Is200 Engine Bay Bolts
Is200 Engine Bay Bolts
there is a company that offers them for the Is300 in the states but by all accounts not for the is200....
for example
The main engine cover is held on by M6x25 (one is M6x35)
The VVTi cover is held on by M6x25
And the fuse box covers are M6x20
thanks to sprinter2012 for the above
OK so does any one have a detailed list of the bolts in the is200/300/altezza engine bay.
there is a company that offers them for the Is300 in the states but by all accounts not for the is200....
for example
The main engine cover is held on by M6x25 (one is M6x35)
The VVTi cover is held on by M6x25
And the fuse box covers are M6x20
thanks to sprinter2012 for the above
I think I may have just ordered a dozen of each size on Ebay at the time so I had spares, what I do know is I used them all up when I put the bonnet struts on. They are only a small mod but make a hige differance.
Keith
![[Image: 396337444.jpg]](http://pic50.picturetrail.com/VOL482/3191867/20414961/396337444.jpg)
Rab I changed quite a few of those bolts for stainless steel ones, I thought there was a list somewhere because I got a selection of the right sizes before I started.
I think I may have just ordered a dozen of each size on Ebay at the time so I had spares, what I do know is I used them all up when I put the bonnet struts on. They are only a small mod but make a hige differance.
Keith
see here
http://www.dressupbolts.com/products/pro...-1998-2005
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
09-03-2018, 12:31 PM #3andy there is this site ive found dont know if its the same one but you should see how much it is for a full titanium kit for the 300.... $541.98!!! thats rediculous
see here
http://www.dressupbolts.com/products/pro...-1998-2005
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
09-03-2018, 12:45 PM #5i should hope so mate! they have got quite a few pics of the some of the kit its just getting all the right lenghts
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
Don't think I want to spend anywhere near $500 on bolts that's for sure
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Surely you could get the bolts cheaper I've found loads of stainless steel ones on flebay for not a lot even found titanium ones
Don't think I want to spend anywhere near $500 on bolts that's for sure
yah thats my feeling i know i can get them in bulk and alot cheaper the catch is trying to narrow down exactly what is required....
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
20 x M6 x 15 Stainless A2 Grade Allen Key button Head
20 x M6 x 20 Stainless A2 Grade Allen Key button Head
20 x M6 x 25 Stainless A2 Grade Allen Key button Head
20 x M6 x 30 Stainless A2 Grade Allen Key button Head
20 x M6 x 35 Stainless A2 Grade Allen Key button Head
10 x M4 x 15 Stainless A2 Grade Allen Key button Head
10 x M4 x 20 Stainless A2 Grade Allen Key button Head
10 x M4 x 30 Stainless A2 Grade Allen Key button Head
10 x M5 x 15 Stainless A2 Grade Allen Key button Head
10 x M5 x 20 Stainless A2 Grade Allen Key button Head
10 x M5 x 30 Stainless A2 Grade Allen Key button Head
60 x M6 x Stainless Washer A2 Grade
40 x M6 x Stainless Penny Washer A2 Grade
60 x M6 x Stainless Nuts A2 Grade
can anyone think of anything else i may need size wise anything that i dont use from my list will then go to make more kits up for people.....
right im placing an order today hopefully for the following
20 x M6 x 15 Stainless A2 Grade Allen Key button Head
20 x M6 x 20 Stainless A2 Grade Allen Key button Head
20 x M6 x 25 Stainless A2 Grade Allen Key button Head
20 x M6 x 30 Stainless A2 Grade Allen Key button Head
20 x M6 x 35 Stainless A2 Grade Allen Key button Head
10 x M4 x 15 Stainless A2 Grade Allen Key button Head
10 x M4 x 20 Stainless A2 Grade Allen Key button Head
10 x M4 x 30 Stainless A2 Grade Allen Key button Head
10 x M5 x 15 Stainless A2 Grade Allen Key button Head
10 x M5 x 20 Stainless A2 Grade Allen Key button Head
10 x M5 x 30 Stainless A2 Grade Allen Key button Head
60 x M6 x Stainless Washer A2 Grade
40 x M6 x Stainless Penny Washer A2 Grade
60 x M6 x Stainless Nuts A2 Grade
can anyone think of anything else i may need size wise anything that i dont use from my list will then go to make more kits up for people.....
6 Guest(s)
6 Guest(s)
Views 359
Last Post by
Views 993
Last Post by
Views 1,513
Last Post by
Views 971
Last Post by
Views 861
Last Post by
Views 894
Last Post by
Views 1,079
Last Post by
Views 967
Last Post by