JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Badly chipped front spoiler

Badly chipped front spoiler

Badly chipped front spoiler

icemahn
Member
137
23-12-2016, 04:46 AM
#1
I have a fiberglass front spoiler which seems to be chipped off easily. I will have to repaint it when the weather gets better but can anybody suggest a better way to prevent stone chips?

Are those anti-chip paint spray any good?

Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.
icemahn
23-12-2016, 04:46 AM #1

I have a fiberglass front spoiler which seems to be chipped off easily. I will have to repaint it when the weather gets better but can anybody suggest a better way to prevent stone chips?

Are those anti-chip paint spray any good?


Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.

Lexusboy
Posting Freak
9,267
23-12-2016, 04:50 AM
#2
To be honest this is a common problem, also it worth noting that Lexus use a very soft paint.
You may try buying a platic see through bra for the front of the car this could help stop the stone chips.

Ps lets here your funny commentsBig Grin
Lexusboy
23-12-2016, 04:50 AM #2

To be honest this is a common problem, also it worth noting that Lexus use a very soft paint.
You may try buying a platic see through bra for the front of the car this could help stop the stone chips.

Ps lets here your funny commentsBig Grin

parthiban
Posting Freak
4,925
23-12-2016, 04:53 AM
#3
I think Tango used ceramiclear for the clear coat and was quite happy with the results.

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
23-12-2016, 04:53 AM #3

I think Tango used ceramiclear for the clear coat and was quite happy with the results.


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

Bandit
Posting Freak
6,464
23-12-2016, 07:13 AM
#4
Clear vinyl is another thing that's used to help prevent stone chips, bit like a body wrap but clear? used to be able to buy kits off ebay to do the front of your bonnet or bumpers for not a lot of money, but does need doing in a clean environment so you don't get any dust under it when applying it? to form it round the curves you heat it with a hair dryer so it shrinks to fit Smile

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
23-12-2016, 07:13 AM #4

Clear vinyl is another thing that's used to help prevent stone chips, bit like a body wrap but clear? used to be able to buy kits off ebay to do the front of your bonnet or bumpers for not a lot of money, but does need doing in a clean environment so you don't get any dust under it when applying it? to form it round the curves you heat it with a hair dryer so it shrinks to fit Smile


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Sam B
Member
186
23-12-2016, 09:57 AM
#5
could be due to poor preperation before painting, see this often on bonnets and such.

[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces
Sam B
23-12-2016, 09:57 AM #5

could be due to poor preperation before painting, see this often on bonnets and such.


[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces

icemahn
Member
137
23-12-2016, 10:00 AM
#6
could be. I do need to fill the bigger craters with body filler, sand and prime again.

Could it be poor casting with the fiber glass, it sounded brittle when I got it.

Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.
icemahn
23-12-2016, 10:00 AM #6

could be. I do need to fill the bigger craters with body filler, sand and prime again.

Could it be poor casting with the fiber glass, it sounded brittle when I got it.


Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.

Sam B
Member
186
23-12-2016, 10:11 AM
#7
if its just stone chipping too easily and not cracking etc id say its more down to the prep and paint work. is it factory finish?

[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces
Sam B
23-12-2016, 10:11 AM #7

if its just stone chipping too easily and not cracking etc id say its more down to the prep and paint work. is it factory finish?


[Image: DWSIG2.jpg]
My engines nuts and bolts require more torque than your car produces

Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 3
Views 177
01-07-2020, 04:42 AM
Last Post by Sparkystav
Replies 13
Views 561
02-08-2019, 08:39 AM
Last Post by jasons
Replies 0
Views 290
28-07-2019, 04:57 AM
Last Post by Matt_C
Replies 1
Views 310
19-07-2019, 12:48 PM
Last Post by Chris0121
Replies 9
Views 589
15-07-2019, 08:10 AM
Last Post by micromarc
Replies 16
Views 764
01-04-2019, 04:02 AM
Last Post by lookatmybiceps
Replies 2
Views 337
15-01-2019, 05:15 AM
Last Post by avi_444
Replies 21
Views 1,029
28-11-2018, 10:22 AM
Last Post by sprinter2012