The time has come, Getting ready for winter!!
The time has come, Getting ready for winter!!
29-05-2017, 09:14 AM
Wish I'd got that power in mine
I'd definately consider rebuilding tho whilst it's out.
Can imagine once in the car space will be tight
That looks fun to do
Wish I'd got that power in mine
I'd definately consider rebuilding tho whilst it's out.
Can imagine once in the car space will be tight
29-05-2017, 10:46 AM
James S Nice engine fella, you uprating the turbo then to gain the 450+ bhp???
What box you going to use??
yeah going big single, Uprated injectors, fuel rail and pump. going AEM Standalone atm but may change and keeping the IS200 ecu to run the lights etc. loads of other toys too but see how funds stretch first!!
Rabster Thinking about it sam make sure you keep for you own records if not everyone else details of any mounts you have made and any problems you encounter....
many of us can probably help you overcome little snags....
Yeah defently when i get more parts together il make a build diary and included everything i can to show how i went about it all!
The engine i have is a mid sump and i need a front sump. Just looked into it and a IS300 sump fits it all nicely and im guessing from images/workshop pictures that possibly the IS300 mounts may work? but i may be mistaken?! seems that all the JZ stuff bolts up and is interchangable. seeing as the IS300 is a 2jz-ge it should in theory?Chri5 That looks fun to do
Wish I'd got that power in mine
I'd definately consider rebuilding tho whilst it's out.
Can imagine once in the car space will be tight
Atm im not planning too rebuild it, the engine looks in very good condition! il get the sump off this week and have a butchers.
purplewitch 500bhp
haha! yeah its bad enough with my turbo IS now let alone when its 1jzgte powered
![[Image: DWSIG2.jpg]](http://i18.photobucket.com/albums/b127/samsupra/DWSIG2.jpg)
My engines nuts and bolts require more torque than your car produces
James S Nice engine fella, you uprating the turbo then to gain the 450+ bhp???
What box you going to use??
yeah going big single, Uprated injectors, fuel rail and pump. going AEM Standalone atm but may change and keeping the IS200 ecu to run the lights etc. loads of other toys too but see how funds stretch first!!
Rabster Thinking about it sam make sure you keep for you own records if not everyone else details of any mounts you have made and any problems you encounter....
many of us can probably help you overcome little snags....
Yeah defently when i get more parts together il make a build diary and included everything i can to show how i went about it all!
The engine i have is a mid sump and i need a front sump. Just looked into it and a IS300 sump fits it all nicely and im guessing from images/workshop pictures that possibly the IS300 mounts may work? but i may be mistaken?! seems that all the JZ stuff bolts up and is interchangable. seeing as the IS300 is a 2jz-ge it should in theory?Chri5 That looks fun to do
Wish I'd got that power in mine
I'd definately consider rebuilding tho whilst it's out.
Can imagine once in the car space will be tight
Atm im not planning too rebuild it, the engine looks in very good condition! il get the sump off this week and have a butchers.
purplewitch 500bhp
haha! yeah its bad enough with my turbo IS now let alone when its 1jzgte powered
My engines nuts and bolts require more torque than your car produces
29-05-2017, 01:10 PM
LEXUS IS200 - The most fun car to go sideways
29-05-2017, 01:56 PM
dimis From what i know from my friend's IS, which has a 2JZGTE installed he used an IS300 sump for the same reason you mentioned and it matches perfectly. I hope it is the same for the 1JZGTE also.
According to a few websites all the JZ engines are mainly interchangable. Could you find out what mounts hes using? i know a few people are saying two inlet side GS300 mounts but im really tempted by trying IS300 mounts.
dimis This is going to be a very interesting project mate. i am looking forward to see your progress? What happened with your turbo engine? Did you manage to sell it? How come you did not go for a 2JZGTE motor mate?
still got it and running it till end of show season, then selling it on to fund this project
ive got for the 1jz mainly down to cost! alot cheaper for not much less performance really.
My engines nuts and bolts require more torque than your car produces
dimis From what i know from my friend's IS, which has a 2JZGTE installed he used an IS300 sump for the same reason you mentioned and it matches perfectly. I hope it is the same for the 1JZGTE also.
According to a few websites all the JZ engines are mainly interchangable. Could you find out what mounts hes using? i know a few people are saying two inlet side GS300 mounts but im really tempted by trying IS300 mounts.
dimis This is going to be a very interesting project mate. i am looking forward to see your progress? What happened with your turbo engine? Did you manage to sell it? How come you did not go for a 2JZGTE motor mate?
still got it and running it till end of show season, then selling it on to fund this project
ive got for the 1jz mainly down to cost! alot cheaper for not much less performance really.
My engines nuts and bolts require more torque than your car produces
Recently Browsing
3 Guest(s)
3 Guest(s)
Recently Browsing
3 Guest(s)
3 Guest(s)
Related Threads…
Replies 11
Views 653
Views 653
12-07-2018, 05:26 AM
Last Post bysprinter2012
Last Post by
Replies 19
Views 1,121
Views 1,121
06-07-2018, 02:31 AM
Last Post byjimxms
Last Post by
Replies 5
Views 401
Views 401
17-08-2017, 11:46 AM
Last Post byMoley
Last Post by