JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Brakes & Suspension front suspension top mounts

front suspension top mounts

front suspension top mounts

lexynik
Unregistered
 
15-01-2017, 01:46 PM
#1
does anyone know how much these are ? is200 auto 1999
lexynik
15-01-2017, 01:46 PM #1

does anyone know how much these are ? is200 auto 1999

steviewevie
Posting Freak
7,993
15-01-2017, 11:42 PM
#2
For the OEM suspension ? Have they rusted up or something ? Which bit exactly do you need ?

You would probably be better off getting one from a breaker's. e.g. part of the upper mount is about £60 from Lexus/Toyota ?

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-01-2017, 11:42 PM #2

For the OEM suspension ? Have they rusted up or something ? Which bit exactly do you need ?

You would probably be better off getting one from a breaker's. e.g. part of the upper mount is about £60 from Lexus/Toyota ?


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

lexynik
Unregistered
 
16-01-2017, 03:23 AM
#3
thanks steve-you are correct i just rang lexus- £58 inc vat each - i will be hoping mine are fine-it has been suggested to me they could be the cause of the slight knock on my car so i was going to get them done at the same time as shocks and droplinks-but at that price and having spent £300 on knock/handling issues i will be keeping my fingers crossed theyre not needed-just would really like all problems resolved by the time i leave wim as ive got a lot of other things going on in life and am hoping to stop spending time and money fixing this car and instead start gettting some use and enjoyment from it -- fingers crossed-thanks
lexynik
16-01-2017, 03:23 AM #3

thanks steve-you are correct i just rang lexus- £58 inc vat each - i will be hoping mine are fine-it has been suggested to me they could be the cause of the slight knock on my car so i was going to get them done at the same time as shocks and droplinks-but at that price and having spent £300 on knock/handling issues i will be keeping my fingers crossed theyre not needed-just would really like all problems resolved by the time i leave wim as ive got a lot of other things going on in life and am hoping to stop spending time and money fixing this car and instead start gettting some use and enjoyment from it -- fingers crossed-thanks

steviewevie
Posting Freak
7,993
16-01-2017, 05:07 AM
#4
I would get the shocks and droplinks done first, I bet those will cure your knocking problems.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-01-2017, 05:07 AM #4

I would get the shocks and droplinks done first, I bet those will cure your knocking problems.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

lexynik
Unregistered
 
16-01-2017, 08:21 AM
#5
yup hopefully,at least i will have a nice two hour test drive home from wim to enjoy
lexynik
16-01-2017, 08:21 AM #5

yup hopefully,at least i will have a nice two hour test drive home from wim to enjoy

aaronabbott
Posting Freak
804
16-01-2017, 12:57 PM
#6
my knocking was caused by my worn anti-roll bar links:thumbup1:

ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
16-01-2017, 12:57 PM #6

my knocking was caused by my worn anti-roll bar links:thumbup1:


ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers

lexynik
Unregistered
 
16-01-2017, 01:38 PM
#7
so i should be ok then ? spoke to lex this morning and they said they have changed hundreds of shocks and droplinks but not ever topmounts - kinda does beg the question why not when theres obviously a lot of is owners past and present who live with these little "knocks" and cant get them cured for long periods (years sometimes if all the writing on L*C is written is earnest)
lexynik
16-01-2017, 01:38 PM #7

so i should be ok then ? spoke to lex this morning and they said they have changed hundreds of shocks and droplinks but not ever topmounts - kinda does beg the question why not when theres obviously a lot of is owners past and present who live with these little "knocks" and cant get them cured for long periods (years sometimes if all the writing on L*C is written is earnest)

Bandit
Posting Freak
6,464
16-01-2017, 02:34 PM
#8
To be honest i can't see the top plate actually knocking on the IS200/300 as it's basically a metal plate on top of a big rubber that sits on top of the spring, which is bolted to the centre section of the strut itself?

On my is200 i changed the Anti roll bar rubbers due to them being worn out and soft(9 years old?), you could see the arb moving in them and pushing the arb upwards when steering then it dropped again which caused a clunk, the arb seemed to jump and clunk as you moved the steering left or right,

With the new bushes and drop links mine was great, no more clunking sounds,

When your at WIM see if they'll turn the wheels for you full lock left to right, while you stand under the car when its up on the ramp and watch the arb at the front, mine slid from side to side in the bushes and seemed to lift then drop causing it to clunk when the steering was straightened up?

This is where i got my bushes from CLICK ME?
Edited 28-02-2010, 12:20 AM by Bandit.

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
16-01-2017, 02:34 PM #8

To be honest i can't see the top plate actually knocking on the IS200/300 as it's basically a metal plate on top of a big rubber that sits on top of the spring, which is bolted to the centre section of the strut itself?

On my is200 i changed the Anti roll bar rubbers due to them being worn out and soft(9 years old?), you could see the arb moving in them and pushing the arb upwards when steering then it dropped again which caused a clunk, the arb seemed to jump and clunk as you moved the steering left or right,

With the new bushes and drop links mine was great, no more clunking sounds,

When your at WIM see if they'll turn the wheels for you full lock left to right, while you stand under the car when its up on the ramp and watch the arb at the front, mine slid from side to side in the bushes and seemed to lift then drop causing it to clunk when the steering was straightened up?

This is where i got my bushes from CLICK ME?


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

lexynik
Unregistered
 
16-01-2017, 03:04 PM
#9
cheers bandit,that kinda reassures me-i spoke to tony at wim about arb bushes and he said he would check them when its on the ramp-he also said it would not affect his geo settings if they get replaced after geo when i get back to brighton which kinda de-stressed me as wim dont stock and lexus said they may struggle to get them in by thursday-it took them 8 days to get me a new gearknob-i just hate goin into some area-ie suspension and not bein thorough enough and having to do the same jobs twice-but from what you and lexus say i should be ok with what i have---- except that i tend to work within the confines of "murphys law" when it comes to cars ie "whatever can go wrong,will go wrong" its a special kinda luck i inherited but once you recognise it and plan accordingly you make your own luck which is usually better
lexynik
16-01-2017, 03:04 PM #9

cheers bandit,that kinda reassures me-i spoke to tony at wim about arb bushes and he said he would check them when its on the ramp-he also said it would not affect his geo settings if they get replaced after geo when i get back to brighton which kinda de-stressed me as wim dont stock and lexus said they may struggle to get them in by thursday-it took them 8 days to get me a new gearknob-i just hate goin into some area-ie suspension and not bein thorough enough and having to do the same jobs twice-but from what you and lexus say i should be ok with what i have---- except that i tend to work within the confines of "murphys law" when it comes to cars ie "whatever can go wrong,will go wrong" its a special kinda luck i inherited but once you recognise it and plan accordingly you make your own luck which is usually better

steviewevie
Posting Freak
7,993
17-01-2017, 12:44 AM
#10
Yeah I think a lot of "knocking noise" problems are to do with ARBs, whether it's the drop links or the bushes.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
17-01-2017, 12:44 AM #10

Yeah I think a lot of "knocking noise" problems are to do with ARBs, whether it's the drop links or the bushes.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 1
Views 178
18-10-2021, 01:58 AM
Last Post by Rabster
Replies 8
Views 330
18-04-2021, 02:49 PM
Last Post by Timbo
Replies 2
Views 255
03-11-2020, 07:28 AM
Last Post by argyle dan
Replies 2
Views 257
20-07-2019, 01:32 AM
Last Post by jomo
Replies 4
Views 414
07-04-2019, 09:04 AM
Last Post by Lexuspat
Replies 6
Views 482
11-07-2018, 10:12 PM
Last Post by rob
Replies 14
Views 954
02-02-2018, 06:37 AM
Last Post by ekme
Replies 3
Views 324
31-08-2017, 01:08 AM
Last Post by Fozzy
Replies 4
Views 395
29-07-2017, 10:09 PM
Last Post by TimmyK