Grille connections
Grille connections
11-05-2018, 06:14 AM
jimxms If you do happen to measure them, can you post the sizes (pwetty plz). I need to get some too, but after ordering the wrong ones I spat the dummy and used zip ties :p
It'll probably be the weekend now, but i'll post the sizes up
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
jimxms If you do happen to measure them, can you post the sizes (pwetty plz). I need to get some too, but after ordering the wrong ones I spat the dummy and used zip ties :p
It'll probably be the weekend now, but i'll post the sizes up
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
18-05-2018, 01:03 AM
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Measured the clip. 18mm wide, 20mm high, to fit a 8mm hole. I reckon these are the closest fit :- http://cgi.ebay.co.uk/Toyota-Push-Rivet-...3caacface4
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
18-05-2018, 02:27 AM
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
I think i might just swing past B&Q on the way home from work and get some 8mm shiney bolts
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
18-05-2018, 02:36 AM
I had the same idea with some shiny red annodised bolts, but it didn't pan out too well.
Edited 29-06-2011, 12:11 PM by jimxms.
Just be aware that the push-pins that go into the holes that are part of the headlights are near impossible to access from behind and get a nut on. Hence the reason for needing these.
I had the same idea with some shiny red annodised bolts, but it didn't pan out too well.
23-05-2018, 01:15 AM
Ally Measured the clip. 18mm wide, 20mm high, to fit a 8mm hole. I reckon these are the closest fit :- http://cgi.ebay.co.uk/Toyota-Push-Rivet-...3caacface4
Ordered these ones in the end and they arrived on Saturday. Glad to say they are a perfect fit. They are actually better than the original ones, as they are a push pull fit rather than the plastic screw type that gets chewed up with the screwdriver. I got a bag of 20 so i'll bring a few to JAE if anyone wants to upgrade :wink:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Ally Measured the clip. 18mm wide, 20mm high, to fit a 8mm hole. I reckon these are the closest fit :- http://cgi.ebay.co.uk/Toyota-Push-Rivet-...3caacface4
Ordered these ones in the end and they arrived on Saturday. Glad to say they are a perfect fit. They are actually better than the original ones, as they are a push pull fit rather than the plastic screw type that gets chewed up with the screwdriver. I got a bag of 20 so i'll bring a few to JAE if anyone wants to upgrade :wink:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
23-05-2018, 03:39 PM
Ally Measured the clip. 18mm wide, 20mm high, to fit a 8mm hole. I reckon these are the closest fit :- http://cgi.ebay.co.uk/Toyota-Push-Rivet-...3caacface4
Cheers fella, been meaning to measure mine for ages, just ordered me some too!
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Ally Measured the clip. 18mm wide, 20mm high, to fit a 8mm hole. I reckon these are the closest fit :- http://cgi.ebay.co.uk/Toyota-Push-Rivet-...3caacface4
Cheers fella, been meaning to measure mine for ages, just ordered me some too!
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 0
Views 275
Views 275
18-12-2021, 09:53 AM
Last Post byMatt_C
Last Post by
Replies 12
Views 888
Views 888
09-09-2016, 04:20 AM
Last Post byFirebirdPhil
Last Post by