My Toyota MR2 build thread - 1994 GT-S
My Toyota MR2 build thread - 1994 GT-S
21-10-2017, 04:56 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
21-10-2017, 04:56 AM #531tanks John. will look into it in the new year.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
22-10-2017, 04:19 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
22-10-2017, 04:19 AM #533Any idea what they were before?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
22-10-2017, 06:10 AM
Phil, do you have the emissions figures for when you had trouble with your MOT? Would be interesting to compare!
Speedo converter installed and everything back together, all working lovely and only had to solder 1 wire in the dash loom. Tactile difference to steering response, feels more planted. That might just be psychological though :lol:
Phil, do you have the emissions figures for when you had trouble with your MOT? Would be interesting to compare!
22-10-2017, 06:44 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
22-10-2017, 06:44 AM #536I can dig them out, will look tonight.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
27-10-2017, 03:02 AM
- Amp board & subs reinstalled Needs to be redone, power now redone
- Speaker wire repair for driver's door components DONE x 2
- Alarm siren & engine bay switch working DONE
- Alarm total closure DONE
- HKS CAMP installed DONE
- Omori 45mm boost gauge fitted in-dash DONE
- HKS SSQV fitted DONE
- Accessory Fuse & Relay box installed DONE
- Fan kit fitted DONE
- Intercooler out DONE
- Exhaust flexi repair DONE
- Wire up rear foglights using UK MR2 parts (indicator in instrument panel, proper toyota switch etc) DONE
- New Oil & Water pumps DONE
- New rear pads & discs DONE
- Fit Brakes International refurbed rear brake calipers DONE
- New heater controls, boot & fuel flap release & driver's carpet DONE
- Gearbox bellhousing repair DONE
- TRD torque mounts DONE
- Fidanza flywheel fitted with ARP bolts DONE
- Goodridge braided clutch line DONE
- Goodridge braided brake lines DONE
- Electric mirror control repair DONE, New controller fitted
- Fit new brake master cylinder DONE
- Modify new seats with Waeco heater elements DONE
- New Alternator belt DONE, tightened
- New ECU water temp sensor DONE
- Front bumper repair (fibreglass) DONE
- Diagnose chargecooler leak DONE
- Fit new seats, including figuring out how to mount the seatbelt clips DONE
- Fit wiring loom + switches etc for new seats Still needs doing passenger side
- 2 new front tyres + wheel alignment DONE
- New aircon belt DONE
- New driveshafts and ATS CV joints DONE
- Relocate chargecooler pump to aleviate ground clearance problems DONE
- Convert to ST205 ECU DONE
- Fit OEM retracting wingmirrors DONE
- Fit Walbro fuel pump
- Alarm boot release Broken rear lock removed, pull release connected up in a much more sensible way than Toyota's & solenoid added, just needs cabling to the new fusebox
- Side strip mounts repaired
- Front Foglights reinstalled
- Reversing camera reinstalled
- Engine bay cleanup (powder coated rocker cover + inlet manifold + chargecooler, hoses colour coordinated, some new gaskets & clean up oil leak) DONE
- Painted and stickered calipers
- Fit new rear brake sliders & pins Painted, still need fitting
- Properly fix brake hoses to mounting points on car
- PDR to boot lid and bonnet (paintless dent removal)
- Convert to heated wingmirrors
- Replace crossthreaded stud in front wheel spacer DONE
- New wheel nuts (thinking RAYS gunmetal ones) DONE
- Finish wiring up head unit properly (i.e. reversing camera)
- Fit KCA-BT200 Kenwood / Parrot bluetooth unit
- New front pads
- Replace front driver's side wheel bearing, possibly passenger rear as well
- Replace balljoints
- Replace bent front suspension arms with new adjustable arms & replacement Toyota ones
- Finish polybushing & write a guide!
- Visit to WIM again following above 4 items
- Bodyshop visit again
- New windscreen wipers and brighter headlamps (not really a big item but here to remind me!)
- Replace fuel sender
Return of the list!
- Amp board & subs reinstalled Needs to be redone, power now redone
- Speaker wire repair for driver's door components DONE x 2
- Alarm siren & engine bay switch working DONE
- Alarm total closure DONE
- HKS CAMP installed DONE
- Omori 45mm boost gauge fitted in-dash DONE
- HKS SSQV fitted DONE
- Accessory Fuse & Relay box installed DONE
- Fan kit fitted DONE
- Intercooler out DONE
- Exhaust flexi repair DONE
- Wire up rear foglights using UK MR2 parts (indicator in instrument panel, proper toyota switch etc) DONE
- New Oil & Water pumps DONE
- New rear pads & discs DONE
- Fit Brakes International refurbed rear brake calipers DONE
- New heater controls, boot & fuel flap release & driver's carpet DONE
- Gearbox bellhousing repair DONE
- TRD torque mounts DONE
- Fidanza flywheel fitted with ARP bolts DONE
- Goodridge braided clutch line DONE
- Goodridge braided brake lines DONE
- Electric mirror control repair DONE, New controller fitted
- Fit new brake master cylinder DONE
- Modify new seats with Waeco heater elements DONE
- New Alternator belt DONE, tightened
- New ECU water temp sensor DONE
- Front bumper repair (fibreglass) DONE
- Diagnose chargecooler leak DONE
- Fit new seats, including figuring out how to mount the seatbelt clips DONE
- Fit wiring loom + switches etc for new seats Still needs doing passenger side
- 2 new front tyres + wheel alignment DONE
- New aircon belt DONE
- New driveshafts and ATS CV joints DONE
- Relocate chargecooler pump to aleviate ground clearance problems DONE
- Convert to ST205 ECU DONE
- Fit OEM retracting wingmirrors DONE
- Fit Walbro fuel pump
- Alarm boot release Broken rear lock removed, pull release connected up in a much more sensible way than Toyota's & solenoid added, just needs cabling to the new fusebox
- Side strip mounts repaired
- Front Foglights reinstalled
- Reversing camera reinstalled
- Engine bay cleanup (powder coated rocker cover + inlet manifold + chargecooler, hoses colour coordinated, some new gaskets & clean up oil leak) DONE
- Painted and stickered calipers
- Fit new rear brake sliders & pins Painted, still need fitting
- Properly fix brake hoses to mounting points on car
- PDR to boot lid and bonnet (paintless dent removal)
- Convert to heated wingmirrors
- Replace crossthreaded stud in front wheel spacer DONE
- New wheel nuts (thinking RAYS gunmetal ones) DONE
- Finish wiring up head unit properly (i.e. reversing camera)
- Fit KCA-BT200 Kenwood / Parrot bluetooth unit
- New front pads
- Replace front driver's side wheel bearing, possibly passenger rear as well
- Replace balljoints
- Replace bent front suspension arms with new adjustable arms & replacement Toyota ones
- Finish polybushing & write a guide!
- Visit to WIM again following above 4 items
- Bodyshop visit again
- New windscreen wipers and brighter headlamps (not really a big item but here to remind me!)
- Replace fuel sender
27-10-2017, 02:06 PM
hock:hock:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Thats one epic list hock:hock:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
28-10-2017, 03:46 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
28-10-2017, 03:46 AM #539John you missed off one tiny but annoying point: Chase Amplifier whine.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
28-10-2017, 04:08 AM
2tongues John you missed off one tiny but annoying point: Chase Amplifier whine.
There's less of that these days, since I redid the power wiring for the amp board. Still some there but it doesn't rise with volume, it's at a constant level, so I just turn the music up
2tongues John you missed off one tiny but annoying point: Chase Amplifier whine.
There's less of that these days, since I redid the power wiring for the amp board. Still some there but it doesn't rise with volume, it's at a constant level, so I just turn the music up
Recently Browsing
10 Guest(s)
10 Guest(s)
Recently Browsing
10 Guest(s)
10 Guest(s)
Related Threads…
Replies 19
Views 876
Views 876
31-10-2023, 10:05 PM
Last Post byRCarter
Last Post by
Replies 20
Views 1,458
Views 1,458
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 95
Views 5,926
Views 5,926
06-10-2023, 02:58 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,086
Views 3,086
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by
Replies 28
Views 1,922
Views 1,922
17-05-2023, 11:25 AM
Last Post byIS200_rider
Last Post by
Replies 54
Views 6,360
Views 6,360
05-05-2023, 01:09 PM
Last Post bySparkystav
Last Post by
Replies 7
Views 689
Views 689
25-03-2023, 12:20 AM
Last Post byAll Motor
Last Post by
Replies 10
Views 856
Views 856
18-03-2023, 01:09 PM
Last Post byFOSSIL FUELS
Last Post by