JapCarForum Cars, Cars, Cars! General Car Maintenance Is200 Engine Bay Bolts

Is200 Engine Bay Bolts

Is200 Engine Bay Bolts

Pages (3): 1 2 3 Next
Rabster
Posting Freak
10,234
09-03-2018, 10:42 AM
#1
OK so does any one have a detailed list of the bolts in the is200/300/altezza engine bay.

there is a company that offers them for the Is300 in the states but by all accounts not for the is200....

for example

The main engine cover is held on by M6x25 (one is M6x35)

The VVTi cover is held on by M6x25

And the fuse box covers are M6x20

thanks to sprinter2012 for the above



Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]
Rabster
09-03-2018, 10:42 AM #1

OK so does any one have a detailed list of the bolts in the is200/300/altezza engine bay.

there is a company that offers them for the Is300 in the states but by all accounts not for the is200....

for example

The main engine cover is held on by M6x25 (one is M6x35)

The VVTi cover is held on by M6x25

And the fuse box covers are M6x20

thanks to sprinter2012 for the above




Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

Cous3
Member
211
09-03-2018, 12:04 PM
#2
Rab I changed quite a few of those bolts for stainless steel ones, I thought there was a list somewhere because I got a selection of the right sizes before I started.

I think I may have just ordered a dozen of each size on Ebay at the time so I had spares, what I do know is I used them all up when I put the bonnet struts on. They are only a small mod but make a hige differance.

Keith

[Image: 396337444.jpg]
Cous3
09-03-2018, 12:04 PM #2

Rab I changed quite a few of those bolts for stainless steel ones, I thought there was a list somewhere because I got a selection of the right sizes before I started.

I think I may have just ordered a dozen of each size on Ebay at the time so I had spares, what I do know is I used them all up when I put the bonnet struts on. They are only a small mod but make a hige differance.

Keith


[Image: 396337444.jpg]

is300_dino
Posting Freak
3,556
09-03-2018, 12:31 PM
#3
andy there is this site ive found dont know if its the same one but you should see how much it is for a full titanium kit for the 300.... $541.98!!! thats rediculous

see here
http://www.dressupbolts.com/products/pro...-1998-2005

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
09-03-2018, 12:31 PM #3

andy there is this site ive found dont know if its the same one but you should see how much it is for a full titanium kit for the 300.... $541.98!!! thats rediculous

see here
http://www.dressupbolts.com/products/pro...-1998-2005


jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

Rabster
Posting Freak
10,234
09-03-2018, 12:43 PM
#4
Yeah that's the company I found I'm sure we can make our own kits a darn bit cheaper lol



Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]
Rabster
09-03-2018, 12:43 PM #4

Yeah that's the company I found I'm sure we can make our own kits a darn bit cheaper lol




Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

is300_dino
Posting Freak
3,556
09-03-2018, 12:45 PM
#5
i should hope so mate! they have got quite a few pics of the some of the kit its just getting all the right lenghts

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
09-03-2018, 12:45 PM #5

i should hope so mate! they have got quite a few pics of the some of the kit its just getting all the right lenghts


jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

Lexuspat
Administrator
6,827
09-03-2018, 10:15 PM
#6
Surely you could get the bolts cheaper I've found loads of stainless steel ones on flebay for not a lot even found titanium ones

Don't think I want to spend anywhere near $500 on bolts that's for sure

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
09-03-2018, 10:15 PM #6

Surely you could get the bolts cheaper I've found loads of stainless steel ones on flebay for not a lot even found titanium ones

Don't think I want to spend anywhere near $500 on bolts that's for sure


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Rabster
Posting Freak
10,234
09-03-2018, 11:00 PM
#7
yah thats my feeling i know i can get them in bulk and alot cheaper the catch is trying to narrow down exactly what is required....



Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]
Rabster
09-03-2018, 11:00 PM #7

yah thats my feeling i know i can get them in bulk and alot cheaper the catch is trying to narrow down exactly what is required....




Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

toxo
Posting Freak
4,843
10-03-2018, 12:48 AM
#8
You best get measuring then Smile
toxo
10-03-2018, 12:48 AM #8

You best get measuring then Smile

jomo
Senior Member
709
10-03-2018, 07:43 AM
#9
Why not ask Demon (who's breaking his is200) to strip out all the nuts n bolts of his eng bay with lables of where they came from, and send them to you so you can match them up?

Just my 2p worth.......

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
10-03-2018, 07:43 AM #9

Why not ask Demon (who's breaking his is200) to strip out all the nuts n bolts of his eng bay with lables of where they came from, and send them to you so you can match them up?

Just my 2p worth.......


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Rabster
Posting Freak
10,234
22-03-2018, 04:46 AM
#10
right im placing an order today hopefully for the following

20 x M6 x 15 Stainless A2 Grade Allen Key button Head
20 x M6 x 20 Stainless A2 Grade Allen Key button Head
20 x M6 x 25 Stainless A2 Grade Allen Key button Head
20 x M6 x 30 Stainless A2 Grade Allen Key button Head
20 x M6 x 35 Stainless A2 Grade Allen Key button Head

10 x M4 x 15 Stainless A2 Grade Allen Key button Head
10 x M4 x 20 Stainless A2 Grade Allen Key button Head
10 x M4 x 30 Stainless A2 Grade Allen Key button Head

10 x M5 x 15 Stainless A2 Grade Allen Key button Head
10 x M5 x 20 Stainless A2 Grade Allen Key button Head
10 x M5 x 30 Stainless A2 Grade Allen Key button Head

60 x M6 x Stainless Washer A2 Grade
40 x M6 x Stainless Penny Washer A2 Grade
60 x M6 x Stainless Nuts A2 Grade


can anyone think of anything else i may need size wise anything that i dont use from my list will then go to make more kits up for people.....



Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]
Rabster
22-03-2018, 04:46 AM #10

right im placing an order today hopefully for the following

20 x M6 x 15 Stainless A2 Grade Allen Key button Head
20 x M6 x 20 Stainless A2 Grade Allen Key button Head
20 x M6 x 25 Stainless A2 Grade Allen Key button Head
20 x M6 x 30 Stainless A2 Grade Allen Key button Head
20 x M6 x 35 Stainless A2 Grade Allen Key button Head

10 x M4 x 15 Stainless A2 Grade Allen Key button Head
10 x M4 x 20 Stainless A2 Grade Allen Key button Head
10 x M4 x 30 Stainless A2 Grade Allen Key button Head

10 x M5 x 15 Stainless A2 Grade Allen Key button Head
10 x M5 x 20 Stainless A2 Grade Allen Key button Head
10 x M5 x 30 Stainless A2 Grade Allen Key button Head

60 x M6 x Stainless Washer A2 Grade
40 x M6 x Stainless Penny Washer A2 Grade
60 x M6 x Stainless Nuts A2 Grade


can anyone think of anything else i may need size wise anything that i dont use from my list will then go to make more kits up for people.....




Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

Pages (3): 1 2 3 Next
Recently Browsing
 6 Guest(s)
Recently Browsing
 6 Guest(s)
Related Threads…
Replies 0
Views 359
09-11-2023, 11:04 AM
Last Post by Keeperlit19
Replies 0
Views 722
28-06-2022, 04:42 AM
Last Post by MichaelTTE
Replies 3
Views 993
08-11-2021, 10:57 AM
Last Post by Morango
Replies 7
Views 1,513
22-07-2021, 03:46 AM
Last Post by simon87
Replies 0
Views 611
17-03-2021, 09:57 AM
Last Post by iceman
Replies 6
Views 971
17-02-2021, 08:43 AM
Last Post by dimis
Replies 4
Views 861
11-02-2021, 11:27 AM
Last Post by Sparkystav
Replies 4
Views 894
28-01-2021, 06:18 AM
Last Post by 1374lee
Replies 5
Views 1,079
27-01-2021, 04:28 PM
Last Post by rob
Replies 3
Views 967
27-01-2021, 01:37 AM
Last Post by Sparkystav