Door mirrors
Door mirrors
My problem is this. A while back, the up/down adjustment on one of my mirrors stopped working. I'm pretty sure that the motor burnt out due to water ingress into the car causing the motor to permanently try to adjust.
Anyway, I got a new mirror assembly from eBay. However, the body-coloured section (though the right colour for my car) is more scratched than my own one. So rather than swap the whole assembly, I'd like to do a mix and match.
On the existing door mirror, I took the mirror glass off, but it doesn't look straightforward to extract/replace the up/down motor, and the repair idea seems to be to swap the whole assembly (based on the workshop manual, and the fact that there aren't individual part numbers for the components).
What I might be able to do is swap the whole assemblies over. But then to swap back the body-coloured bit from my own car.
Has anyone taken this body-coloured bit off ? It looks to me like it probably pops out, but I thought I would ask before trying it out, since I seem to remember that someone might have tried this before.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-09-2017, 12:22 PM #1Has anyone taken apart a door mirror on an IS200/300 ? (or Altezza)
My problem is this. A while back, the up/down adjustment on one of my mirrors stopped working. I'm pretty sure that the motor burnt out due to water ingress into the car causing the motor to permanently try to adjust.
Anyway, I got a new mirror assembly from eBay. However, the body-coloured section (though the right colour for my car) is more scratched than my own one. So rather than swap the whole assembly, I'd like to do a mix and match.
On the existing door mirror, I took the mirror glass off, but it doesn't look straightforward to extract/replace the up/down motor, and the repair idea seems to be to swap the whole assembly (based on the workshop manual, and the fact that there aren't individual part numbers for the components).
What I might be able to do is swap the whole assemblies over. But then to swap back the body-coloured bit from my own car.
Has anyone taken this body-coloured bit off ? It looks to me like it probably pops out, but I thought I would ask before trying it out, since I seem to remember that someone might have tried this before.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
jay_russell
24-09-2017, 01:18 PM #3look in the workshop guide for my mirror blinkers mate there is all you need in that post
If you pop the mirror itself off you can see them, just unscrew and away it comes.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
24-09-2017, 01:24 PM #4The body coloured bit is held on by 3 or 4 screws.
If you pop the mirror itself off you can see them, just unscrew and away it comes.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
24-09-2017, 01:42 PM #6Mine are DEFINITELY screwed on so be careful
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Quote:Lexus IS200/300 Mirror Glass Removal
1) Move the mirror all the way up.
2) Insert a screw driver behind it and pry it upwards. This will release the lower portion of the mirror
3) Keep moving the mirror up and the upper section of the mirror should also come loose.
4) unplug the heater wires
5) There are 3 philips screws that hold the mirror cover in place (you should be able to see which ones they are).
6) Replace the mirror cover.
7) Putting it back is just the reverse
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Just found this some place too..
Quote:Lexus IS200/300 Mirror Glass Removal
1) Move the mirror all the way up.
2) Insert a screw driver behind it and pry it upwards. This will release the lower portion of the mirror
3) Keep moving the mirror up and the upper section of the mirror should also come loose.
4) unplug the heater wires
5) There are 3 philips screws that hold the mirror cover in place (you should be able to see which ones they are).
6) Replace the mirror cover.
7) Putting it back is just the reverse
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Hopefully the combination of the new mirror unit plus my original backing will be just what I need :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
25-09-2017, 12:28 AM #9Cool, thanks guys, just what I wanted :thumbup:
Hopefully the combination of the new mirror unit plus my original backing will be just what I need :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 749
Last Post by
Views 498
Last Post by
Views 993
Last Post by
Views 375
Last Post by