Router problems
Router problems
14-10-2017, 08:16 AM
The rev1&2 use a Texas Intruments AR7 chip wheras the V3 uses a broadcom chip which is much more stable and can deal with more noise on the line. The AR7 chip is so bad with high noise lines that quite a few ISPs will now not support them with intermittant connection issues.
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
Just a point with the Netgear DG834G. I agree with John that they are extremely stable - just make sure you get a rev 3 or above.
The rev1&2 use a Texas Intruments AR7 chip wheras the V3 uses a broadcom chip which is much more stable and can deal with more noise on the line. The AR7 chip is so bad with high noise lines that quite a few ISPs will now not support them with intermittant connection issues.
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
14-10-2017, 08:21 AM
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
On router choices Parthiban I'm swaying towards the Linksys (Cisco for home) range atm. Something like: http://www.overclockers.co.uk/showproduc...96&subcat=
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
14-10-2017, 10:28 AM
toxo Alternatively you could look into Draytek, whos products I've always found to be rock solid. Something like this should do:
http://www.draytek.co.uk/products/vigor2130.html
I've just ordered one of these :
http://www.draytek.co.uk/products/vigor2110.html
Draytek are supposed to be pretty reliable, as are Edimax.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-10-2017, 10:28 AM #17toxo Alternatively you could look into Draytek, whos products I've always found to be rock solid. Something like this should do:
http://www.draytek.co.uk/products/vigor2130.html
I've just ordered one of these :
http://www.draytek.co.uk/products/vigor2110.html
Draytek are supposed to be pretty reliable, as are Edimax.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
15-10-2017, 04:50 AM
edeath Just a point with the Netgear DG834G. I agree with John that they are extremely stable - just make sure you get a rev 3 or above.I'm not sure which revisions I have but they are different, but both aren't working :tongue_smilie:
The rev1&2 use a Texas Intruments AR7 chip wheras the V3 uses a broadcom chip which is much more stable and can deal with more noise on the line. The AR7 chip is so bad with high noise lines that quite a few ISPs will now not support them with intermittant connection issues.
edeath On router choices Parthiban I'm swaying towards the Linksys (Cisco for home) range atm. Something like: http://www.overclockers.co.uk/showproduc...96&subcat=Thanks for that, that's definitely cheaper than the proper cisco stuff and assuming it's still got decent quality components in could be a good buy.
Coming to think of it I've got a linksys router in the place in Florida and that is rock solid which gives me confidence to buy one of these. Doesn't seem they do wireless N access points though which rules out the option of separating the wired and wireless functions, but as long as it works I don't mind too much.
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
edeath Just a point with the Netgear DG834G. I agree with John that they are extremely stable - just make sure you get a rev 3 or above.I'm not sure which revisions I have but they are different, but both aren't working :tongue_smilie:
The rev1&2 use a Texas Intruments AR7 chip wheras the V3 uses a broadcom chip which is much more stable and can deal with more noise on the line. The AR7 chip is so bad with high noise lines that quite a few ISPs will now not support them with intermittant connection issues.
edeath On router choices Parthiban I'm swaying towards the Linksys (Cisco for home) range atm. Something like: http://www.overclockers.co.uk/showproduc...96&subcat=Thanks for that, that's definitely cheaper than the proper cisco stuff and assuming it's still got decent quality components in could be a good buy.
Coming to think of it I've got a linksys router in the place in Florida and that is rock solid which gives me confidence to buy one of these. Doesn't seem they do wireless N access points though which rules out the option of separating the wired and wireless functions, but as long as it works I don't mind too much.
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
15-10-2017, 06:13 AM
Marsdendean I just got one of the ones from Virgin (home hub) and everytime the PC goes off and on, it can't connect for some reason??
It looks like the PC is loosing the IP address? Sorry for the thread steal!
My laser printer did that, so I gave it a static IP address which solved the problem.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
15-10-2017, 06:13 AM #19Marsdendean I just got one of the ones from Virgin (home hub) and everytime the PC goes off and on, it can't connect for some reason??
It looks like the PC is loosing the IP address? Sorry for the thread steal!
My laser printer did that, so I gave it a static IP address which solved the problem.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
15-10-2017, 09:39 AM
Each peripheral will be different.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
15-10-2017, 09:39 AM #20With the printer, I looked in the instruction manual and then threw that away and asked tech support, as it needed an access code to enter engineer mode.
Each peripheral will be different.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 3
Views 224
Views 224
10-08-2018, 02:20 PM
Last Post bySaraj
Last Post by
Replies 33
Views 877
Views 877
19-10-2017, 02:20 AM
Last Post byparthiban
Last Post by
Replies 9
Views 420
Views 420
18-02-2017, 12:03 AM
Last Post byedeath
Last Post by
Replies 17
Views 1,106
Views 1,106
25-12-2016, 07:40 AM
Last Post byparthiban
Last Post by
Replies 9
Views 334
Views 334
22-12-2016, 04:17 AM
Last Post bysteviewevie
Last Post by
Replies 29
Views 909
Views 909
02-11-2016, 02:10 AM
Last Post byparthiban
Last Post by