JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Window rattle!

Window rattle!

Window rattle!

jomo
Senior Member
709
30-09-2017, 03:21 PM
#1
For some time now my pass door window rattles when the door gets closed with it part wound down, so yesterday as the weather was clod but dry i took the plunge to whip off the door card and have a look.

Last year i had a dent removed from the same door and thought that the garage may have left something un-clipped or some thing like that!

So off came the door card and i found that the plastic film that stops water getting into the car had evidence that the door card had very been removed, so goods knows how they got the den out? Anyway after looking at the inside of the door for about 30 i still was non the wiser! So armed with a 10mm socket i set about tightening all the bolts i could see, nothing still rattled like a 1970's Marina :thumbdown:

Just as i had given up i spotted a "stop" in the window runner with a 10mm bolt that was finger tight, 5 sec later my door was closing with the lovely sound of "thunk" without a rattle to be heard1 :biggrin::biggrin:

Martin.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
30-09-2017, 03:21 PM #1

For some time now my pass door window rattles when the door gets closed with it part wound down, so yesterday as the weather was clod but dry i took the plunge to whip off the door card and have a look.

Last year i had a dent removed from the same door and thought that the garage may have left something un-clipped or some thing like that!

So off came the door card and i found that the plastic film that stops water getting into the car had evidence that the door card had very been removed, so goods knows how they got the den out? Anyway after looking at the inside of the door for about 30 i still was non the wiser! So armed with a 10mm socket i set about tightening all the bolts i could see, nothing still rattled like a 1970's Marina :thumbdown:

Just as i had given up i spotted a "stop" in the window runner with a 10mm bolt that was finger tight, 5 sec later my door was closing with the lovely sound of "thunk" without a rattle to be heard1 :biggrin::biggrin:

Martin.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Phil01
Posting Freak
2,004
30-09-2017, 05:03 PM
#2
well done mate, thats all it could have been really and so nice when you have fixed it yourself, bet you keep opening and closing it now. Self satisfaction

1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Phil01
30-09-2017, 05:03 PM #2

well done mate, thats all it could have been really and so nice when you have fixed it yourself, bet you keep opening and closing it now. Self satisfaction


1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,

steviewevie
Posting Freak
7,993
30-09-2017, 11:36 PM
#3
Nice work :biggrin:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-09-2017, 11:36 PM #3

Nice work :biggrin:


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Sparkystav
Administrator
14,683
01-10-2017, 06:47 AM
#4
good work!

OutlawJapClub Admin Team
Sparkystav
01-10-2017, 06:47 AM #4

good work!


OutlawJapClub Admin Team

jomo
Senior Member
709
04-10-2017, 02:35 PM
#5
Phil01 well done mate, thats all it could have been really and so nice when you have fixed it yourself, bet you keep opening and closing it now. Self satisfaction

LOL, must admit i have found myself winding it down a few times as she closes it just to put a smile on my face. Big Grin

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
04-10-2017, 02:35 PM #5

Phil01 well done mate, thats all it could have been really and so nice when you have fixed it yourself, bet you keep opening and closing it now. Self satisfaction

LOL, must admit i have found myself winding it down a few times as she closes it just to put a smile on my face. Big Grin


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 0
Views 144
15-07-2020, 06:55 AM
Last Post by Dub///15
Replies 6
Views 387
16-12-2018, 11:11 AM
Last Post by Barry
Replies 6
Views 448
31-10-2017, 05:17 AM
Last Post by Lexuspat
Replies 9
Views 451
17-10-2017, 01:20 PM
Last Post by Rabster
Replies 8
Views 376
06-05-2017, 01:04 PM
Last Post by parthiban
Replies 6
Views 343
25-01-2017, 10:32 AM
Last Post by Lexusboy
Replies 18
Views 720
06-11-2016, 07:46 AM
Last Post by jay_russell