JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Engine & Transmission gearbox swap

gearbox swap

gearbox swap

Biglee 22
Junior Member
28
24-06-2018, 01:39 AM
#1
morning guys, just wondering how easy it is to swap my auto box for a manual box in my is200,i work at a car breakers and we have just had one come in and i can have whatever bits i need to do the swap.

I am assuming it will be something along the lines of;

Flywheel,
Clutch,
Gearbox,
Propshaft,
Pedal box/Clutch Master.
Some wiring/ECU ?,
Gearstick/Interior trim.

What about the diff ratios ? Will that be different too !? And I notice the speedometer is different but will the manual one just swap ?

I am hoping one of you may have already completed this swap and could just give a little guidance before we jump in and find all sorts of problems !!

Thanks in advance.
Lee
Biglee 22
24-06-2018, 01:39 AM #1

morning guys, just wondering how easy it is to swap my auto box for a manual box in my is200,i work at a car breakers and we have just had one come in and i can have whatever bits i need to do the swap.

I am assuming it will be something along the lines of;

Flywheel,
Clutch,
Gearbox,
Propshaft,
Pedal box/Clutch Master.
Some wiring/ECU ?,
Gearstick/Interior trim.

What about the diff ratios ? Will that be different too !? And I notice the speedometer is different but will the manual one just swap ?

I am hoping one of you may have already completed this swap and could just give a little guidance before we jump in and find all sorts of problems !!

Thanks in advance.
Lee

Sparkystav
Administrator
14,683
24-06-2018, 01:52 AM
#2
Erm its quite a bit of work.

youve listed most of the right parts, but then the ecu is linked with the key i think so youll need to sort that out. the diff shouldnt be a problem no.

OutlawJapClub Admin Team
Sparkystav
24-06-2018, 01:52 AM #2

Erm its quite a bit of work.

youve listed most of the right parts, but then the ecu is linked with the key i think so youll need to sort that out. the diff shouldnt be a problem no.


OutlawJapClub Admin Team

Stoney
Posting Freak
2,117
24-06-2018, 02:12 AM
#3
As Stav says, a lot of work! Never heard of it ever being done, although someone might have.

Personally I'd sell the auto and buy a manual. Unless the car holds sentimental value? That way you could get a Sport too!

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
24-06-2018, 02:12 AM #3

As Stav says, a lot of work! Never heard of it ever being done, although someone might have.

Personally I'd sell the auto and buy a manual. Unless the car holds sentimental value? That way you could get a Sport too!


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

DaveEdin
Posting Freak
5,657
24-06-2018, 02:40 AM
#4
Smile See, I'd consider an IS300 if I could get it as a manual - I'm just not a fan of automatics Big Grin

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
24-06-2018, 02:40 AM #4

Smile See, I'd consider an IS300 if I could get it as a manual - I'm just not a fan of automatics Big Grin


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

Rabster
Posting Freak
10,234
24-06-2018, 02:56 AM
#5
Almost finished has had the auto to manual conversion one....



Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]
Rabster
24-06-2018, 02:56 AM #5

Almost finished has had the auto to manual conversion one....




Follow us on Twitter and join us on Facebook


Contact me to get your video hosted on the club YouTube Account

[SIGPIC][/SIGPIC]

Biglee 22
Junior Member
28
24-06-2018, 03:00 AM
#6
i dont mind hard work lol,the key is not a problem as ive just installed a clifford alarm and remote start i took the chip out and put in the dash so all ive got too do is change that over. I was thinking off selling it and getting a manual but because it was a cat d car i dont know if i would get much for it but i will check and ive put in the clifford and started the hifi install in it, iam now in the mix of stripping the car as the car that came in the yard had black interior where mine is cream so i will so iam swapping that over, iam stripping the car at work now so if and when i do i will post some pics up,

cheers guys

lee
Biglee 22
24-06-2018, 03:00 AM #6

i dont mind hard work lol,the key is not a problem as ive just installed a clifford alarm and remote start i took the chip out and put in the dash so all ive got too do is change that over. I was thinking off selling it and getting a manual but because it was a cat d car i dont know if i would get much for it but i will check and ive put in the clifford and started the hifi install in it, iam now in the mix of stripping the car as the car that came in the yard had black interior where mine is cream so i will so iam swapping that over, iam stripping the car at work now so if and when i do i will post some pics up,

cheers guys

lee

Biglee 22
Junior Member
28
24-06-2018, 03:24 AM
#7
my friend just stripped his whole car to a bare shell to change the loom and autobox for manual ones, so he has a good idea of the work involved but still is not afraid lol.
Biglee 22
24-06-2018, 03:24 AM #7

my friend just stripped his whole car to a bare shell to change the loom and autobox for manual ones, so he has a good idea of the work involved but still is not afraid lol.

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 239
28-01-2021, 10:36 AM
Last Post by 1374lee
Replies 7
Views 284
29-08-2020, 11:41 AM
Last Post by Connor376
Replies 8
Views 480
01-09-2019, 03:22 PM
Last Post by JayJay1374
Replies 3
Views 312
19-07-2019, 02:44 AM
Last Post by el_bandido
Replies 3
Views 347
04-07-2019, 07:01 AM
Last Post by Mikey
Replies 28
Views 1,311
19-11-2018, 06:19 AM
Last Post by rob
Replies 1
Views 504
18-01-2018, 10:44 AM
Last Post by Sparkystav
Replies 2
Views 462
02-06-2017, 10:54 PM
Last Post by TM
Replies 8
Views 459
23-12-2016, 09:40 AM
Last Post by dimis
Replies 7
Views 436
02-11-2016, 10:07 AM
Last Post by aaronabbott