Bigger pulley for my TTE charger kit
Bigger pulley for my TTE charger kit
lexusdaydreaming
29-06-2022, 07:19 AM #151i am going with e manage greedy ecu with 2zzge injectors. looks like 150mm pulley is best from what i have seen. just needed another opinion.
lexusdaydreaming
29-06-2022, 08:03 AM #153what bhp do you have? whats your set up if you dont mind me asking.
I have 155mm pulley 2zzge injectors greddy emanage ultimate De cat exhaust ik22 denso sparkplugs.
Not sur how much i have now cause i had a small boost leak now fixed and now have a full stainless exhaust 2,5 inch system and did some small changes to the mapping.
I gues i have around 240 hp now
Lastt dyno session i had 230hp with 330nm torque.
I have 155mm pulley 2zzge injectors greddy emanage ultimate De cat exhaust ik22 denso sparkplugs.
Not sur how much i have now cause i had a small boost leak now fixed and now have a full stainless exhaust 2,5 inch system and did some small changes to the mapping.
I gues i have around 240 hp now
lexusdaydreaming
30-06-2022, 02:31 AM #157am talking with guy who makes pulleys from euro loc and he said he is running 165mm with mrk 3 supra injectors 430cc and haltech ecu and running 275 bhp standard internals and 380 torque. now the ecu is stanalone and is around £1k new but i think ecu can be diffrent maybe for a more cheaper option but that power is what am looking for and wont push it more than that. i will get the emanage ecu with timming and injection harnesses and see what i get.
lexusdaydreaming
01-07-2022, 04:27 AM #15823250-42010 can anyone confirm that these injectors would fit for the lexus is200?
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-07-2022, 12:42 AM #159I don't think they will. They are low impedance, where are is200 has high impedance, you would need a resister pack as well
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
165 mm pulley 430 cc injec gets 270 bhp with maybe problems later.
so 155mm pulley and 370 380 cc injectors could get around 250 255 bhp
estimated with what others have got with there set ups.
so is there injectorsd that fit right in around 370 380 cc for the lexus is200 ?
i think if there is i will go for that so i am getting good bhp and torque but not enough to cause problems later.
lexusdaydreaming
02-07-2022, 02:48 AM #160done some more reading and i have found that 140mm 145mm you need 330 cc for 240bhp
165 mm pulley 430 cc injec gets 270 bhp with maybe problems later.
so 155mm pulley and 370 380 cc injectors could get around 250 255 bhp
estimated with what others have got with there set ups.
so is there injectorsd that fit right in around 370 380 cc for the lexus is200 ?
i think if there is i will go for that so i am getting good bhp and torque but not enough to cause problems later.
1 Guest(s)
1 Guest(s)
Views 844
Last Post by
Views 757
Last Post by
Views 300
Last Post by
Views 504
Last Post by
Views 640
Last Post by
Views 1,886
Last Post by
Views 391
Last Post by
Views 361
Last Post by
Views 576
Last Post by