Bobby's Old IS200
Bobby's Old IS200
Do you know how to solder? if so i can walk you through the fix if you get a HKS FCD then you dont need the garage at all.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2017, 09:33 AM #12glad i could help mate! and welcome across!
Do you know how to solder? if so i can walk you through the fix if you get a HKS FCD then you dont need the garage at all.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Crysec I've had some help in another forum, amazingly I posted the problem and it was anwered in about 10 mins. I'm not a mechanic, but 10mins for a positive diagnostic versus 2 months of Lexus not knowing what was wrong it pretty embarrassing for them I'd say.
That would have been from our very own Stav :thumbup::thumbup:
Welcome to the club by the way, and where are you from ??
Do you live in Aberdeen
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Crysec I've had some help in another forum, amazingly I posted the problem and it was anwered in about 10 mins. I'm not a mechanic, but 10mins for a positive diagnostic versus 2 months of Lexus not knowing what was wrong it pretty embarrassing for them I'd say.
That would have been from our very own Stav :thumbup::thumbup:
Welcome to the club by the way, and where are you from ??
Do you live in Aberdeen
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
looks better than my house does =/
Ohh and to Lexusboy the code was "P1510, air pressure not high enough at intake manifold" which Stav got a fix for.. . many thanks stav!
I can solder fine, but to be honest the problem has been sapping at my soul for so long now I just informed Lexus with your diagnosis and the penny dropped with them. I'll let them do it and go to town if they charge for hours prior to fixing it. How bad is it that a customer has to inform you what's wrong =)
I'll know where to go next time for good advice, right here. I'm ok usually with mechanical stuff, but the electronic / diagnostic stuff is pretty hard to get my head round!
Thanks for the welcome Gord!
better picture here --> http://xiiix.org/MyIS200tte.jpg
looks better than my house does =/
Ohh and to Lexusboy the code was "P1510, air pressure not high enough at intake manifold" which Stav got a fix for.. . many thanks stav!
I can solder fine, but to be honest the problem has been sapping at my soul for so long now I just informed Lexus with your diagnosis and the penny dropped with them. I'll let them do it and go to town if they charge for hours prior to fixing it. How bad is it that a customer has to inform you what's wrong =)
I'll know where to go next time for good advice, right here. I'm ok usually with mechanical stuff, but the electronic / diagnostic stuff is pretty hard to get my head round!
Thanks for the welcome Gord!
http://www.pistonheads.com/SALES/1485964.htm
But yeah, I should cut them *some* slack. I'm lumping "passion" with "work", they rarely mix.. .
That's what I was told Gord yes. The mechanic said and I quote, "In ten years of working on IS200s I've never seen a TTE". Coincidently check out the service history on this one I found today!
http://www.pistonheads.com/SALES/1485964.htm
But yeah, I should cut them *some* slack. I'm lumping "passion" with "work", they rarely mix.. .
Pontyender41
23-02-2017, 10:22 AM #19Are the wheels kato? If so i can vouch for them being a pain to keep clean i use rimwax on mine seems to help :thumbup1:
Crysec That's what I was told Gord yes. The mechanic said and I quote, "In ten years of working on IS200s I've never seen a TTE". Coincidently check out the service history on this one I found today!
http://www.pistonheads.com/SALES/1485964.htm
But yeah, I should cut them *some* slack. I'm lumping "passion" with "work", they rarely mix.. .
That was a lad called Jay's.
Incidently ive done a lot of wiring work on that as well
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2017, 10:22 AM #20Crysec That's what I was told Gord yes. The mechanic said and I quote, "In ten years of working on IS200s I've never seen a TTE". Coincidently check out the service history on this one I found today!
http://www.pistonheads.com/SALES/1485964.htm
But yeah, I should cut them *some* slack. I'm lumping "passion" with "work", they rarely mix.. .
That was a lad called Jay's.
Incidently ive done a lot of wiring work on that as well
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
4 Guest(s)
4 Guest(s)
Views 235
Last Post by
Views 310
Last Post by
Views 202
Last Post by
Views 3,743
Last Post by
Views 553
Last Post by
Views 230
Last Post by