Greddy E-Manage Ultimate
Greddy E-Manage Ultimate
31-12-2016, 08:04 AM
jay_russell
31-12-2016, 08:04 AM #11to add to that i contacted them and they said that the ecu for both is200 and 300 were the same and assured me that it would work with the is200 1gfe so i would give them a mail and check it out first
31-12-2016, 09:27 AM
jay_russell to add to that i contacted them and they said that the ecu for both is200 and 300 were the same and assured me that it would work with the is200 1gfe so i would give them a mail and check it out first
That is good news, let us know once you have more information:thumbup:
LEXUS IS200 - The most fun car to go sideways
jay_russell to add to that i contacted them and they said that the ecu for both is200 and 300 were the same and assured me that it would work with the is200 1gfe so i would give them a mail and check it out first
That is good news, let us know once you have more information:thumbup:
LEXUS IS200 - The most fun car to go sideways
31-12-2016, 10:19 AM
jay_russell
31-12-2016, 10:19 AM #14this is who does the complete harness for the is300 they confirmed the harness is the same for is200 as the have the same ecu
31-12-2016, 11:45 PM
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
31-12-2016, 11:45 PM #15The ECU is totally different for the IS200 and IS300, they are different engines and have different pin-outs. e.g. see diagrams here and here. I would be very concerned about a company who says they are the same (assuming we're talking about the engine ECU and not a different ECU) !
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
01-01-2017, 12:31 AM
steviewevie The ECU is totally different for the IS200 and IS300, they are different engines and have different pin-outs. e.g. see diagrams here and here. I would be very concerned about a company who says they are the same (assuming we're talking about the engine ECU and not a different ECU) !
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
That is a good point mate.
LEXUS IS200 - The most fun car to go sideways
steviewevie The ECU is totally different for the IS200 and IS300, they are different engines and have different pin-outs. e.g. see diagrams here and here. I would be very concerned about a company who says they are the same (assuming we're talking about the engine ECU and not a different ECU) !
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
That is a good point mate.
LEXUS IS200 - The most fun car to go sideways
01-01-2017, 02:41 AM
steviewevie The ECU is totally different for the IS200 and IS300, they are different engines and have different pin-outs. e.g. see diagrams here and here. I would be very concerned about a company who says they are the same (assuming we're talking about the engine ECU and not a different ECU) !
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
The plugs though i believe are the same so you *could* possibly use it, you would just have to redo a few wire i reckon.
Rabster yeah the main ecu from the info i have from stav shows that the main ecu is very much still connected jut the emanage interprets it all 1st i think, so i will be moving both ecu's as they are in my way for the next project
Yes thats hpw the emanage ultimate works, its a piggy back ecu.
It take the signals the engine is sending out and changes them so the ecu thinks its different. (boost level, etc)
then takes the signals the ecu sends out and changes them before they get to the engine (fuel injector signals, etc)
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
01-01-2017, 02:41 AM #18steviewevie The ECU is totally different for the IS200 and IS300, they are different engines and have different pin-outs. e.g. see diagrams here and here. I would be very concerned about a company who says they are the same (assuming we're talking about the engine ECU and not a different ECU) !
Stav can comment better than me, but I would have thought the e-Manage Ultimate wouldn't remove any wires from the ECU at all, it's just connected in to some of the wiring.
The plugs though i believe are the same so you *could* possibly use it, you would just have to redo a few wire i reckon.
Rabster yeah the main ecu from the info i have from stav shows that the main ecu is very much still connected jut the emanage interprets it all 1st i think, so i will be moving both ecu's as they are in my way for the next project
Yes thats hpw the emanage ultimate works, its a piggy back ecu.
It take the signals the engine is sending out and changes them so the ecu thinks its different. (boost level, etc)
then takes the signals the ecu sends out and changes them before they get to the engine (fuel injector signals, etc)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
01-01-2017, 02:55 AM
Sparkystav The plugs though i believe are the same so you *could* possibly use it, you would just have to redo a few wire i reckon.I might well be looking at the wrong thing, but on the diagrams that I posted links to, the IS200 ECU has plugs with three rows of pins, but the IS300 ECU has four rows of pins on each plug. So I don't see how an IS300 harness would help :confused1:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-01-2017, 02:55 AM #19Sparkystav The plugs though i believe are the same so you *could* possibly use it, you would just have to redo a few wire i reckon.I might well be looking at the wrong thing, but on the diagrams that I posted links to, the IS200 ECU has plugs with three rows of pins, but the IS300 ECU has four rows of pins on each plug. So I don't see how an IS300 harness would help :confused1:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
01-01-2017, 03:05 AM
well there goes my idea lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
01-01-2017, 03:05 AM #20good point stevie, hadnt actually looked at your links.
well there goes my idea lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 7
Views 534
Views 534
08-10-2023, 03:01 AM
Last Post byphaebo
Last Post by
Replies 12
Views 469
Views 469
27-02-2020, 06:01 AM
Last Post bySparkystav
Last Post by
Replies 4
Views 312
Views 312
03-10-2019, 11:45 AM
Last Post byJayJay1374
Last Post by