JapCarForum Club Sponsor Invisible Touch Detailing My Single Turbo Supra

My Single Turbo Supra

My Single Turbo Supra

Pages (5): 1 2 3 4 5 Next
19-06-2017, 05:34 AM
#1
Thought i would start this thread to keep track of whats going on with my own car Smile

Collected the car yesterday after some bits being done and finally after months of the interior being stripped i've put it back together today Smile

Its had new coil pack connectors and the emanage soldered after a chip fell off the motherboard. The manifold has been welded after a couple of cracks appeared, i hope this will at least last the summer out then i can look at replacing it next year. Re-wrapped manifold and downpipe. New terminals have been soldered onto the coolant temperature sensor as one was hanging off and one only just connected. This appears to have fixed a hot start issue (as expected) where sometimes it didnt want to start if run, switched off and then started fairly soon. Quite embarrasing at petrol stations! Smile New fuel filter (all the rest was serviced by b'have a few hundred miles ago) New UK front discs from Toyota and CW front pads. A new fan shroud as the old one was cracked. New negative battery terminal to earth as the old one had a quick release system which was corroded and again causing start issues. Finally 4 new Eagle F1's.

For the interior, it was showing its age badly so i got a mint condition facelift black carpet from Dude, i wrapped 2 of the easy dash panels in carbon fabric and gave the rest to blueangel to sort Smile New dials from Skewer and gave these to Heckler along with the rest of the dash bits for a red led conversion. Finally aluminum rings to finish the dash off Smile

When i got the car the dash was like this

[Image: SL7402742028Large29.jpg]

After a strip down it looked like this

[Image: DSC00449.jpg]

[Image: DSC00450.jpg]

[Image: DSC00451.jpg]

[Image: DSC00452.jpg]

[Image: DSC00456.jpg]

And then back together. Really happy with how it has turned out Smile Such a nicer place to sit in. Some of the pics make the carbon look very green against the black dash but its not like that in real life, just naff camera. Will do a proper mount in the spare dash hole for the purple usb cable for the emanage, just tucked it through there and behind the boost controller for now. Also managed to break a couple of the clips holding the plastic on by the accelerator so will order them and get that back on.

[Image: P1050882.jpg]

[Image: P1050883.jpg]

[Image: P1050884.jpg]

[Image: P1050885.jpg]

[Image: P1050890.jpg]

[Image: P1050892.jpg]

[Image: P1050893.jpg]

[Image: P1050894.jpg]
Invisible Touch Detailing
19-06-2017, 05:34 AM #1

Thought i would start this thread to keep track of whats going on with my own car Smile

Collected the car yesterday after some bits being done and finally after months of the interior being stripped i've put it back together today Smile

Its had new coil pack connectors and the emanage soldered after a chip fell off the motherboard. The manifold has been welded after a couple of cracks appeared, i hope this will at least last the summer out then i can look at replacing it next year. Re-wrapped manifold and downpipe. New terminals have been soldered onto the coolant temperature sensor as one was hanging off and one only just connected. This appears to have fixed a hot start issue (as expected) where sometimes it didnt want to start if run, switched off and then started fairly soon. Quite embarrasing at petrol stations! Smile New fuel filter (all the rest was serviced by b'have a few hundred miles ago) New UK front discs from Toyota and CW front pads. A new fan shroud as the old one was cracked. New negative battery terminal to earth as the old one had a quick release system which was corroded and again causing start issues. Finally 4 new Eagle F1's.

For the interior, it was showing its age badly so i got a mint condition facelift black carpet from Dude, i wrapped 2 of the easy dash panels in carbon fabric and gave the rest to blueangel to sort Smile New dials from Skewer and gave these to Heckler along with the rest of the dash bits for a red led conversion. Finally aluminum rings to finish the dash off Smile

When i got the car the dash was like this

[Image: SL7402742028Large29.jpg]

After a strip down it looked like this

[Image: DSC00449.jpg]

[Image: DSC00450.jpg]

[Image: DSC00451.jpg]

[Image: DSC00452.jpg]

[Image: DSC00456.jpg]

And then back together. Really happy with how it has turned out Smile Such a nicer place to sit in. Some of the pics make the carbon look very green against the black dash but its not like that in real life, just naff camera. Will do a proper mount in the spare dash hole for the purple usb cable for the emanage, just tucked it through there and behind the boost controller for now. Also managed to break a couple of the clips holding the plastic on by the accelerator so will order them and get that back on.

[Image: P1050882.jpg]

[Image: P1050883.jpg]

[Image: P1050884.jpg]

[Image: P1050885.jpg]

[Image: P1050890.jpg]

[Image: P1050892.jpg]

[Image: P1050893.jpg]

[Image: P1050894.jpg]

19-06-2017, 05:35 AM
#2
[Image: P1050895.jpg]

[Image: P1050896.jpg]

[Image: P1050897.jpg]

[Image: P1050898.jpg]

[Image: P1050899.jpg]

[Image: P1050900.jpg]

[Image: P1050901.jpg]

[Image: P1050902.jpg]

[Image: P1050903.jpg]

Quite fancy a set of these seats and will need to update the steering wheel at some point to. But it will have to be bodywork next as it badly needs it Smile

[Image: bossmicrosuede.jpg]
Invisible Touch Detailing
19-06-2017, 05:35 AM #2

[Image: P1050895.jpg]

[Image: P1050896.jpg]

[Image: P1050897.jpg]

[Image: P1050898.jpg]

[Image: P1050899.jpg]

[Image: P1050900.jpg]

[Image: P1050901.jpg]

[Image: P1050902.jpg]

[Image: P1050903.jpg]

Quite fancy a set of these seats and will need to update the steering wheel at some point to. But it will have to be bodywork next as it badly needs it Smile

[Image: bossmicrosuede.jpg]

Rabster
Posting Freak
10,234
19-06-2017, 05:41 AM
#3
looks great :drool:
Rabster
19-06-2017, 05:41 AM #3

looks great :drool:

19-06-2017, 05:45 AM
#4
Cheers matey Smile

Some of the names mentioned in the thread wont mean anything to you guys as they are from the Supra club and i copied this from there.
Invisible Touch Detailing
19-06-2017, 05:45 AM #4

Cheers matey Smile

Some of the names mentioned in the thread wont mean anything to you guys as they are from the Supra club and i copied this from there.

russelllinn
Posting Freak
1,034
19-06-2017, 06:16 AM
#5
nice touches there it has made such a big difference looks spot on, like the gauges and lighting :thumbup1:

[Image: AliceTrack-1.jpg]

Have a look at my Scooby project thread here

My garage

Subaru
russelllinn
19-06-2017, 06:16 AM #5

nice touches there it has made such a big difference looks spot on, like the gauges and lighting :thumbup1:


[Image: AliceTrack-1.jpg]

Have a look at my Scooby project thread here

My garage

Subaru

Tango
Senior Member
314
19-06-2017, 08:42 AM
#6
Looking really good Christian. Looking forward to seeing it with the new paint :thumbup1:

IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]
Tango
19-06-2017, 08:42 AM #6

Looking really good Christian. Looking forward to seeing it with the new paint :thumbup1:


IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]

Sparkystav
Administrator
14,683
19-06-2017, 09:20 AM
#7
Looks good mate,

OutlawJapClub Admin Team
Sparkystav
19-06-2017, 09:20 AM #7

Looks good mate,


OutlawJapClub Admin Team

banky
Senior Member
253
19-06-2017, 09:30 AM
#8
looks gr8 bud love supras
banky
19-06-2017, 09:30 AM #8

looks gr8 bud love supras

Lexusboy
Posting Freak
9,267
19-06-2017, 12:25 PM
#9
Looking good Christian are the carpet brand new or did the guy dude buy them for his car and not use them as they look brand new?

Are you likely to get the outside done before JAE?
Lexusboy
19-06-2017, 12:25 PM #9

Looking good Christian are the carpet brand new or did the guy dude buy them for his car and not use them as they look brand new?

Are you likely to get the outside done before JAE?

20-06-2017, 12:05 AM
#10
Cheers guys. Dude works for a tuning company called AFR in Crawley. They get cars in sometimes that are stripped and sold for parts. I managed to get this facelift carpet from a very very low mileage car off him. Condition wise it really is mint. A nice carpet can make such a difference compared with an old ripped very dirty grey one.

Sadly the paint will definetly not be done by JAE, its going to be more towards the end of this year.
Invisible Touch Detailing
20-06-2017, 12:05 AM #10

Cheers guys. Dude works for a tuning company called AFR in Crawley. They get cars in sometimes that are stripped and sold for parts. I managed to get this facelift carpet from a very very low mileage car off him. Condition wise it really is mint. A nice carpet can make such a difference compared with an old ripped very dirty grey one.

Sadly the paint will definetly not be done by JAE, its going to be more towards the end of this year.

Pages (5): 1 2 3 4 5 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 13
Views 551
28-04-2021, 12:09 PM
Last Post by 350zLad
Replies 7
Views 386
10-03-2020, 03:45 AM
Last Post by sprinter2012
Replies 7
Views 399
03-12-2019, 09:00 AM
Last Post by Barry
Replies 33
Views 1,797
25-07-2019, 03:58 AM
Last Post by toxo
Replies 21
Views 1,008
07-04-2019, 02:47 PM
Last Post by mplavery
Replies 14
Views 946
05-09-2018, 01:37 AM
Last Post by Stoney
Replies 13
Views 882
10-03-2018, 12:31 PM
Last Post by DaveEdin
Replies 13
Views 1,007
28-08-2017, 11:49 AM
Last Post by ormi
Replies 19
Views 1,159