JapCarForum Cars, Cars, Cars! Project Cars SPC Horsham Project IS 550

SPC Horsham Project IS 550

 Thread Closed
 Thread Closed

SPC Horsham Project IS 550

 Thread Closed
 Thread Closed
Pages (32): Previous 1 … 3 4 5 6 7 … 32 Next  
steviewevie
Posting Freak
Find
7,993
01-07-2016, 03:28 AM
#41
supratruck Intention is to drive it at 0.6 for a few month's and then turn up the wick , not scared to break it as we nead to see what goes when , Already have a short end with all internal.s ready to go .
It'll be very interesting to see what breaks and when. Which turbo are you running ?

Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?

Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?
[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-07-2016, 03:28 AM #41

supratruck Intention is to drive it at 0.6 for a few month's and then turn up the wick , not scared to break it as we nead to see what goes when , Already have a short end with all internal.s ready to go .
It'll be very interesting to see what breaks and when. Which turbo are you running ?

Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?

Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Dan_Turism0
Posting Freak
Find
2,825
01-07-2016, 03:33 AM
#42
lots of good questions there steve Smile
My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
01-07-2016, 03:33 AM #42

lots of good questions there steve Smile

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

Bandit
Posting Freak
Find
6,464
01-07-2016, 04:32 AM
#43
Mate be good to have you at JAE, was watching the dyno run of your supratruck earlier and thats a right animal and be good to see the old motor again :w00t:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
01-07-2016, 04:32 AM #43

Mate be good to have you at JAE, was watching the dyno run of your supratruck earlier and thats a right animal and be good to see the old motor again :w00t:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

steviewevie
Posting Freak
Find
7,993
01-07-2016, 04:39 AM
#44
Current pics of the car :

[Image: RIMG0901.jpg]

[Image: RIMG0907.jpg]
[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-07-2016, 04:39 AM #44

Current pics of the car :

[Image: RIMG0901.jpg]

[Image: RIMG0907.jpg]

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

SPChorsham.com
Member
Find
67
01-07-2016, 04:42 AM
#45
steviewevie It'll be very interesting to see what breaks and when. Which turbo are you running ?

Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?

Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?

Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar

Bigger injectors will be used to go further!!Confusedhock:
SPChorsham.com
01-07-2016, 04:42 AM #45

steviewevie It'll be very interesting to see what breaks and when. Which turbo are you running ?

Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?

Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?

Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar

Bigger injectors will be used to go further!!Confusedhock:

steviewevie
Posting Freak
Find
7,993
01-07-2016, 04:44 AM
#46
Which GT30 is it exactly ?

Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?

Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:
[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-07-2016, 04:44 AM #46

Which GT30 is it exactly ?

Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?

Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

aaronabbott
Posting Freak
Find
804
01-07-2016, 04:45 AM
#47
is550 Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar

Bigger injectors will be used to go further!!Confusedhock:

so if i was go go for this setup what would be the cost
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
01-07-2016, 04:45 AM #47

is550 Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar

Bigger injectors will be used to go further!!Confusedhock:

so if i was go go for this setup what would be the cost

ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers

supratruck
Member
Find
106
01-07-2016, 05:01 AM
#48
Gord You are more than welcome mate :thumbup: just need to pay and your in :thumbup:

Thank.s Gord , Put me down for coming :thumbup:
supratruck
01-07-2016, 05:01 AM #48

Gord You are more than welcome mate :thumbup: just need to pay and your in :thumbup:

Thank.s Gord , Put me down for coming :thumbup:

steviewevie
Posting Freak
Find
7,993
01-07-2016, 05:04 AM
#49
supratruck Thank.s Gord , Put me down for coming :thumbup:
Great ! :thumbup:

I've added you to the list. Which days are you coming, and do you want to camp by our stand ?

Please see this thread for details of how to pay etc :biggrin:
[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-07-2016, 05:04 AM #49

supratruck Thank.s Gord , Put me down for coming :thumbup:
Great ! :thumbup:

I've added you to the list. Which days are you coming, and do you want to camp by our stand ?

Please see this thread for details of how to pay etc :biggrin:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Lexusboy
Posting Freak
Website Find
9,267
01-07-2016, 05:06 AM
#50
Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.

I have added your name to the list.:thumbup1:
Lexusboy
01-07-2016, 05:06 AM #50

Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.

I have added your name to the list.:thumbup1:

Pages (32): Previous 1 … 3 4 5 6 7 … 32 Next  
Recently Browsing
 11 Guest(s)
Recently Browsing
 11 Guest(s)
Related Threads…
My Gto project :)
by Steff777
Replies 30
Views 1,842
04-04-2024, 03:25 PM
Last Post by DannyStock
My R34 project
by fastfu
Replies 10
Views 1,443
10-09-2023, 10:23 PM
Last Post by Jimbob-T-Lex
2005 saloon arched Impreza wagon project
by P3sk3tt
Replies 5
Views 718
21-05-2023, 10:36 PM
Last Post by FOSSIL FUELS
another is200 project
by john wan
Replies 362
Views 31,511
06-08-2022, 09:01 AM
Last Post by john wan
My little project - IS200 Turbo
by steviewevie
Replies 1,318
Views 95,915
05-06-2022, 08:23 AM
Last Post by sarah0
My latest project
by Xtremist
Replies 21
Views 2,780
03-03-2022, 09:52 AM
Last Post by Lexuspat
My Indecisive 4.0 V8 1UZ-FE Project
by toxo
Replies 509
Views 46,032
02-03-2022, 03:36 PM
Last Post by Rabster
my new project
by mikey bean
Replies 5
Views 1,802
16-11-2021, 12:10 PM
Last Post by Rabster
CX7 Turbo project
by icemahn
Replies 9
Views 3,884
11-11-2021, 01:10 AM
Last Post by Rabster
My Lexus is200 Project
by gsitlv
Replies 46
Views 7,853
19-10-2021, 02:11 AM
Last Post by Rabster