Clutch - IS200 vs Altezza
Clutch - IS200 vs Altezza
15-05-2016, 11:11 PM
Over on Toyo DIY it shows part numbers the same for the clutch plate but slightly different numbers for the clutch cover and release bearing. However, Exedy's website shows exactly the same components for both IS200 and Altezza.
So any Altezza clutch should fit ok ?
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-05-2016, 11:11 PM #1I'm starting to look around at new clutches. Am I right in thinking that the IS200 and Altezza use the same clutch components, i.e. release bearing as well as clutch plate, cover etc ?
Over on Toyo DIY it shows part numbers the same for the clutch plate but slightly different numbers for the clutch cover and release bearing. However, Exedy's website shows exactly the same components for both IS200 and Altezza.
So any Altezza clutch should fit ok ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-05-2016, 10:44 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-05-2016, 10:44 AM #2*cough* Anyone ? Stav ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-05-2016, 10:53 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-05-2016, 10:53 AM #3Well mine is running a UK Spec 3SGTE clutch and a standard gearbox if that helps?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
21-05-2016, 11:03 AM
2tongues Well mine is running a UK Spec 3SGTE clutch and a standard gearbox if that helps?
When you say UK Spec 3SGTE clutch, I thought the 3SGTEs were imports and not UK spec. Is that an MR2 clutch ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-05-2016, 11:03 AM #42tongues Well mine is running a UK Spec 3SGTE clutch and a standard gearbox if that helps?
When you say UK Spec 3SGTE clutch, I thought the 3SGTEs were imports and not UK spec. Is that an MR2 clutch ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-05-2016, 11:30 AM
Stav
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
21-05-2016, 11:30 AM #5Indeed an Altezza one does fit, but i think you have to use the standard IS200 bearing/
Stav
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
21-05-2016, 11:52 AM
Sparkystav Indeed an Altezza one does fit, but i think you have to use the standard IS200 bearing/Thanks, so the Altezza clutch cover fits the IS200 as well as the clutch disc itself ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-05-2016, 11:52 AM #6Sparkystav Indeed an Altezza one does fit, but i think you have to use the standard IS200 bearing/Thanks, so the Altezza clutch cover fits the IS200 as well as the clutch disc itself ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-05-2016, 12:57 PM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
21-05-2016, 12:57 PM #7ay it does
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
21-05-2016, 01:16 PM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
why you not just get a lexus one?not that expensive.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
21-05-2016, 11:36 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-05-2016, 11:36 PM #9Thanks guys. Good question Ormi. I might well just end up getting a Lexus OEM one, yes, that's one of the options. As you say they are not particularly expensive. Don't think I'll be getting a Lexus flywheel though ! :ohmy:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
24-05-2016, 02:46 PM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
how much you been quoted for a flywheel??matey
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)
Related Threads…
Replies 3
Views 240
Views 240
15-01-2022, 02:19 AM
Last Post byFOSSIL FUELS
Last Post by
Replies 2
Views 197
Views 197
27-04-2021, 11:43 PM
Last Post byel_bandido
Last Post by
Replies 28
Views 852
Views 852
24-04-2021, 04:30 AM
Last Post bylexusdaydreaming
Last Post by
Replies 2
Views 212
Views 212
12-02-2021, 12:02 PM
Last Post byel_bandido
Last Post by
Replies 1
Views 210
Views 210
30-08-2020, 12:09 AM
Last Post bySparkystav
Last Post by
Replies 18
Views 703
Views 703
20-08-2020, 08:52 AM
Last Post bydimis
Last Post by
Replies 4
Views 333
Views 333
30-03-2020, 06:30 AM
Last Post bySparkystav
Last Post by