gearbox whine
gearbox whine
after fitting a new clutch i still had a whining noise, much like a release bearing noise (but that was replaced) when the clutch is up you can hear the noice, but when its down its silent. Since it had a new clutch all i can think of is the gearbox input shaft bearing?
the box has been replaced at some point, it also has a crunch in 3rd when cold, sounds like a new gearbox could be the cure?
JayJay1374
21-08-2019, 12:16 PM #1hello, i ment to post the 15,000 miles ago put kept forgetting lol.
after fitting a new clutch i still had a whining noise, much like a release bearing noise (but that was replaced) when the clutch is up you can hear the noice, but when its down its silent. Since it had a new clutch all i can think of is the gearbox input shaft bearing?
the box has been replaced at some point, it also has a crunch in 3rd when cold, sounds like a new gearbox could be the cure?
el_bandido
01-09-2019, 01:08 PM #4Lance79 A good squirt...
What are you thinking Lance, 40 weight... 50 weight?
See about this noise? Does it go away when you put a bit of pressure on the clutch pedal?
As for the crunch I don't know, could be synchro wear. I put this oil in mine and it eliminated the notchy shift between 1st and 2nd. It's worth a try.
http://www.opieoils.co.uk/p-1020-red-lin...0-gl4.aspx
Aw right! I never did get to see it, must get it out sometime!
See about this noise? Does it go away when you put a bit of pressure on the clutch pedal?
As for the crunch I don't know, could be synchro wear. I put this oil in mine and it eliminated the notchy shift between 1st and 2nd. It's worth a try.
http://www.opieoils.co.uk/p-1020-red-lin...0-gl4.aspx
JayJay1374
01-09-2019, 03:22 PM #9It's a whine when the clutch is up. You can hear it when driving. I think I'm just gonna swap the box over from my other lex!
2 Guest(s)
2 Guest(s)
Views 239
Last Post by
Views 461
Last Post by
Views 436
Last Post by