My Toyota MR2 build thread - 1994 GT-S
My Toyota MR2 build thread - 1994 GT-S
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
21-09-2016, 06:27 AM #141haha, yep I can bet you one thing Phil the boxter would be easier to work on than the number 2 :p
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Going to look at an MR2 Tubby tomorrow - looks "nice" but will need a bit of suspension work to make it right for us, it is ever so low and we have speed humps at work that are fairly high. Good colour, slightly modified with a charge cooler, Century sticker (that gives 10BHP)!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-09-2016, 07:54 AM #142Boxters are a real mare to work on, even the engine is hidden away under covers, it takes just over 30 mins just to remove the engine covers etc to see the engine!!
Going to look at an MR2 Tubby tomorrow - looks "nice" but will need a bit of suspension work to make it right for us, it is ever so low and we have speed humps at work that are fairly high. Good colour, slightly modified with a charge cooler, Century sticker (that gives 10BHP)!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
21-09-2016, 08:06 AM #144definately pics up Phil
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
toxo Are you sure it's not mine :lol: Presumably you know what to look for, hope it works out
Need to make sure there is a turbo which doesn't smoke, paint is in good nick, kick the tyres etc, no seriously, anything particular to watch out for?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-09-2016, 08:52 AM #145toxo Are you sure it's not mine :lol: Presumably you know what to look for, hope it works out
Need to make sure there is a turbo which doesn't smoke, paint is in good nick, kick the tyres etc, no seriously, anything particular to watch out for?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Also, the power steering should disengage at 50mph. If it stays active until 80 then it has the wrong kind of speedo chip fitted. PS at 80 is a little scary!
Once it's warmed up find a nice straight road and nail it to the rev limiter in 2nd. Keep an eye out the back, any blue smoke walk away. Usual things like make sure it brakes in a straight line, no funny looking welds in the boot etc. Knocking from the front is knackered droplinks which is quite common. Make sure none of the wheels is too hot when you finish your testdrive (as you may have guessed, they have brakes that stick!). There's a better buyers guide on BenF's site: http://www.btinternet.com/~netsurf/mr2t/buyMR2T.html
Also, the power steering should disengage at 50mph. If it stays active until 80 then it has the wrong kind of speedo chip fitted. PS at 80 is a little scary!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-09-2016, 09:09 AM #147Cool you have PM, I won't take up your build thread any more.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Ordered the required parts including master cylinder from Toyota... won't leave me with much change from £400. Won't be in until the end of the month so I'm not going to put it in for the MOT until then. Need to readjust the handbrake too as it's ever so slightly on all the time on the passenger side.
Next stop seats!
Got the car back last night. Brake pedal travel is terrible but it does at least stop well. It pumps up and then slowly goes soft though so I'm not too sure it will pass an MOT
Ordered the required parts including master cylinder from Toyota... won't leave me with much change from £400. Won't be in until the end of the month so I'm not going to put it in for the MOT until then. Need to readjust the handbrake too as it's ever so slightly on all the time on the passenger side.
Next stop seats!
Hope you can get the brakes properly sorted soon. Bet you're looking forward to those seats though ! :biggrin:
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
23-09-2016, 06:11 AM #149Ouch ! :crying:
Hope you can get the brakes properly sorted soon. Bet you're looking forward to those seats though ! :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
3 Guest(s)
3 Guest(s)
Views 873
Last Post by
Views 1,458
Last Post by
Views 5,912
Last Post by
Views 3,084
Last Post by
Views 1,920
Last Post by
Views 6,359
Last Post by
Views 689
Last Post by
Views 855
Last Post by