kg.jpg]

Needs some filling and sanding in order to look right, but I'm on the right track. Need to work out a way to secure it. Probably gonna have a look at some push clips. I want it secure in the car, but I don't wanna have to rip half the dash out to get to it. Ain't tried any sound or power yet, need to grab a few things and Maplins was awful.

See them marks all over the dash? Whats the best way to get rid of em. I was thinking sand em down and using some filler primer then spraying it black. Anyone got easier ideas?

el_bandido
Account not Activated
2,757
29-06-2023, 12:57 PM
#13
Try using nova launcher with widgets fir the dash, will make pressing things easier while driving
el_bandido
29-06-2023, 12:57 PM #13

Try using nova launcher with widgets fir the dash, will make pressing things easier while driving

Wayne
Senior Member
607
29-06-2023, 02:22 PM
#14
Had a little look at the free one, seems alright. Gonna look at installing the USBROM and see what custom stuff that can do.
Wayne
29-06-2023, 02:22 PM #14

Had a little look at the free one, seems alright. Gonna look at installing the USBROM and see what custom stuff that can do.

Wayne
Senior Member
607
29-06-2023, 09:48 PM
#15
So tried to install USBROM, ended up getting stuck in boot loop. No idea what I did wrong. Followed guides, so I think I'm just gonna reset it to factory and not bother with such things until I have a better understanding.

Got it working with Timurs USBROM now...
Edited 10-08-2016, 08:27 AM by Wayne.
Wayne
29-06-2023, 09:48 PM #15

So tried to install USBROM, ended up getting stuck in boot loop. No idea what I did wrong. Followed guides, so I think I'm just gonna reset it to factory and not bother with such things until I have a better understanding.

Got it working with Timurs USBROM now...

is200turbo
Posting Freak
815
29-06-2023, 11:15 PM
#16
Looking good mate, what size is the screen


Sent from my iPhone using Tapatalk
is200turbo
29-06-2023, 11:15 PM #16

Looking good mate, what size is the screen


Sent from my iPhone using Tapatalk

Wayne
Senior Member
607
30-06-2023, 08:08 AM
#17
7 inch. Total size is 194mm by 120mm, so its abi cramped in the head unit space. Trying to work out a way to secure it. I'm thinking Velcro for that ease of removal

Sent from my Nexus 7 using Tapatalk
Wayne
30-06-2023, 08:08 AM #17

7 inch. Total size is 194mm by 120mm, so its abi cramped in the head unit space. Trying to work out a way to secure it. I'm thinking Velcro for that ease of removal

Sent from my Nexus 7 using Tapatalk

Wayne
Senior Member
607
01-07-2023, 01:09 PM
#18
Tasker makes my brain hurt! Only thing I've managed to successfully do so far is make the tablet play music as soon as the 3.5mm is inserted. Anybody with the skillz to walk an idiot through how to use it?

Fascia is starting to come along though. Fine fill the fascia, felt it up inside,paint it, job done. Quite impressed by my first attempt. Defo need to grab a right angled 3.5mm jack adapter though, it's not liking the straight ones. I can also see that fiddling with tucking the wires back into place is gonna get boring very quickly. Need to have a think about that. I suppose I could have had it slide in sideways rather then from the top and somehow meshed the jack and miniusb to the holder. But I'd have needed to get it spot on and I'm not that confident of my skills.

[Image: 8wwrbk.jpg]

[Image: 5ppvkl.jpg]

Need a slight rethink on the cradle. Needs to be pushed out at the bottom a tad more.

[Image: qr0ltd.jpg]

Even managed to squeeze my volume control in, which I was quite pleased about.

[Image: 34nmnba.jpg]

[Image: 20qyxqq.jpg]


Gonna grab a new amp at some point as the one I have is falling to bits. Only two of my four channels work and the female RCA connector is wobbly. Drivers side door speaker farts, so when I grab a new amp I'm gutting the sound system and redoing it, plus some of the screw turns have snapped off, so I'll 1) never get them undone or 2) never be able to tighten them back up. It's never been right since the day I bought it. No wonder he turned the radio off when we went for a test drive!
Edited 11-08-2016, 11:16 PM by Wayne.
Wayne
01-07-2023, 01:09 PM #18

Tasker makes my brain hurt! Only thing I've managed to successfully do so far is make the tablet play music as soon as the 3.5mm is inserted. Anybody with the skillz to walk an idiot through how to use it?

Fascia is starting to come along though. Fine fill the fascia, felt it up inside,paint it, job done. Quite impressed by my first attempt. Defo need to grab a right angled 3.5mm jack adapter though, it's not liking the straight ones. I can also see that fiddling with tucking the wires back into place is gonna get boring very quickly. Need to have a think about that. I suppose I could have had it slide in sideways rather then from the top and somehow meshed the jack and miniusb to the holder. But I'd have needed to get it spot on and I'm not that confident of my skills.

[Image: 8wwrbk.jpg]

[Image: 5ppvkl.jpg]

Need a slight rethink on the cradle. Needs to be pushed out at the bottom a tad more.

[Image: qr0ltd.jpg]

Even managed to squeeze my volume control in, which I was quite pleased about.

[Image: 34nmnba.jpg]

[Image: 20qyxqq.jpg]


Gonna grab a new amp at some point as the one I have is falling to bits. Only two of my four channels work and the female RCA connector is wobbly. Drivers side door speaker farts, so when I grab a new amp I'm gutting the sound system and redoing it, plus some of the screw turns have snapped off, so I'll 1) never get them undone or 2) never be able to tighten them back up. It's never been right since the day I bought it. No wonder he turned the radio off when we went for a test drive!

el_bandido
Account not Activated
2,757
01-07-2023, 10:55 PM
#19
I'd recommend a USB DAC if you are at all interested in sound quality. That will render your volume control knob useless though.
el_bandido
01-07-2023, 10:55 PM #19

I'd recommend a USB DAC if you are at all interested in sound quality. That will render your volume control knob useless though.

Wayne
Senior Member
607
02-07-2023, 01:36 AM
#20
I honestly don't think I would see much difference in sound quality. I was thinking the signal was gonna be hissy and weak, but its actually impressed me how decent it sounds.

Sent from my Nexus 7 using Tapatalk
Wayne
02-07-2023, 01:36 AM #20

I honestly don't think I would see much difference in sound quality. I was thinking the signal was gonna be hissy and weak, but its actually impressed me how decent it sounds.

Sent from my Nexus 7 using Tapatalk

Pages (4): Previous 1 2 3 4 Next
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)
Related Threads…
Replies 4
Views 688
20-03-2020, 01:35 AM
Last Post by ZAIS200
Replies 7
Views 884
04-02-2019, 10:15 AM
Last Post by toxo
Replies 0
Views 424
04-02-2019, 04:28 AM
Last Post by jomo
Replies 10
Views 1,337
02-06-2018, 02:28 AM
Last Post by bounty`
Replies 16
Views 1,802
23-04-2018, 02:54 PM
Last Post by Lexusboy
Replies 5
Views 629
13-04-2018, 12:26 PM
Last Post by Rabster
Replies 6
Views 787
31-05-2017, 09:59 AM
Last Post by Lexusboy