is200 centre armrest...all done for £10
is200 centre armrest...all done for £10
can try to explain without pics though
firstly remove centre console with cubby and lid.
remove lid from cubby hole.
turn over and remove 6 screws which hold ashtray and storage box.
this info can be found on this site or google bahamut cars is200.
Next push exposed end of armrest into the bottom of storage box you have just removed, this will leave marks from lugs on bottom of armrest,remove enough plastic with a knife ect so the lugs fit through hole.
Once you have done this you need a piece of metal rod slightly wider than the storage box.
Mark both sides of box just above the curve of armrest mounting bracket,drill a hole either side and a matching hole in centre console you have removed on one side only.
re-assemble centre console without armrest inserted and re-fit to car.
finally push armrest into storage box again,then you need to insert rod through hole in centre console a push through all the way until it holds armrest in place,you can add 2 self tapping screws in the mounting bracket as well if you wish.
Hope this makes sense, if not drop me a pm
Regards Ian.
sorry i havent been able to take any pics due to ending up in hospital to have op on my knee.
can try to explain without pics though
firstly remove centre console with cubby and lid.
remove lid from cubby hole.
turn over and remove 6 screws which hold ashtray and storage box.
this info can be found on this site or google bahamut cars is200.
Next push exposed end of armrest into the bottom of storage box you have just removed, this will leave marks from lugs on bottom of armrest,remove enough plastic with a knife ect so the lugs fit through hole.
Once you have done this you need a piece of metal rod slightly wider than the storage box.
Mark both sides of box just above the curve of armrest mounting bracket,drill a hole either side and a matching hole in centre console you have removed on one side only.
re-assemble centre console without armrest inserted and re-fit to car.
finally push armrest into storage box again,then you need to insert rod through hole in centre console a push through all the way until it holds armrest in place,you can add 2 self tapping screws in the mounting bracket as well if you wish.
Hope this makes sense, if not drop me a pm
Regards Ian.
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Moley has a walkthrough posted that shows how to fit an OEM arm rest; it might help the the initial steps getting to the point of fitting...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin Moley has a walkthrough posted that shows how to fit an OEM arm rest; it might help the the initial steps getting to the point of fitting...
Thanks for the link Dave.
DaveEdin Moley has a walkthrough posted that shows how to fit an OEM arm rest; it might help the the initial steps getting to the point of fitting...
Thanks for the link Dave.
IanS200 Once you have done this you need a piece of metal rod slightly wider than the storage box.
Mark both sides of box just above the curve of armrest mounting bracket,drill a hole either side and a matching hole in centre console you have removed on one side only.
re-assemble centre console without armrest inserted and re-fit to car.
finally push armrest into storage box again,then you need to insert rod through hole in centre console a push through all the way until it holds armrest in place,you can add 2 self tapping screws in the mounting bracket as well if you wish.
Hope this makes sense, if not drop me a pm
Regards Ian.
Makes perfect sense, so much so that I've just gone and done it :w00t:
Rough fit for now but you get the idea :thumbup1:
![[Image: IMG_20110902_160101.jpg]](https://lh5.googleusercontent.com/--cTJo68awPg/TmDyVAcAVfI/AAAAAAAAYNY/bD24UjVybD4/s640/IMG_20110902_160101.jpg)
Toyota Altezza Z Edition.
![[Image: sig.jpg]](http://i5.photobucket.com/albums/y196/todd69/sig.jpg)
IanS200 Once you have done this you need a piece of metal rod slightly wider than the storage box.
Mark both sides of box just above the curve of armrest mounting bracket,drill a hole either side and a matching hole in centre console you have removed on one side only.
re-assemble centre console without armrest inserted and re-fit to car.
finally push armrest into storage box again,then you need to insert rod through hole in centre console a push through all the way until it holds armrest in place,you can add 2 self tapping screws in the mounting bracket as well if you wish.
Hope this makes sense, if not drop me a pm
Regards Ian.
Makes perfect sense, so much so that I've just gone and done it :w00t:
Rough fit for now but you get the idea :thumbup1:
Toyota Altezza Z Edition.
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Lexuspat typical just been on ebay and cant find one
one here mate.
http://www.ebay.co.uk/itm/Stilo-01-07-Fr...1466wt_905
Lexuspat typical just been on ebay and cant find one
one here mate.
http://www.ebay.co.uk/itm/Stilo-01-07-Fr...1466wt_905
6 Guest(s)
6 Guest(s)
Views 252
Last Post by
Views 3,023
Last Post by
Views 282
Last Post by
Views 283
Last Post by
Views 737
Last Post by
Views 336
Last Post by
Views 1,825
Last Post by
Views 355
Last Post by