TRC and VSC light on
TRC and VSC light on
Anyone recommend a fault code reader that can read all types of fault codes, not just engine related,
Cheaper the better,
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
My TRC and VSC light came on last night, no engine fault codes.
Anyone recommend a fault code reader that can read all types of fault codes, not just engine related,
Cheaper the better,
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-10-2017, 09:16 AM #2Do you have a laptop you can use to plug in ? Because the cheapest solution is usually a suitable USB connector for a laptop, as opposed to a standalone code reader.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-10-2017, 09:18 AM #3When you say TRC is on, do you mean the "TRC OFF" light is on ? Or flashing ? Or is it the picture of the car skidding that is on ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
06-10-2017, 09:23 AM #4Did you not have a scangauge?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
The TRC OFF and VSC light comes on and stays on the moment the wheels start to turn, I guessing a speed sensor, just need to know what one.
Yes I have a laptop with usb, just concerned as a lot of readers will only read engine codes
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Hello steve
The TRC OFF and VSC light comes on and stays on the moment the wheels start to turn, I guessing a speed sensor, just need to know what one.
Yes I have a laptop with usb, just concerned as a lot of readers will only read engine codes
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Scan gauge did not pick up any other fault
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
hello stav, scan gauge did not pick anything up, only o2- sensors 2 bank 2, this has always been on and the heater elements is knackered on it
Scan gauge did not pick up any other fault
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Dark Samurai
06-10-2017, 09:34 AM #7Hey dad, pull the bulbs out xD
Na na I'm joking, but yeah, not good 
There's a way to read the codes that doesn't need a code reader though. Go to this link, see section 1©. That will make the warning lights blink in a pattern from which you can work out a two-digit fault code. However, this seems to say that the ABS and nrake warning lights should be on as well, so I'm not sure it's going to give you any codes if that's not on ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-10-2017, 10:34 AM #8You can get a load of "C" codes (as opposed to the engine "P" codes), e.g. to tell you that a specific speed sensor is having a problem, but I'm not clear on whether OBD-II readers will pick them up or not.
There's a way to read the codes that doesn't need a code reader though. Go to this link, see section 1©. That will make the warning lights blink in a pattern from which you can work out a two-digit fault code. However, this seems to say that the ABS and nrake warning lights should be on as well, so I'm not sure it's going to give you any codes if that's not on ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
as for the scangauge when we linked it to mine on the tunnel run it didnt pick anything up either when i had those mysterious troubles, maybe it doesnt like 300's?
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
06-10-2017, 10:53 AM #9b2s2 will cause all the vsc and trc lights of the dash to illuminate, and car goes into limp mode, i had that problem before. i think its the one in the middle of the exhaust, and so as soon as a bit of throttle is used it will cause it to fail. its a right pita mate.
as for the scangauge when we linked it to mine on the tunnel run it didnt pick anything up either when i had those mysterious troubles, maybe it doesnt like 300's?
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino b2s2 will cause all the vsc and trc lights of the dash to illuminate, and car goes into limp mode, i had that problem before.
Surely that'll bring up an engine check light and a code though ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-10-2017, 10:59 AM #10is300_dino b2s2 will cause all the vsc and trc lights of the dash to illuminate, and car goes into limp mode, i had that problem before.
Surely that'll bring up an engine check light and a code though ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 233
Last Post by
Views 409
Last Post by
Views 370
Last Post by