for those of you who are getting a noise after fitting rear disks.
for those of you who are getting a noise after fitting rear disks.
heres some pics of what i mean and what to do.....
firstly remove the disk and you will see the inner backing plate you will see parts of this that are polished this is the part thats causing the noise...
![[Image: img0913a.jpg]](http://img819.imageshack.us/img819/7861/img0913a.jpg)
now take a hammer and hammer the polished part
![[Image: img0914ud.jpg]](http://img268.imageshack.us/img268/8356/img0914ud.jpg)
now check to see its pushed back far enough...
![[Image: img0915v.jpg]](http://img137.imageshack.us/img137/8917/img0915v.jpg)
check by putting the disk back on and listning for scrubbing job done...
and for those who want to adjust the handbrake but dont know how remove the wee rubber bung and look for this wee adjuster wheel and turn till the shoes are slightly scuffing
![[Image: img0917d.jpg]](http://img697.imageshack.us/img697/4756/img0917d.jpg)
hope that helps peeps
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
been meaning to do this for a while......help horrible noise after fitting rear disks.......my advise push the backing plates out the way.........try'd that not working.....theirs two backing plates............
heres some pics of what i mean and what to do.....
firstly remove the disk and you will see the inner backing plate you will see parts of this that are polished this is the part thats causing the noise...
now take a hammer and hammer the polished part
now check to see its pushed back far enough...
check by putting the disk back on and listning for scrubbing job done...
and for those who want to adjust the handbrake but dont know how remove the wee rubber bung and look for this wee adjuster wheel and turn till the shoes are slightly scuffing
hope that helps peeps
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Have some more rep
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Ormi some good info there mate .
Have some more rep
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
21-08-2017, 08:28 AM #3More great help Ormi, plus Rep
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
1 Guest(s)
1 Guest(s)
Views 231
Last Post by
Views 214
Last Post by
Views 154
Last Post by
Views 482
Last Post by
Views 177
Last Post by
Views 632
Last Post by