JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Who's got coilovers?

Who's got coilovers?

Who's got coilovers?

Pages (3): Previous 1 2 3 Next
Asi
Posting Freak
2,510
25-04-2017, 02:26 AM
#11
The HSD at softest settings still feel quite hard and at hardest setting they are very hard you could feel everything on the road. it all depends what you want from the coilovers. i was not too bothered about the ride comfort so got HSD and they are comfy at the softest setting. Also ARB is a very good mod increases handline by a lot. with both coilovers and ARB's will handle very well and you will love the car mate

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
25-04-2017, 02:26 AM #11

The HSD at softest settings still feel quite hard and at hardest setting they are very hard you could feel everything on the road. it all depends what you want from the coilovers. i was not too bothered about the ride comfort so got HSD and they are comfy at the softest setting. Also ARB is a very good mod increases handline by a lot. with both coilovers and ARB's will handle very well and you will love the car mate


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

micromarc
Member
203
25-04-2017, 03:05 AM
#12
I ve got a set of twin super streets I think with the edc controller. Worth the extra money as you can adjust the dampening from in the car. For example on the motorway I set them as hard as they ll go. And then a bumpy cobbled road for instance I can set them soft for a nice smooth rideSmile
micromarc
25-04-2017, 03:05 AM #12

I ve got a set of twin super streets I think with the edc controller. Worth the extra money as you can adjust the dampening from in the car. For example on the motorway I set them as hard as they ll go. And then a bumpy cobbled road for instance I can set them soft for a nice smooth rideSmile

micromarc
Member
203
25-04-2017, 03:08 AM
#13
Ment to say teins lol
micromarc
25-04-2017, 03:08 AM #13

Ment to say teins lol

Asi
Posting Freak
2,510
25-04-2017, 04:18 AM
#14
i like the tein EDC controlller. makes life a lot easier

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
25-04-2017, 04:18 AM #14

i like the tein EDC controlller. makes life a lot easier


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

iano21
Member
89
25-04-2017, 01:11 PM
#15
asi. . if you ever decide does HSD are too hard they do another spring set that are a good bit softer so all you have to do is change the springs!!

but i have the same as you and feel the little bit of a harder drive is well worth it for the advantages they give :thumbup:
iano21
25-04-2017, 01:11 PM #15

asi. . if you ever decide does HSD are too hard they do another spring set that are a good bit softer so all you have to do is change the springs!!

but i have the same as you and feel the little bit of a harder drive is well worth it for the advantages they give :thumbup:

Asi
Posting Freak
2,510
25-04-2017, 02:14 PM
#16
yeah i was thinking to change the springs but going to see how the feels once the car is on the road with the new engine in it

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
25-04-2017, 02:14 PM #16

yeah i was thinking to change the springs but going to see how the feels once the car is on the road with the new engine in it


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

iano21
Member
89
26-04-2017, 02:10 AM
#17
yeah i would say that V8 will be a bit heavier lol. . you far off finishing?
iano21
26-04-2017, 02:10 AM #17

yeah i would say that V8 will be a bit heavier lol. . you far off finishing?

Asi
Posting Freak
2,510
26-04-2017, 09:38 AM
#18
i dont think the v8 itself is heavier than the is200 engine as its aluminium constructed but the rest of the piping and turbo etc will make it heavier

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
26-04-2017, 09:38 AM #18

i dont think the v8 itself is heavier than the is200 engine as its aluminium constructed but the rest of the piping and turbo etc will make it heavier


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

LEX11S
Senior Member
287
30-04-2017, 02:20 AM
#19
I have tein basics on mine with uprated anti roll bars people who get in my car people say its a very good ride for coilovers its as smooth as a babys bum

Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
LEX11S
30-04-2017, 02:20 AM #19

I have tein basics on mine with uprated anti roll bars people who get in my car people say its a very good ride for coilovers its as smooth as a babys bum


Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.

link005
Junior Member
3
27-05-2017, 03:47 AM
#20
i have Tein super street dampers with upper mount cost me around 920.00 I also bought the Tein EDFC(electronic damper force control unit) which is 295.oo something..I have its installed in WIM --then have my geo done. The height of the care was already set up well with the Tein and no need to adjust to be lowered especially we have alot of bumps around UK. I have the setting done as a high way for now as I am waiting for my EDFC to be installed so then i can control everything inside the car with ease. (wish someone can help me Wink

but anyway best thing ever done as the car is a bit more responsive and not much body roll. Also next step for me is buying the anti roll bar (hotchkis $300.00 american)
link005
27-05-2017, 03:47 AM #20

i have Tein super street dampers with upper mount cost me around 920.00 I also bought the Tein EDFC(electronic damper force control unit) which is 295.oo something..I have its installed in WIM --then have my geo done. The height of the care was already set up well with the Tein and no need to adjust to be lowered especially we have alot of bumps around UK. I have the setting done as a high way for now as I am waiting for my EDFC to be installed so then i can control everything inside the car with ease. (wish someone can help me Wink

but anyway best thing ever done as the car is a bit more responsive and not much body roll. Also next step for me is buying the anti roll bar (hotchkis $300.00 american)

Pages (3): Previous 1 2 3 Next
Recently Browsing
 3 Guest(s)
Recently Browsing
 3 Guest(s)
Related Threads…
Replies 16
Views 1,001
06-03-2018, 03:15 AM
Last Post by Bandit
Replies 28
Views 1,907
05-01-2018, 03:22 PM
Last Post by Rabster