SPC Horsham Project IS 550
SPC Horsham Project IS 550
30-06-2016, 01:17 AM
SPC have now put a turbo on it, along with AEM ECU. It's still running on standard internals and standard injectors, and they've dyno'd it at 263 bhp at 0.6 bar.
Not sure if they're going to push up the bhp and see when/how it breaks, or switch to upgraded internals next ?
![[Image: IMG_2602.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_2602.jpg)
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-06-2016, 01:17 AM #1Some of you may well have seen Bandit's old motor at some shows recently (pic of engine bay at that stage below). At that stage it was just running standard, i.e. no forced induction etc.
SPC have now put a turbo on it, along with AEM ECU. It's still running on standard internals and standard injectors, and they've dyno'd it at 263 bhp at 0.6 bar.
Not sure if they're going to push up the bhp and see when/how it breaks, or switch to upgraded internals next ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
30-06-2016, 01:24 AM
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
30-06-2016, 01:24 AM #2ill be more than happy with that figure
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
30-06-2016, 01:32 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-06-2016, 01:32 AM #3With the IS200, as I understand it, I think it's pretty well accepted that it can run up to around 250-260 bhp on standard internals. But as I said in another thread, exactly what the main weak point is with the internals is under debate. Perhaps SPC will be able to find out once and for all ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
30-06-2016, 01:55 AM
also I would be happy with a turbo running 260bhp tbh depending on the cost to get it ofcourse :p
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
30-06-2016, 01:55 AM #4I hope they do push the internals to the limit also I would be happy with a turbo running 260bhp tbh depending on the cost to get it ofcourse :p
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
30-06-2016, 02:08 AM
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
30-06-2016, 02:08 AM #5id be happy with 259bhp
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
30-06-2016, 02:12 AM
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
30-06-2016, 02:12 AM #6not for me 260 no less :p just kidding na as you say aaron anywhere around the 250 mark would be good but it all depends on cost I'm not going to pay 4k for 250bhp but if we are talking around the 1-2k mark then it becomes worth while
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
30-06-2016, 03:23 AM
Marsdendean I doubt its 1 - 2k when a charger costs that kind of money fitted. One problem with the lex's. Need a lot of £££ for little power.
My old leon could get from 110bhp to 145bhp for £350 remap!
Well the manifold is £800 quid, A decent turbo about the same to a grand
the ecu i would imagine being the same again.
plus intercooler/dump valve/pipework/fitting/mapping.
I'd imagine your looking at £4k maybe a little more
But then your at the limit, for ANY more (even a few bhp) you'll more than likely have to do the internals etc and your prob looking at the same again for that including fitting etc.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
30-06-2016, 03:23 AM #8Marsdendean I doubt its 1 - 2k when a charger costs that kind of money fitted. One problem with the lex's. Need a lot of £££ for little power.
My old leon could get from 110bhp to 145bhp for £350 remap!
Well the manifold is £800 quid, A decent turbo about the same to a grand
the ecu i would imagine being the same again.
plus intercooler/dump valve/pipework/fitting/mapping.
I'd imagine your looking at £4k maybe a little more
But then your at the limit, for ANY more (even a few bhp) you'll more than likely have to do the internals etc and your prob looking at the same again for that including fitting etc.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
30-06-2016, 03:32 AM
I know it was far fetched i'm just saying if they could have got a kit so to speak for around that then it would have made it interesting.
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
30-06-2016, 03:32 AM #9which then makes it not worth the money as your better off going the engine conversion route
I know it was far fetched i'm just saying if they could have got a kit so to speak for around that then it would have made it interesting.
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
30-06-2016, 03:33 AM
Sparkystav Well the manifold is £800 quid, A decent turbo about the same to a grand
the ecu i would imagine being the same again.
plus intercooler/dump valve/pipework/fitting/mapping.
I'd imagine your looking at £4k maybe a little more
But then your at the limit, for ANY more (even a few bhp) you'll more than likely have to do the internals etc and your prob looking at the same again for that including fitting etc.
What Stav said. Sorry Dan, but no way are you going to get it for 1-2K. And as Stav said, you'd have to bear in mind you're on the limit of the injectors/internals, so not sure what that means for long-term reliaibility, but it would make me nervous.
Edit - the engine swap route is just as expensive though.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-06-2016, 03:33 AM #10Sparkystav Well the manifold is £800 quid, A decent turbo about the same to a grand
the ecu i would imagine being the same again.
plus intercooler/dump valve/pipework/fitting/mapping.
I'd imagine your looking at £4k maybe a little more
But then your at the limit, for ANY more (even a few bhp) you'll more than likely have to do the internals etc and your prob looking at the same again for that including fitting etc.
What Stav said. Sorry Dan, but no way are you going to get it for 1-2K. And as Stav said, you'd have to bear in mind you're on the limit of the injectors/internals, so not sure what that means for long-term reliaibility, but it would make me nervous.
Edit - the engine swap route is just as expensive though.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
5 Guest(s)
5 Guest(s)
Recently Browsing
5 Guest(s)
5 Guest(s)
Related Threads…
Replies 5
Views 718
Views 718
21-05-2023, 10:36 PM
Last Post byFOSSIL FUELS
Last Post by
Replies 362
Views 31,499
Views 31,499
06-08-2022, 09:01 AM
Last Post byjohn wan
Last Post by
Replies 1,318
Views 95,915
Views 95,915
05-06-2022, 08:23 AM
Last Post bysarah0
Last Post by
Replies 509
Views 46,032
Views 46,032
02-03-2022, 03:36 PM
Last Post byRabster
Last Post by